Hi...
I got a big problem...or maybe small.
Anyways:
The problem: I can not connect to the net...
My equipment and what I've tried: I got a 3Com 3c509b (194.105.242.1)
ethernet adapter. It is connected to a cisco 160x router(.254), which in
turn is connected to a leased line. I'm 99% sure that the router and modem
are correctly set up (Set up by a professional). I also am almost sure
that the 3com card works correctly so the problem lies in software. I have
tried almost every setup in netcfg and then I started doing route and
ifconfig manually, that hasn't helped and I'm pretty desperate. I've done
everyting in the Howto....
When I do route -n it gives me:
Kernel routing table
Destination Gateway Genmask Flags MSS Window Use Iface
194.105.242.0 194.105.242.245 255.255.255.0 UGH 1500 0 0 eth
127.0.0.1 * 255.0.0.0 U 3584 0 2 lo
0.0.0.0 194.105.242.245 0.0.0.0 UG 1500 0 14 eth0
I have done 'route add default gw 194.105.242.254 eth0'
In netcfg the default gateway is set to 194.105.242.254 and the interface
to eth0
Do you have any ideas. My main concern is about the 0.0.0.0 s there,
shouldn't it say something else? can ANYONE help, please!:)
Jens
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
