On Tue, 5 May 1998, Geoffrey Hunsicker wrote:
> Hi all,
>
> I've not gotten any responses to the following. Does anyone have any
> pointers to information which might be useful? I've checked all of the
> usual sources and found nothing.
No real advice except: check the SCSI ID on the tape drive (is it being
detected by the OS at bootup?), check the termination (do you have a
terminator installed on the end of this external SCSI bus?), check to see
whether you've used too many connectors on the SCSI card (remember that
you can use only TWO of the connectors on the SCSI card -- SCSI is a bus,
not a tree). Sorry I couldn't help you more.
Eric Lee Green [EMAIL PROTECTED] Executive Consultants
Systems Specialist Educational Administration Solutions
Louisiana Residents: Important: See http://members.tripod.com/~latrails
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
