Thanks for the thoughts... I'll investigate..
I have run memtest and MemoryDoc (or is it DocMemory??) the memtest86 did appear to report a problem in the test #6, I then called Crucial and they ask me to run the DocMemory tester.. The quick test passed, I'm running the "BurnIn" all night tonight..
I'll beat on this some more in the morning...<G>
John...
fred smith wrote:
I've got a pair of VA503+ boards here, which also allow both SIMMS and
DIMMS. Only once have I attempted to use 72 pin SIMMS in either board,
and that attempt did not meet with success. It MAY be that I needed to
enter the SETUP util and change the RAM timings to be something suitable
for that form of RAM, but somehow I had the idea that the board would
take care of that for me. After a little bit of time fooling with it
I put the PC100 DIMM back in it and gave up. One question, of course,
is how similar is a 503+ to a 502.
Does anything else boot on it? have you tried DOS/Windoze? How
about MEMTEST86 ? (free from www.memtest86.com) Checked the FIC web
site for a FAQ or troubleshooting info?
-- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe https://listman.redhat.com/mailman/listinfo/redhat-list
