Ok, How did evrybody get their palm to sync up via the USB port? I have not been able to do it. I know which port the cradle is connected too (got this from the /var/log/messages). I changed the rights on the device. Still no luck.
What am I missing? david On 8 Mar 2003, Joe Polk wrote: > You have to be sure you're using the right port. You can fool JPilot too > by simple creating a symlink to the USB device and calling it > /dev/pilot. Also, I found that I occassionally have to soft-reset my > Clie' to get it to sync. > > <<JAV>> > > On Sat, 2003-03-08 at 14:53, dbrett wrote: > > If you get this working let me know. I am in exactly the same boat as you. > > > > Things I know and suspect are the following: > > > > - if you look in the messages log you will see reference to the port when > > you connect to usb cradle. I tried setting the port to these and it still > > did not work. > > > > - I suspect, it may require a recompile of the kernel with some more > > options enables. I came across these by accident, when I was going > > through KDE configuration menus. I have no idea how to compile a kernel. > > the little I have read confused me, rather than helped. > > > > - I was using J-Pilot, for quit a while but have since I can't get it to > > sync throught the USB port. There is a link on the page which may help as > > well > > http://nick.kreucher.net/clie/#Setup > > > > - I have a usb mouse which works and usb to serial cable which works. But > > I cannot get the palm to sync up > > > > Please let me know if you get this working and what you did. I will do the > > same, if I suceed. > > > > david > > On 7 Mar 2003, Richard S. Crawford wrote: > > > > > I'm trying to get my new Palm m515 to talk to my Linux box. It's a USB > > > sync, so I know I ought to point /dev/pilot at one of my USB ports. > > > Trouble is, I have four such ports, and I don't know which one is > > > reflected by which device in my /dev directory. So I assume that I need > > > to point /dev/pilot at /dev/ttyUSB0 or ttyUSB1 or some such thing. > > > > > > My system already has a USB mouse which works perfectly; I assume that > > > it's talking to /dev/ttyUSB0 but I'm not sure. How do I find that out, > > > and how do I figure out which USB device I should point my /dev/pilot > > > symlink at? > > > > > > -- > > > Slainte, > > > Richard S. Crawford > > > AIM: Buffalo2K / Y!: rscrawford / ICQ: 11640404 > > > http://www.mossroot.com http://www.stonegoose.com > > > "It is only with our heart that we can see clearly. What is essential > > > is > > > invisible to the eye." --Antoine de Saint Exupery > > > > > > > > > > > > > > > > > > > > -- > > redhat-list mailing list > > unsubscribe mailto:[EMAIL PROTECTED] > > https://listman.redhat.com/mailman/listinfo/redhat-list > > > > > > -- > redhat-list mailing list > unsubscribe mailto:[EMAIL PROTECTED] > https://listman.redhat.com/mailman/listinfo/redhat-list > -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
