Hello, I am trying to back something up to my cd-rw and keep getting errors.
I tried both via cd-roast and making a iso via the commmand line and writing via cdrecord (as suggested in the RedHat getting started guide). I dk if it makes a diff, but I originally had written a different iso under windows to the disk and then erased it succussfully under linux. Anyway, if the following makes any sence and indicated my problem, I greatly appreciate letting me know. Shawn $ su root -c "cdrecord -v -eject speed=4 dev=1,0,0 webapps.iso" Password: Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J?rg Schilling TOC Type: 1 = CD-ROM scsidev: '1,0,0' scsibus: 1 target: 0 lun: 0 Linux sg driver version: 3.1.24 Using libscg version 'schily-0.5' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'SONY ' Identifikation : 'CD-RW CRX140E ' Revision : '1.0n' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Drive buf size : 4183808 = 4085 KB FIFO size : 4194304 = 4096 KB Track 01: data 22 MB Total size: 25 MB (02:31.28) = 11346 sectors Lout start: 25 MB (02:33/21) = 11346 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Reference speed: 2 Is not unrestricted Is erasable ATIP start of lead in: -11615 (97:27/10) ATIP start of lead out: 335925 (74:41/00) speed low: 0 speed high: 4 power mult factor: 4 5 recommended erase/write power: 3 A2 values: 5C C6 26 Disk type: Phase change Manuf. index: 18 Manufacturer: Plasmon Data systems Ltd. Trying to clear drive status. cdrecord: Drive needs to reload the media to return to proper status. Blocks total: 335925 Blocks current: 335925 Blocks remaining: 324579 Starting to write CD/DVD at speed 4 in write mode for single session. Last chance to quit, starting real write in 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... cdrecord: Input/output error. read track info: scsi sendcmd: no error CDB: 52 01 00 00 00 FF 00 00 1C 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 C0 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 Sense flags: Blk 0 (not valid) error refers to command part, bit ptr 0 (not valid) field ptr 0 cmd finished after 0.001s timeout 240s Writing time: 0.024s Fixating... cdrecord: Input/output error. close track/session: scsi sendcmd: no error CDB: 5B 00 02 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.019s timeout 480s cmd finished after 0.019s timeout 480s Fixating time: 0.021s cdrecord: fifo had 64 puts and 0 gets. cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. -- shawn <[EMAIL PROTECTED]> -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe https://listman.redhat.com/mailman/listinfo/redhat-list
