Hi all,
I just installed RedHat 5.0 on my generic laptop and everything went fine
(almost). I have 2 PCMCIA slots: 1 is pcmcia Ethernet card and second
is a 33.6 PCMCIA modem card.
Linux booted up just fine, found the network and modem card
and loaded the proper modules. I was able to connect to the
net via 10-baseT. When I tried to test the modem using
"minicom -s" (or cu -l /dev/modem), I was able to type "AT", but the "OK"
prompt came back only after I kept hitting "return" and I got one
character back per "return". I got the dial tone fine but only
if I kept hitting "RETURN" key.
I have checked all I can: no interrupt conflict, no port
overlap, etc...
"cardctl config" shown the right configuration
and /dev/modem points to /dev/cua0 (I disabled my external COM 1
port on the back) and "setserial -a /dev/modem" shown everything was fine
(115000 baud_base, spd_vhi etc...)
I have also installed the latest pcmcia-cs (3.1) and the same
modem problem persisted.
I would appreciate **ANY** comment/suggestion/help. Thanks a lot.
- Minh -
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
