> On Thu, 2003-08-07 at 16:46, Blake Thornton wrote:
> > I've been struggling to get my dsl connection working (pppoe) and I bought
> > a router which I set up using a windows machine.
> > 
> > Now, when I boot up my linux (redhat 9) box, the eth0 connection fails to
> > come up and does not appear in `ifconfig`.
> > 
> > So, I figured that there is a problem recognizing my ethernet card.  Fine.
> > I've been told I might have to recompile the drivers.  Fine.  I don't know
> > how to do that but I can figure it out.
> 
> The first thing that would help us is if you told us what KIND of
> ethernet card you're using.  Dmesg output would be a bonus.

OK, any help is appreciated. Thanks in advance:

Linksys ethernet card (I'm not such which model though).

dmesg:
 BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 6Y060L0, ATA DISK drive
blk: queue c03be900, I/O limit 4095Mb (mask 0xffffffff)
hdc: LG CD-RW CED-8120B, ATAPI CD/DVD-ROM drive
hdd: SONY DVD-ROM DDU1612, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 120103200 sectors (61493 MB) w/2048KiB Cache, CHS=7476/255/63,
UDMA(100)
ide-floppy driver 0.99.newide
Partition check:
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 146k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 128k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 17:26:20 Mar 13 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 9 for device 00:07.2
PCI: Sharing IRQ 9 with 00:07.3
PCI: Sharing IRQ 9 with 00:0b.0
PCI: Sharing IRQ 9 with 00:0c.0
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 9 for device 00:07.3
PCI: Sharing IRQ 9 with 00:07.2
PCI: Sharing IRQ 9 with 00:0b.0
PCI: Sharing IRQ 9 with 00:0c.0
usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
hub.c: new USB device 00:07.2-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x781/0x9393) is not claimed by any active
driver.
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Adding Swap: 514040k swap-space (priority -1)
Adding Swap: 514040k swap-space (priority -2)
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi0 : SCSI emulation for USB Mass Storage devices
usb-uhci.c: interrupt, status 3, frame# 1851
  Vendor: Generic   Model: STORAGE DEVICE    Rev: 0119
  Type:   Direct-Access                      ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
USB Mass Storage support registered.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ohci1394: $Rev: 693 $ Ben Collins <[EMAIL PROTECTED]>
PCI: Found IRQ 11 for device 00:0d.0
PCI: Sharing IRQ 11 with 01:00.0
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[11]  MMIO=[f6800000-f68007ff]  Max
Packet=[2048]
ieee1394: SelfID completion called outside of bus reset!
ieee1394: Host added: Node[00:1023]  GUID[300050c500002269]  [Linux
OHCI-1394]
hub.c: new USB device 00:07.2-2, assigned address 3
usb-uhci.c: interrupt, status 2, frame# 949
hdd: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: LG        Model: CD-RW CED-8120B   Rev: 1.03
  Type:   CD-ROM                             ANSI SCSI revision: 02
usb_control/bulk_msg: timeout
scsi2 : SCSI emulation for USB Mass Storage devices
  Vendor: SanDisk   Model: ImageMate II      Rev: 1.30
  Type:   Direct-Access                      ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 24x/32x writer cd/rw xa/form2 cdda tray
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport_pc: Via 686A parallel port: io=0x378
ip_tables: (C) 2000-2002 Netfilter core team
8139too Fast Ethernet driver 0.9.26
PCI: Found IRQ 9 for device 00:0b.0
PCI: Sharing IRQ 9 with 00:07.2
PCI: Sharing IRQ 9 with 00:07.3
PCI: Sharing IRQ 9 with 00:0c.0
divert: allocating divert_blk for eth0
eth0: D-Link DFE-538TX (RealTek RTL8139) at 0xd894e000, 00:05:5d:2e:6d:6b,
IRQ 9
eth0:  Identified 8139 chip type 'RTL-8139C'
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
PCI: Found IRQ 9 for device 00:0c.0
PCI: Sharing IRQ 9 with 00:07.2
PCI: Sharing IRQ 9 with 00:07.3
PCI: Sharing IRQ 9 with 00:0b.0
divert: allocating divert_blk for eth1
eth1: ADMtek Comet rev 17 at 0xd8964000, 00:04:5A:58:1D:16, IRQ 9.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport_pc: Via 686A parallel port: io=0x378
lp0: using parport0 (polling).
lp0: console ready
es1371: version v0.32 time 17:27:43 Mar 13 2003
PCI: Found IRQ 10 for device 00:0e.0
es1371: found chip, vendor id 0x1274 device id 0x5880 revision 0x02
es1371: found es1371 rev 2 at io 0x9800 irq 10
es1371: features: joystick 0x0
ac97_codec: AC97  codec, id: TRA35 (TriTech TR A5)
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 0
usb-uhci.c: interrupt, status 3, frame# 1011
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08 
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.  
 sda: I/O error: dev 08:00, sector 0
 I/O error: dev 08:00, sector 0
 unable to read partition table
sdb : READ CAPACITY failed.
sdb : status = 1, message = 00, host = 0, driver = 08 
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sdb : block size assumed to be 512 bytes, disk size 1GB.  
 sdb: I/O error: dev 08:10, sector 0
 I/O error: dev 08:10, sector 0
 unable to read partition table
Device not ready.  Make sure there is a disc in the drive.
sdb : READ CAPACITY failed.
sdb : status = 1, message = 00, host = 0, driver = 08 
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sdb : block size assumed to be 512 bytes, disk size 1GB.  
 sdb: I/O error: dev 08:10, sector 0
 I/O error: dev 08:10, sector 0
 unable to read partition table
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
PPP Deflate Compression module registered
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
divert: not allocating divert_blk for non-ethernet device ppp0
divert: no divert_blk to free, ppp0 not ethernet
udf: registering filesystem
UDF-fs DEBUG lowlevel.c:57:udf_get_last_session: XA disk: no,
vol_desc_start=0
UDF-fs DEBUG super.c:1421:udf_read_super: Multi-session=0
UDF-fs DEBUG super.c:410:udf_vrs: Starting at sector 16 (2048 byte
sectors)
UDF-fs DEBUG super.c:437:udf_vrs: ISO9660 Primary Volume Descriptor found
UDF-fs DEBUG super.c:446:udf_vrs: ISO9660 Volume Descriptor Set Terminator
found
UDF-fs DEBUG super.c:753:udf_load_pvoldesc: recording time 1026340404/0,
2002/07/10 14:33 (1e20)
UDF-fs DEBUG super.c:763:udf_load_pvoldesc: volIdent[] = 'GROSS_ANATOMY'
UDF-fs DEBUG super.c:770:udf_load_pvoldesc: volSetIdent[] = '2ceaac2c'
UDF-fs DEBUG super.c:962:udf_load_logicalvol: Partition (0:0) type 1 on
volume 1
UDF-fs DEBUG super.c:972:udf_load_logicalvol: FileSet found in
LogicalVolDesc at block=0, partition=0
UDF-fs DEBUG super.c:800:udf_load_partdesc: Searching map: (0 == 0)
UDF-fs DEBUG super.c:882:udf_load_partdesc: Partition (0:0 type 1511)
starts at physical 276, block length 1874226
UDF-fs DEBUG super.c:1215:udf_load_partition: Using anchor in block 256
UDF-fs DEBUG super.c:1448:udf_read_super: Lastblock=0
UDF-fs DEBUG super.c:725:udf_find_fileset: Fileset at block=0, partition=0
UDF-fs DEBUG super.c:786:udf_load_fileset: Rootdir at block=2, partition=0
UDF-fs INFO UDF 0.9.6-rw (2002/03/11) Mounting volume 'GROSS_ANATOMY',
timestamp 2002/07/10 17:33 (1ed4)
hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdd: packet command error: error=0x54
ATAPI device hdd:
  Error: Illegal request -- (Sense key=0x05)
  Media region code is mismatched to logical unit -- (asc=0x6f, ascq=0x04)
  The failed "Report Key" packet command was: 
  "a4 00 00 00 01 92 00 00 00 0c c4 00 "
hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdd: packet command error: error=0x54
ATAPI device hdd:
  Error: Illegal request -- (Sense key=0x05)
  Command sequence error -- (asc=0x2c, ascq=0x00)
  The failed "Report Key" packet command was: 
  "a4 00 00 00 00 00 00 00 00 08 c0 00 "
hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdd: packet command error: error=0x54
ATAPI device hdd:
  Error: Illegal request -- (Sense key=0x05)
  Media region code is mismatched to logical unit -- (asc=0x6f, ascq=0x04)
  The failed "Report Key" packet command was: 
  "a4 00 00 00 06 db 00 00 00 0c c4 00 "
hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdd: packet command error: error=0x54
ATAPI device hdd:
  Error: Illegal request -- (Sense key=0x05)
  Command sequence error -- (asc=0x2c, ascq=0x00)
  The failed "Report Key" packet command was: 
  "a4 00 00 00 00 00 00 00 00 08 c0 00 "
hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdd: packet command error: error=0x54
ATAPI device hdd:
  Error: Illegal request -- (Sense key=0x05)
  Media region code is mismatched to logical unit -- (asc=0x6f, ascq=0x04)
  The failed "Report Key" packet command was: 
  "a4 00 00 00 08 18 00 00 00 0c c4 00 "
hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdd: packet command error: error=0x54
ATAPI device hdd:
  Error: Illegal request -- (Sense key=0x05)
  Command sequence error -- (asc=0x2c, ascq=0x00)
  The failed "Report Key" packet command was: 
  "a4 00 00 00 00 00 00 00 00 08 c0 00 "
hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdd: packet command error: error=0x54
ATAPI device hdd:
  Error: Illegal request -- (Sense key=0x05)
  Media region code is mismatched to logical unit -- (asc=0x6f, ascq=0x04)
  The failed "Report Key" packet command was: 
  "a4 00 00 1c 6a c2 00 00 00 0c c4 00 "
hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdd: packet command error: error=0x54
ATAPI device hdd:
  Error: Illegal request -- (Sense key=0x05)
  Command sequence error -- (asc=0x2c, ascq=0x00)
  The failed "Report Key" packet command was: 
  "a4 00 00 00 00 00 00 00 00 08 c0 00 "
hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdd: packet command error: error=0x54
ATAPI device hdd:
  Error: Illegal request -- (Sense key=0x05)
  Media region code is mismatched to logical unit -- (asc=0x6f, ascq=0x04)
  The failed "Report Key" packet command was: 
  "a4 00 00 1c 6b d1 00 00 00 0c c4 00 "
hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdd: packet command error: error=0x54
ATAPI device hdd:
  Error: Illegal request -- (Sense key=0x05)
  Command sequence error -- (asc=0x2c, ascq=0x00)
  The failed "Report Key" packet command was: 
  "a4 00 00 00 00 00 00 00 00 08 c0 00 "
hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdd: packet command error: error=0x54
ATAPI device hdd:
  Error: Illegal request -- (Sense key=0x05)
  Media region code is mismatched to logical unit -- (asc=0x6f, ascq=0x04)
  The failed "Report Key" packet command was: 
  "a4 00 00 00 08 18 00 00 00 0c c4 00 "
hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdd: packet command error: error=0x54
ATAPI device hdd:
  Error: Illegal request -- (Sense key=0x05)
  Command sequence error -- (asc=0x2c, ascq=0x00)
  The failed "Report Key" packet command was: 
  "a4 00 00 00 00 00 00 00 00 08 c0 00 "
loop: loaded (max 8 devices)
UDF-fs DEBUG lowlevel.c:57:udf_get_last_session: XA disk: no,
vol_desc_start=0
UDF-fs DEBUG super.c:1421:udf_read_super: Multi-session=0
UDF-fs DEBUG super.c:410:udf_vrs: Starting at sector 16 (2048 byte
sectors)
UDF-fs DEBUG super.c:437:udf_vrs: ISO9660 Primary Volume Descriptor found
UDF-fs DEBUG super.c:440:udf_vrs: ISO9660 Supplementary Volume Descriptor
found
UDF-fs DEBUG super.c:446:udf_vrs: ISO9660 Volume Descriptor Set Terminator
found
UDF-fs: No VRS found
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.




-- 
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list

Reply via email to