richard <[EMAIL PROTECTED]> writes:
> BRU was working wonderfully for months. Now any bru command
> I issue returns:
>
> bru: [E134] internal error 100 - failed self consistency and portability checks
>
> I have this problem on both of my Linux boxes. Any suggestions
> on getting bru working again???
Your clocks have probably changed. I posted this to someone else. See
if it works for you.
Note: This person was in Amsterdam.
####################################################################
The simple solution is step 12) below. However you should read the
message below and follow the part that applies to you.
All timezone changes are made using timeconfig.
I)
If you are _not_ already using glibc-2.0.7-5 from the Red Hat updates
directory:
1) Make sure your Hardware clock is set to GMT.
2) Make sure the "Hardware clock set to GMT" option is checked.
3) Ensure that the Europe/Amsterdam (or CET) timezone is selected
4) Upgrade to glibc-2.0.7-5 from the Red Hat updates directory
5) Try Bru
6) If it doesn't work try swapping the timezone to CET (or
Europe/Amsterdam)
7) Try Bru
8) If it doesn't work goto step 12) in part II
II)
If you are already using glibc-2.0.7-5 from the Red Hat updates
directory _or_ if you don't want to change your glibc:
9) Make sure your Hardware clock is set to GMT.
10) Make sure the "Hardware clock set to GMT" option is checked.
11) Do steps 3) and 5) and if necessary steps 6) and 7) in part I.
12) If it still doesn't work change your timezone to Etc/GMT+2
(assuming that you are now 2hrs ahead of GMT)
--
Eze Ogwuma
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
