Hi Greg,
Okay, I have a better idea now of what you want. The problem of
multiple matches is still there, but here is a start:
# this data frame actually contains all the values in ref in the "reg" field
map<-read.table(text="reg p rate
10276 0.700 3.867e-18
71608 0.830 4.542e-16
29220 0.430 1.948e-15
99542 0.220 1.084e-15
26441 0.880 9.675e-14
95082 0.090 7.349e-13
36169 0.480 9.715e-13
55572 0.500 9.071e-12
65255 0.300 1.688e-11
51960 0.970 1.163e-10
55652 0.388 3.750e-10
63933 0.250 9.128e-10
35170 0.720 7.355e-09
06491 0.370 1.634e-08
85508 0.470 1.057e-07
86666 0.580 7.862e-07
04758 0.810 9.501e-07
06169 0.440 1.104e-06
63933 0.750 2.624e-06
41838 0.960 8.119e-06
74806 0.810 9.501e-07
92643 0.470 1.057e-07
73732 0.090 7.349e-13
82451 0.960 8.119e-06
86042 0.480 9.715e-13
93502 0.500 9.071e-12
85508 0.370 1.634e-08
95082 0.830 4.542e-16",
header=TRUE)
# same as in your example
ref<-read.table(text="reg1 reg2
29220 63933
26441 41838
06169 10276
74806 92643
73732 82451
86042 93502
85508 95082",
header=TRUE)
# sort the "map" data frame
map2<-map[order(map$reg),]
# get a field for the counts
ref$n<-NA
# and a field for the minimum p values
ref$min_p<-NA
# get the number of rows in "ref"
nref<-dim(ref)[1]
for(i in 1:nref) {
start<-which(map2$reg==ref$reg1[i])
end<-which(map2$reg==ref$reg2[i])
cat("start",start,"end",end,"\n")
# get the range of matches
regrange<-range(c(start,end))
# convert this to a sequence spanning all matches
allreg<-regrange[1]:regrange[2]
ref$n[i]<-sum(map2$p[allreg] > 0.85)
ref$min_p[i]<-min(map2$p[allreg])
}
This example uses the span from the first match of "reg1" to the last
match of "reg2". This may not be what you want, so let me know if
there are further constraints.
Jim
On Mon, Jun 13, 2016 at 12:35 PM, greg holly <mak.hho...@gmail.com> wrote:
> Hi Bert;
>
> I do appreciate for this. I need check your codes on task2 tomorrow at my
> office on the real data as I have difficulty (because a technical issue) to
> remote connection. I am sure it will work well.
>
> I am sorry that I was not able to explain my first question. Basically
>
> Values in ref data represent the region of chromosome. I need choose these
> regions in map (all regions values in ref data are exist in map data in the
> first column -column map$reg). And then summing up the column "map$rate and
> count the numbers that gives >0.85. For example, consider the first row in
> data ref. They are 29220 and 63933. After sorting the first column in
> map then summing column "map$rate" only between 29220 to 63933 in sorted
> map and cut off at >0.85. Then count how many rows in sorted map gives
>>0.85. For example consider there are 38 rows between 29220 in 63933 in
>>sorted
> map$reg and only summing first 12 of them gives>0.85. Then my answer is
> going to be 12 for 29220 - 63933 in ref.
>
> Thanks I lot for your patience.
>
> Cheers,
> Greg
>
> On Sun, Jun 12, 2016 at 10:35 PM, greg holly <mak.hho...@gmail.com> wrote:
>
>> Hi Bert;
>>
>> I do appreciate for this. I need check your codes on task2 tomorrow at my
>> office on the real data as I have difficulty (because a technical issue) to
>> remote connection. I am sure it will work well.
>>
>> I am sorry that I was not able to explain my first question. Basically
>>
>> Values in ref data represent the region of chromosome. I need choose these
>> regions in map (all regions values in ref data are exist in map data in the
>> first column -column map$reg). And then summing up the column "map$rate and
>> count the numbers that gives >0.85. For example, consider the first row in
>> data ref. They are 29220 and 63933. After sorting the first column in
>> map then summing column "map$rate" only between 29220 to 63933 in
>> sorted map and cut off at >0.85. Then count how many rows in sorted map
>> gives >0.85. For example consider there are 38 rows between 29220 in
>> 63933 in sorted map$reg and only summing first 12 of them gives>0.85.
>> Then my answer is going to be 12 for 29220 - 63933 in ref.
>>
>> Thanks I lot for your patience.
>>
>> Cheers,
>> Greg
>>
>> On Sun, Jun 12, 2016 at 6:36 PM, Bert Gunter <bgunter.4...@gmail.com>
>> wrote:
>>
>>> Greg:
>>>
>>> I was not able to understand your task 1. Perhaps others can.
>>>
>>> My understanding of your task 2 is that for each row of ref, you wish
>>> to find all rows,of map such that the reg values in those rows fall
>>> between the reg1 and reg2 values in ref (inclusive change <= to < if
>>> you don't want the endpoints), and then you want the minimum map$p
>>> values of all those rows. If that is correct, I believe this will do
>>> it (but caution, untested, as you failed to provide data in a
>>> convenient form, e.g. using dput() )
>>>
>>> task2 <- with(map,vapply(seq_len(nrow(ref)),function(i)
>>> min(p[ref[i,1]<=reg & reg <= ref[i,2] ]),0))
>>>
>>>
>>> If my understanding is incorrect, please ignore both the above and the
>>> following:
>>>
>>>
>>> The "solution" I have given above seems inefficient, so others may be
>>> able to significantly improve it if you find that it takes too long.
>>> OTOH, my understanding of your specification is that you need to
>>> search for all rows in map data frame that meet the criterion for each
>>> row of ref, and without further information, I don't know how to do
>>> this without just repeating the search 560 times.
>>>
>>>
>>> Cheers,
>>> Bert
>>>
>>>
>>> Bert Gunter
>>>
>>> "The trouble with having an open mind is that people keep coming along
>>> and sticking things into it."
>>> -- Opus (aka Berkeley Breathed in his "Bloom County" comic strip )
>>>
>>>
>>> On Sun, Jun 12, 2016 at 1:14 PM, greg holly <mak.hho...@gmail.com> wrote:
>>> > Dear all;
>>> >
>>> >
>>> >
>>> > I have two data sets, data=map and data=ref). A small part of each data
>>> set
>>> > are given below. Data map has more than 27 million and data ref has
>>> about
>>> > 560 rows. Basically I need run two different task. My R codes for these
>>> > task are given below but they do not work properly.
>>> >
>>> > I sincerely do appreciate your helps.
>>> >
>>> >
>>> > Regards,
>>> >
>>> > Greg
>>> >
>>> >
>>> >
>>> > Task 1)
>>> >
>>> > For example, the first and second columns for row 1 in data ref are
>>> 29220
>>> > 63933. So I need write an R code normally first look the first row in
>>> ref
>>> > (which they are 29220 and 63933) than summing the column of "map$rate"
>>> and
>>> > give the number of rows that >0.85. Then do the same for the second,
>>> > third....in ref. At the end I would like a table gave below (the
>>> results I
>>> > need). Please notice the all value specified in ref data file are exist
>>> in
>>> > map$reg column.
>>> >
>>> >
>>> >
>>> > Task2)
>>> >
>>> > Again example, the first and second columns for row 1 in data ref are
>>> 29220
>>> > 63933. So I need write an R code give the minimum map$p for the 29220
>>> > -63933 intervals in map file. Than
>>> >
>>> > do the same for the second, third....in ref.
>>> >
>>> >
>>> >
>>> >
>>> > #my attempt for the first question
>>> >
>>> > temp<-map[order(map$reg, map$p),]
>>> >
>>> > count<-1
>>> >
>>> > temp<-unique(temp$reg
>>> >
>>> > for(i in 1:length(ref) {
>>> >
>>> > for(j in 1:length(ref)
>>> >
>>> > {
>>> >
>>> > temp1<-if (temp[pos[i]==ref[ref$reg1,] & (temp[pos[j]==ref[ref$reg2,]
>>> > & temp[cumsum(temp$rate)
>>> >>0.70,])
>>> >
>>> > count=count+1
>>> >
>>> > }
>>> >
>>> > }
>>> >
>>> > #my attempt for the second question
>>> >
>>> >
>>> >
>>> > temp<-map[order(map$reg, map$p),]
>>> >
>>> > count<-1
>>> >
>>> > temp<-unique(temp$reg
>>> >
>>> > for(i in 1:length(ref) {
>>> >
>>> > for(j in 1:length(ref)
>>> >
>>> > {
>>> >
>>> > temp2<-if (temp[pos[i]==ref[ref$reg1,] & (temp[pos[j]==ref[ref$reg2,])
>>> >
>>> > output<-temp2[temp2$p==min(temp2$p),]
>>> >
>>> > }
>>> >
>>> > }
>>> >
>>> >
>>> >
>>> > Data sets
>>> >
>>> >
>>> > Data= map
>>> >
>>> > reg p rate
>>> >
>>> > 10276 0.700 3.867e-18
>>> >
>>> > 71608 0.830 4.542e-16
>>> >
>>> > 29220 0.430 1.948e-15
>>> >
>>> > 99542 0.220 1.084e-15
>>> >
>>> > 26441 0.880 9.675e-14
>>> >
>>> > 95082 0.090 7.349e-13
>>> >
>>> > 36169 0.480 9.715e-13
>>> >
>>> > 55572 0.500 9.071e-12
>>> >
>>> > 65255 0.300 1.688e-11
>>> >
>>> > 51960 0.970 1.163e-10
>>> >
>>> > 55652 0.388 3.750e-10
>>> >
>>> > 63933 0.250 9.128e-10
>>> >
>>> > 35170 0.720 7.355e-09
>>> >
>>> > 06491 0.370 1.634e-08
>>> >
>>> > 85508 0.470 1.057e-07
>>> >
>>> > 86666 0.580 7.862e-07
>>> >
>>> > 04758 0.810 9.501e-07
>>> >
>>> > 06169 0.440 1.104e-06
>>> >
>>> > 63933 0.750 2.624e-06
>>> >
>>> > 41838 0.960 8.119e-06
>>> >
>>> >
>>> > data=ref
>>> >
>>> > reg1 reg2
>>> >
>>> > 29220 63933
>>> >
>>> > 26441 41838
>>> >
>>> > 06169 10276
>>> >
>>> > 74806 92643
>>> >
>>> > 73732 82451
>>> >
>>> > 86042 93502
>>> >
>>> > 85508 95082
>>> >
>>> >
>>> >
>>> > the results I need
>>> >
>>> > reg1 reg2 n
>>> >
>>> > 29220 63933 12
>>> >
>>> > 26441 41838 78
>>> >
>>> > 06169 10276 125
>>> >
>>> > 74806 92643 11
>>> >
>>> > 73732 82451 47
>>> >
>>> > 86042 93502 98
>>> >
>>> > 85508 95082 219
>>> >
>>> > [[alternative HTML version deleted]]
>>> >
>>> > ______________________________________________
>>> > R-help@r-project.org mailing list -- To UNSUBSCRIBE and more, see
>>> > https://stat.ethz.ch/mailman/listinfo/r-help
>>> > PLEASE do read the posting guide
>>> http://www.R-project.org/posting-guide.html
>>> > and provide commented, minimal, self-contained, reproducible code.
>>>
>>
>>
>
> [[alternative HTML version deleted]]
>
> ______________________________________________
> R-help@r-project.org mailing list -- To UNSUBSCRIBE and more, see
> https://stat.ethz.ch/mailman/listinfo/r-help
> PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
> and provide commented, minimal, self-contained, reproducible code.
______________________________________________
R-help@r-project.org mailing list -- To UNSUBSCRIBE and more, see
https://stat.ethz.ch/mailman/listinfo/r-help
PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
and provide commented, minimal, self-contained, reproducible code.
