i've been trying to load usb-uhci on my dell poweredge 180 with an IO Gear USB card in a spare PCI slot. the module won't load and i'm unsure of what to do next. i've included the insmod messages as well as the demsg message below. any help is appreciated.
thanks
jay



[EMAIL PROTECTED] sbin]# /sbin/insmod usb-uhci
Using /lib/modules/2.4.18-14/kernel/drivers/usb/usb-uhci.o
/lib/modules/2.4.18-14/kernel/drivers/usb/usb-uhci.o: unresolved symbol 
usb_claim_bandwidth_R02d48366
/lib/modules/2.4.18-14/kernel/drivers/usb/usb-uhci.o: unresolved symbol 
usb_disconnect_Re906e30a
/lib/modules/2.4.18-14/kernel/drivers/usb/usb-uhci.o: unresolved symbol 
usb_alloc_dev_R23bde69d
/lib/modules/2.4.18-14/kernel/drivers/usb/usb-uhci.o: unresolved symbol 
usb_check_bandwidth_Raf7f43d1
/lib/modules/2.4.18-14/kernel/drivers/usb/usb-uhci.o: unresolved symbol 
usb_connect_R67bd2234
/lib/modules/2.4.18-14/kernel/drivers/usb/usb-uhci.o: unresolved symbol 
usb_deregister_bus_Rdb756ce8
/lib/modules/2.4.18-14/kernel/drivers/usb/usb-uhci.o: unresolved symbol 
usb_root_hub_string_Ra68718f0
/lib/modules/2.4.18-14/kernel/drivers/usb/usb-uhci.o: unresolved symbol 
usb_release_bandwidth_Rb4a01ae0
/lib/modules/2.4.18-14/kernel/drivers/usb/usb-uhci.o: unresolved symbol 
usb_inc_dev_use_R00a41ff1
/lib/modules/2.4.18-14/kernel/drivers/usb/usb-uhci.o: unresolved symbol 
usb_free_bus_Rb30f64d4
/lib/modules/2.4.18-14/kernel/drivers/usb/usb-uhci.o: unresolved symbol 
usb_new_device_R9f6eb179
/lib/modules/2.4.18-14/kernel/drivers/usb/usb-uhci.o: unresolved symbol 
usb_free_dev_R447e67de
/lib/modules/2.4.18-14/kernel/drivers/usb/usb-uhci.o: unresolved symbol 
usb_alloc_bus_Re9db6af6
/lib/modules/2.4.18-14/kernel/drivers/usb/usb-uhci.o: unresolved symbol 
usb_register_bus_R50eeec1c
[EMAIL PROTECTED] sbin]# /sbin/lsmod
Module                  Size  Used by    Not tainted
sr_mod                 18136   0  (autoclean)
cdrom                  33696   0  (autoclean) [sr_mod]
sonicvibes             27400   0  (autoclean)
gameport                3396   0  (autoclean) [sonicvibes]
soundcore               6532   4  (autoclean) [sonicvibes]
mousedev                5524   1  (autoclean)
input                   5888   0  (autoclean) [mousedev]
autofs                 13348   0  (autoclean) (unused)
tulip                  43552   1
ipt_REJECT              3736   2  (autoclean)
iptable_filter          2412   1  (autoclean)
ip_tables              14936   2  [ipt_REJECT iptable_filter]
microcode               4668   0  (autoclean)
ext3                   70368   5
jbd                    52212   5  [ext3]
aic7xxx               137140   6
sd_mod                 13552  12
scsi_mod              107144   3  [sr_mod aic7xxx sd_mod]
[EMAIL PROTECTED] sbin]#
[EMAIL PROTECTED] sbin]# /sbin/modprobe usb-uhci
/lib/modules/2.4.18-14/kernel/drivers/usb/usb-uhci.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO 
or IRQ parameters.
      You may find more information in syslog or the output from dmesg
/lib/modules/2.4.18-14/kernel/drivers/usb/usb-uhci.o: insmod 
/lib/modules/2.4.18-14/kernel/drivers/usb/usb-uhci.o failed
/lib/modules/2.4.18-14/kernel/drivers/usb/usb-uhci.o: insmod usb-uhci failed
[EMAIL PROTECTED] sbin]# dmesg
Linux version 2.4.18-14 ([EMAIL PROTECTED]) (gcc version 3.2 20020903 (Red Hat Linux 
8.0 3.2-7)) #1 Wed Sep 4 13:35:50 EDT 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000014000000 (usable)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
320MB LOWMEM available.
On node 0 totalpages: 81920
zone(0): 4096 pages.
zone(1): 77824 pages.
zone(2): 0 pages.
Kernel command line: ro root=LABEL=/
Initializing CPU#0
Detected 179.639 MHz processor.
Speakup v-1.00 CVS: Tue Jun 11 14:22:53 EDT 2002 : initialized
Console: colour VGA+ 80x25
Calibrating delay loop... 355.70 BogoMIPS
Memory: 317436k/327680k available (1326k kernel code, 7680k reserved, 999k data, 212k 
init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 8192 (order: 4, 65536 bytes)
ramfs: mounted with options: <defaults>
ramfs: max_pages=39951 max_file_pages=0 max_inodes=0 max_dentries=39951
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0000f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 8K, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 0000f9ff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0000f9ff 00000000 00000000 00000000
CPU:             Common caps: 0000f9ff 00000000 00000000 00000000
CPU: Intel Pentium Pro stepping 07
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf88d7, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
speakup:  initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ 
SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
oprofile: mapping APIC.
oprofile: enabled local APIC. Err code 00000000
oprofile 0.2 loaded, major 254
block: 608 slots per queue, batch=152
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide-floppy driver 0.99.newide
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 252k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
        <Adaptec aic7880 Ultra SCSI adapter>
        aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs

blk: queue c1d29214, I/O limit 4095Mb (mask 0xffffffff)
  Vendor: SEAGATE   Model: ST15150W          Rev: 0023
  Type:   Direct-Access                      ANSI SCSI revision: 02
blk: queue c1d29414, I/O limit 4095Mb (mask 0xffffffff)
  Vendor: WDIGTL    Model: WDE18300 ULTRA2   Rev: 1.30
  Type:   Direct-Access                      ANSI SCSI revision: 02
blk: queue c1d29c14, I/O limit 4095Mb (mask 0xffffffff)
  Vendor: NEC       Model: CD-ROM DRIVE:462  Rev: 1.14
  Type:   CD-ROM                             ANSI SCSI revision: 02
blk: queue c1569214, I/O limit 4095Mb (mask 0xffffffff)
scsi0:A:0:0: Tagged Queuing enabled.  Depth 253
scsi0:A:3:0: Tagged Queuing enabled.  Depth 253
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi disk sdb at scsi0, channel 0, id 3, lun 0
(scsi0:A:0): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
SCSI device sda: 8388315 512-byte hdwr sectors (4295 MB)
Partition check:
 sda: sda1
(scsi0:A:3): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
SCSI device sdb: 35761710 512-byte hdwr sectors (18310 MB)
 sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 212k freed
EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,19), internal journal
Adding Swap: 650592k swap-space (priority -1)
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,18), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,17), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,21), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
IA-32 Microcode Update Driver: v1.11 <[EMAIL PROTECTED]>
microcode: CPU0 updated from revision 197 to 198, date=12101996
microcode: freed 2048 bytes
parport0: PC-style at 0x378 [PCSPP]
ohci1394: pci_module_init failed
ip_tables: (C) 2000-2002 Netfilter core team
Linux Tulip driver version 0.9.15-pre11 (May 11, 2002)
divert: allocating divert_blk for eth0
eth0: ADMtek Comet rev 17 at 0xd48ecc00, 00:04:5A:6C:1A:C6, IRQ 11.
mice: PS/2 mouse device common for all mice
sv: version v0.30 time 13:45:09 Sep  4 2002
sv: io ports: 0xf0e0 0xf0f0 0xf0c8 0xf0cc 0xf0d0 0x1000 0x1010
sv: found adapter at io 0xf0f0 irq 9 dmaa 0x1000 dmac 0x1010 revision 3
sv: DMA buffer crosses 64k boundary: busaddr 0x6e0000  size 131072
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 5, lun 0
(scsi0:A:5): 10.000MB/s transfers (10.000MHz, offset 15)
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.12
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 13:44:31 Sep  4 2002
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub

Reply via email to