On Fri, 2003-07-25 at 06:57, [EMAIL PROTECTED] wrote: > Hi everyone, > I tryed to install two ethernet cards (Realteak 8139A and Realteak 8139C) on > a Pentium MMX 200Mhz, RH9A with no server X installed. > The system finds both the cards. > I started first putting one of them starting the system and when kudzu found it, > I gave a static configuration (192.168.0.1). > Then the other one, and I assigned another fixed ip (192.168.0.2). > > Then when I check the configuration with ifconfig, I find out that they took > the ip address from the dhcp server and I have 192.168.0.17 on one and 192.168.0.23 > on the other one. > > So I checked the configuration in /etc/sysconfig/network-script/ifcfg-eth0 / 1 > and, with surprise, there was the configuration I typed (0.1 and 0.2). > So I tryed with service network restart, but the result is the same. > > I tryed then running setup, but it let me change only one card (I remember that with > RH7.3 it was asking me first for one card, then for the other one.....) > so that I can set only one of them (witch one ???) > And it doesn't make difference, the ip still remain the same ! > > Where's the Trick? Am I missing something? > > Thanks > > Dario Dario, in that ifcfg file, check to see if there is a line referring to DHCP, make sure it says no, otherwise regardless of the values you enter, if it is set to use DHCP it will use the DHCP values.
-- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
