>I just set up a machine with RH5 on a network with other non RH Linux *nix >machines. All the *nix machines access a JetDirect lpd queue hooked to an >HP5SI. I used the install programs printer config stuff for an lpd queue, >and printing to the 5SI worked fine, except that it grabs paper from the >11x17 tray! It actually prints an 8.5x11 area on the 11x17 paper that it >grabs so it seems that it is set up properly for letter sized paper it's >just that its somehow commanding the 5SI to load from the wrong tray. > >Other *nix clients on the network don't have this problem. Anybody seen >this situation on this or any other multi-tray printers? > >Matt Porter Phoenix OpenSource Solutions Maybe the printer is set to 11x17 as the default and Linux output isn't requesting any kind of tray. See what the printer is set for as far as tray usage is concerned and go from there. MB -- System Administrator - Finnigan FT/MS - Madison WI. URL:http://www.ftms.com/ e-mail: [EMAIL PROTECTED] [Oooohhh, I need a hug] phone: (608) 273-8262 ext: 612 fax: (608) 273-8719 Visit - URL:http://www.vidiot.com/ (Your link to Star Trek and UPN) -- PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES! http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe" as the Subject.
