Thanks Eric for your pointer. However I just altered the argument of
load() function a little bit to get that loaded. Below is the line
what I tried.
ubuntu@ip-172-31-23-148:~$ R
R version 3.4.2 (2017-09-28) -- "Short Summer"
Copyright (C) 2017 The R Foundation for Statistical Computing
Platform: x86_64-pc-linux-gnu (64-bit)
R is free software and comes with ABSOLUTELY NO WARRANTY.
You are welcome to redistribute it under certain conditions.
Type 'license()' or 'licence()' for distribution details.
Natural language support but running in an English locale
R is a collaborative project with many contributors.
Type 'contributors()' for more information and
'citation()' on how to cite R or R packages in publications.
Type 'demo()' for some demos, 'help()' for on-line help, or
'help.start()' for an HTML browser interface to help.
Type 'q()' to quit R.
During startup - Warning message:
Setting LC_CTYPE failed, using "C"
> load("/home/ubuntu/Dat.RData")
>
However it still failing when I try that within my shiny app in AWS.
Below are my ui.R and server.R files respectively.
library(shiny)
# Define UI for miles per gallon application
fluidPage(
fluidRow(
column(12,
tableOutput('table')
)
)
)
server.R :
library(shiny)
load("/home/ubuntu/Dat.RData")
shinyServer(function(input, output) {
output$table = renderTable(head(data.frame(1:20, 1:20), 20))
})
with above setup when I deploy my shiny app I get below error :
18.221.184.94:3838 says
The application unexpectedly exited
Diagnostic information has been dumped to the JavaScript error console.
appreciate any help to get rid of this error.
Thanks for your time.
On Sun, Oct 8, 2017 at 12:39 AM, Eric Berger <ericjber...@gmail.com> wrote:
> Hi Christofer,
> The directory /srv/shiny-server would normally be owned by the root user.
> Your options would seem to be to either (1) bring up the R session as root
> (dangerous)
> or (2) try copying the file to your local directory and read it from there
> (if allowed).
> e.g. from the Unix shell:
>> cd ~ (i.e. cd to your home directory)
>> cp /srv/shiny-server/Dat.Rdata . (Note the '.' at the end. This may not
>> work - if not then you can try the following
>> sudo cp /srv/shiny-server/Dat.Rdata . (if you have sudo privileges - only
>> do this if the former command did not work)
>> chmod 777 Dat.Rdata (a bit of overkill - again preface by sudo if it does
>> not work without it)
>
> Then in your R session you can do the load from the file in this location.
> R> load("~/Dat.Rdata")
>
> HTH,
> Eric
>
>
> On Sat, Oct 7, 2017 at 8:54 PM, Christofer Bogaso
> <bogaso.christo...@gmail.com> wrote:
>>
>> Hi again,
>>
>> I hope this is the right place to post my question on running R within
>> Ubuntu, however if not, any pointer on right distribution list will be
>> helpful.
>>
>> I am currently using R in Ubuntu which is hosted in Amazon - AWS.
>>
>> I have a .Rdata file in AWS which I am trying to load in R. Used
>> following code, however, fails to load showing some permission issue.
>> However that same .Rdata file is getting loaded perfectly when I try
>> in my regular iOS.
>>
>> Below is my code and corresponding result :
>>
>> ubuntu@ip-172-31-23-148:~$ R
>>
>>
>> R version 3.4.2 (2017-09-28) -- "Short Summer"
>>
>> Copyright (C) 2017 The R Foundation for Statistical Computing
>>
>> Platform: x86_64-pc-linux-gnu (64-bit)
>>
>>
>> R is free software and comes with ABSOLUTELY NO WARRANTY.
>>
>> You are welcome to redistribute it under certain conditions.
>>
>> Type 'license()' or 'licence()' for distribution details.
>>
>>
>> Natural language support but running in an English locale
>>
>>
>> R is a collaborative project with many contributors.
>>
>> Type 'contributors()' for more information and
>>
>> 'citation()' on how to cite R or R packages in publications.
>>
>>
>> Type 'demo()' for some demos, 'help()' for on-line help, or
>>
>> 'help.start()' for an HTML browser interface to help.
>>
>> Type 'q()' to quit R.
>>
>>
>> During startup - Warning message:
>>
>> Setting LC_CTYPE failed, using "C"
>>
>> > file.exists('/srv/shiny-server/Dat.Rdata')
>>
>> [1] TRUE
>>
>> > load('/srv/shiny-server/Dat.Rdata')
>>
>> Error in readChar(con, 5L, useBytes = TRUE) : cannot open the connection
>>
>> In addition: Warning message:
>>
>> In readChar(con, 5L, useBytes = TRUE) :
>>
>> cannot open compressed file '/srv/shiny-server/Dat.Rdata', probable
>> reason 'Permission denied'
>>
>> > readRDS('/srv/shiny-server/Dat.Rdata')
>>
>> Error in gzfile(file, "rb") : cannot open the connection
>>
>> In addition: Warning message:
>>
>> In gzfile(file, "rb") :
>>
>> cannot open compressed file '/srv/shiny-server/Dat.Rdata', probable
>> reason 'Permission denied'
>>
>>
>> Can someone help me to understand where it went wrong with Ubuntu? I
>> also tried with changing the extension from .Rdata to .RData, however
>> observing the same error.
>>
>> Any pointer will be highly appreciated.
>>
>> Thanks for your time.
>>
>> ______________________________________________
>> R-help@r-project.org mailing list -- To UNSUBSCRIBE and more, see
>> https://stat.ethz.ch/mailman/listinfo/r-help
>> PLEASE do read the posting guide
>> http://www.R-project.org/posting-guide.html
>> and provide commented, minimal, self-contained, reproducible code.
>
>
______________________________________________
R-help@r-project.org mailing list -- To UNSUBSCRIBE and more, see
https://stat.ethz.ch/mailman/listinfo/r-help
PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
and provide commented, minimal, self-contained, reproducible code.
