-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
18000 collisions is high if there's only one or two machines on the
internal net, but if you have more than that, & they're all active,
then it is not all that many... I find it hard to believe that a bad
card would only manifest itself as collisions...
- -----Original Message-----
From: manjunath [mailto:[EMAIL PROTECTED]]
Sent: Friday, February 07, 2003 5:33 AM
To: [EMAIL PROTECTED]
Subject: Re: Can't ping myself.
As you see , 192.168.0.1 Card has lot of collisions on its interface
.. What i suggest is, takeout this card, switch on the box. Kudzu
will ask you to remove it, hence remove the card. Power off, and
insert the card again, and configure the card once again. If the
problem continues, you got to replace this card..
BTB when you are pinging is it saying " Destination host unreachable
" bla bla ,,
Thanx 'n Regards
Manjunth Hegde
- ----- Original Message -----
From: Rai Ou
To: '[EMAIL PROTECTED]'
Sent: Friday, February 07, 2003 3:21 PM
Subject: RE: Can't ping myself.
The output is :
eth0 Link encap:Ethernet HWaddr 00:90:CC:08:3F:9E
inet addr:219.105.101.197 Bcast:255.255.255.255
Mask:255.255.255.0
UP BROADCAST NOTRAILERS RUNNING MTU:1500 Metric:1
RX packets:1304172 errors:0 dropped:0 overruns:0 frame:0
TX packets:536135 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
Interrupt:5 Base address:0xe400
eth1 Link encap:Ethernet HWaddr 00:90:CC:41:59:13
inet addr:192.168.0.1 Bcast:192.168.0.255
Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:356003 errors:0 dropped:0 overruns:0 frame:0
TX packets:479576 errors:0 dropped:0 overruns:0 carrier:0
collisions:18801 txqueuelen:100
Interrupt:10 Base address:0x1000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:55221 errors:0 dropped:0 overruns:0 frame:0
TX packets:55221 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
Lei
- -----Original Message-----
From: manjunath [mailto:[EMAIL PROTECTED]]
Sent: Friday, February 07, 2003 3:22 PM
To: [EMAIL PROTECTED]
Subject: Re: Can't ping myself.
What is the output of /sbin/ifconfig .. Check whether eth0 is
up/down ..
Manjunth Hegde
- ----- Original Message -----
From: Rai Ou
To: '[EMAIL PROTECTED]'
Sent: Friday, February 07, 2003 11:31 AM
Subject: Can't ping myself.
My Linux box can't get ping response when pinging itself like below:
ping localhost
ping 127.0.0.1
ping xxx.xxx.xxx.xxx (it is the Global ip get from my cable modem)
I post my /etc/hosts file here:
- --------------------------------
127.0.0.1 localhost.localdomain localhost
- --------------------------------
and the /etc/sysconfig/network file is here:
- --------------------------------
NETWORKING=yes
HOSTNAME="localhost.localdomain"
- --------------------------------
Waiting the suggestions.
Lei
-----BEGIN PGP SIGNATURE-----
Version: PGP Personal Privacy 6.5.3
iQA/AwUBPkO1atPjBkUEZx5AEQJtJACfZKq6uK41pYwn0PV/oyGkOUQhDoEAn0d0
pxuUoudg6YjJMF8qY/ZKGxqe
=EMcO
-----END PGP SIGNATURE-----
