On Thu, 2003-03-27 at 09:17, Bored is me wrote: > alright, i commented out the HWADDR line, it made absolutly no difference. i > did the grep command, and this is what i got: > > [EMAIL PROTECTED] root]# grep eth /var/log/messages > Mar 23 18:55:37 localhost kernel: eth0: SMC1211TX EZCard 10/100 (RealTek > RTL8139 > ) at 0xc88a0000, 00:e0:29:95:97:85, IRQ 10 > Mar 23 18:55:37 localhost kernel: eth0: Setting half-duplex based on > auto-negoti > ated partner ability 0000. > Mar 23 18:55:31 localhost ifup: Determining IP information for eth0... > Mar 23 18:55:36 localhost network: Bringing up interface eth0: failed > Mar 23 19:07:39 localhost kernel: eth0: Setting half-duplex based on > auto-negoti > ated partner ability 0000. > Mar 23 20:24:17 localhost kernel: eth0: SMC1211TX EZCard 10/100 (RealTek > RTL8139 > ) at 0xc88a0000, 00:e0:29:95:97:85, IRQ 10 > Mar 23 20:24:17 localhost kernel: eth0: Setting half-duplex based on > auto-negoti > ated partner ability 0000. > Mar 23 20:24:10 localhost ifup: Determining IP information for eth0... > Mar 23 20:24:15 localhost network: Bringing up interface eth0: failed > Mar 23 20:29:43 localhost kernel: eth0: Setting half-duplex based on > auto-negoti > ated partner ability 0000. > Mar 23 20:31:19 localhost kernel: eth0: Setting half-duplex based on > auto-negoti > ated partner ability 0000. > Mar 23 20:34:12 localhost kernel: eth0: Setting half-duplex based on > auto-negoti > ated partner ability 0000. > Mar 24 08:08:13 localhost kernel: eth0: SMC1211TX EZCard 10/100 (RealTek > RTL8139 > ) at 0xc88a0000, 00:e0:29:95:97:85, IRQ 10 > Mar 24 08:08:13 localhost kernel: eth0: Setting half-duplex based on > auto-negoti > ated partner ability 0000. > Mar 24 08:08:07 localhost ifup: Determining IP information for eth0... > Mar 24 08:08:12 localhost network: Bringing up interface eth0: failed > Mar 24 15:40:11 localhost kernel: eth0: SMC1211TX EZCard 10/100 (RealTek > RTL8139 > ) at 0xc88a0000, 00:e0:29:95:97:85, IRQ 10 > Mar 24 15:40:11 localhost kernel: eth0: Setting half-duplex based on > auto-negoti > ated partner ability 0000. > Mar 24 15:40:05 localhost ifup: Determining IP information for eth0... > Mar 24 15:40:10 localhost network: Bringing up interface eth0: failed > Mar 24 18:46:57 localhost kernel: eth0: SMC1211TX EZCard 10/100 (RealTek > RTL8139 > ) at 0xc88a0000, 00:e0:29:95:97:85, IRQ 10 > Mar 24 18:46:57 localhost kernel: eth0: Setting half-duplex based on > auto-negoti > ated partner ability 0000. > Mar 24 18:46:51 localhost ifup: Determining IP information for eth0... > Mar 24 18:46:56 localhost network: Bringing up interface eth0: failed > Mar 24 18:52:52 localhost modprobe: modprobe: Can't locate module eth1 > Mar 24 18:54:17 localhost modprobe: modprobe: Can't locate module eth2 > Mar 24 18:54:24 localhost modprobe: modprobe: Can't locate module eth1 > Mar 24 18:54:24 localhost modprobe: modprobe: Can't locate module eth1 > Mar 24 18:54:24 localhost modprobe: modprobe: Can't locate module eth2 > Mar 24 18:54:24 localhost modprobe: modprobe: Can't locate module eth2 > Mar 24 18:54:24 localhost insmod: > /lib/modules/2.4.18-14/kernel/drivers/net/8139 > cp.o: insmod eth2 failed > Mar 24 18:54:25 localhost insmod: > /lib/modules/2.4.18-14/kernel/drivers/net/8139 > cp.o: insmod eth2 failed > Mar 24 18:55:14 localhost modprobe: modprobe: Can't locate module eth1 > Mar 24 18:55:14 localhost modprobe: modprobe: Can't locate module eth1 > Mar 24 18:55:14 localhost insmod: > /lib/modules/2.4.18-14/kernel/drivers/net/8139 > cp.o: insmod eth2 failed > Mar 24 18:55:14 localhost insmod: > /lib/modules/2.4.18-14/kernel/drivers/net/8139 > cp.o: insmod eth2 failed > Mar 24 18:55:48 localhost modprobe: modprobe: Can't locate module eth1 > Mar 24 18:55:48 localhost modprobe: modprobe: Can't locate module eth1 > Mar 24 18:55:48 localhost insmod: > /lib/modules/2.4.18-14/kernel/drivers/net/8139 > cp.o: insmod eth2 failed > Mar 24 18:55:48 localhost insmod: > /lib/modules/2.4.18-14/kernel/drivers/net/8139 > cp.o: insmod eth2 failed > Mar 24 18:56:54 localhost modprobe: modprobe: Can't locate module eth1 > Mar 24 18:56:54 localhost modprobe: modprobe: Can't locate module eth1 > Mar 24 18:56:55 localhost kernel: eth0: Setting half-duplex based on > auto-negoti > ated partner ability 0000. > Mar 24 18:57:20 localhost insmod: > /lib/modules/2.4.18-14/kernel/drivers/net/8139 > cp.o: insmod eth2 failed > Mar 24 18:57:20 localhost insmod: > /lib/modules/2.4.18-14/kernel/drivers/net/8139 > cp.o: insmod eth2 failed > Mar 26 15:55:26 localhost kernel: eth0: SMC1211TX EZCard 10/100 (RealTek > RTL8139 > ) at 0xc8a13000, 00:e0:29:95:97:85, IRQ 10 > Mar 26 15:55:27 localhost /etc/hotplug/net.agent: invoke ifup eth0 > Mar 26 15:55:49 localhost kernel: eth0: Setting half-duplex based on > auto-negoti > ated partner ability 0000. > Mar 26 16:03:31 localhost kernel: eth0: Setting half-duplex based on > auto-negoti > ated partner ability 0000. > Mar 27 07:56:42 localhost kernel: eth0: SMC1211TX EZCard 10/100 (RealTek > RTL8139 > ) at 0xc88a0000, 00:e0:29:95:97:85, IRQ 10 > Mar 27 07:56:42 localhost kernel: eth0: Setting half-duplex based on > auto-negoti > ated partner ability 0000. > Mar 27 07:56:36 localhost ifup: Determining IP information for eth0... > Mar 27 07:56:41 localhost network: Bringing up interface eth0: failed > Mar 27 08:01:08 localhost kernel: eth0: Setting half-duplex based on > auto-negoti > ated partner ability 0000. > [EMAIL PROTECTED] root]# > > > in network configuration, on the hardware tab, i click edit for the card, > and theres a whole bunch of blank stuff, like IRQ, memory, i/o... > should those be filled in? >
I don't think so since it is a PCI card. ISA yes but not PCI. The only thing I can think of is the PNP os installed setting in the bios used to screwup some pci cards. reboot and go though the bios settings and turn pnp os off. Other than that I give up. Bret -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
