Very close! The header now looks like this: c("10", "11", "1_", "HuEx", "1_0",
"st", "v2", "", "CEL")
For some reason, it's not concatenating.
Best,
Christian T. Stackhouse | Graduate Student
GBS Neuroscience Theme
Department of Neurosurgery
Department of Radiation Oncology
UAB | The University of Alabama at Birmingham
Hazelrig-Salter Radiation Oncology Center | 1700 6th Ave S | Birmingham, AL
35233
M: 919.724.6890 | ctsta...@uab.edu | cstackho...@uabmc.edu | ctsta...@gmail.com
uab.edu
Knowledge that will change your world
________________________________________
From: Jim Lemon <drjimle...@gmail.com>
Sent: Tuesday, March 22, 2016 6:02 PM
To: Christian T Stackhouse (Campus)
Cc: r-help@r-project.org
Subject: Re: [R] Help batch saving elements of a list into unique files
I think it's the "unlist". I can only test this with one set of made
up names at a time.
names(out[[affdf]])<-
lapply(strsplit(names(out[[affdf]]),"[.]"),drop_token1)
Jim
On Wed, Mar 23, 2016 at 9:57 AM, Christian T Stackhouse (Campus)
<ctsta...@uab.edu> wrote:
> This is what I ran:
>
>> drop_token1<-function(x) {
> + return(paste(x[2:length(x)],sep="."))
> + }
>> for(affdf in 1:length(out)) {
> +
> names(out[[affdf]])<-lapply(unlist(strsplit(names(out[[affdf]]),"[.]")),drop_token1)
> + write.csv(out[[affdf]],file=paste("affymetrix",affdf,".txt",sep=""))
> + }
> Error in names(out[[affdf]]) <- lapply(unlist(strsplit(names(out[[affdf]]), :
> 'names' attribute [1148] must be the same length as the vector [118]
>>
>
> This is what the header was before:
>
> X0.Classical.10.11.1_.HuEx.1_0.st.v2..CEL
>
> There was no output due to the error.
>
> Christian T. Stackhouse | Graduate Student
> GBS Neuroscience Theme
> Department of Neurosurgery
> Department of Radiation Oncology
> UAB | The University of Alabama at Birmingham
> Hazelrig-Salter Radiation Oncology Center | 1700 6th Ave S | Birmingham, AL
> 35233
> M: 919.724.6890 | ctsta...@uab.edu | cstackho...@uabmc.edu |
> ctsta...@gmail.com
>
> uab.edu
> Knowledge that will change your world
>
>
> ________________________________________
> From: Jim Lemon <drjimle...@gmail.com>
> Sent: Tuesday, March 22, 2016 5:46 PM
> To: Christian T Stackhouse (Campus)
> Cc: r-help@r-project.org
> Subject: Re: [R] Help batch saving elements of a list into unique files
>
> Sorry, should be:
>
> names(out[[affdf]])<-
> lapply(unlist(strsplit(names(out[[affdf]]),"[.]")),drop_token1)
>
> Jim
>
>
> On Wed, Mar 23, 2016 at 9:43 AM, Christian T Stackhouse (Campus)
> <ctsta...@uab.edu> wrote:
>> Thank you, Jim. I got this error returned:
>>
>> Error in strsplit(names(out[[affdf]])) :
>> argument "split" is missing, with no default
>>
>> Christian T. Stackhouse | Graduate Student
>> GBS Neuroscience Theme
>> Department of Neurosurgery
>> Department of Radiation Oncology
>> UAB | The University of Alabama at Birmingham
>> Hazelrig-Salter Radiation Oncology Center | 1700 6th Ave S | Birmingham, AL
>> 35233
>> M: 919.724.6890 | ctsta...@uab.edu | cstackho...@uabmc.edu |
>> ctsta...@gmail.com
>>
>> uab.edu
>> Knowledge that will change your world
>>
>>
>> ________________________________________
>> From: Jim Lemon <drjimle...@gmail.com>
>> Sent: Tuesday, March 22, 2016 5:39 PM
>> To: Christian T Stackhouse (Campus)
>> Cc: r-help@r-project.org
>> Subject: Re: [R] Help batch saving elements of a list into unique files
>>
>> Okay, I just snipped off the first token in the header labels assuming
>> that there would be no more periods. Try this:
>>
>> drop_token1<-function(x) {
>> return(paste(x[2:length(x)],sep="."))
>> }
>> for(affdf in 1:length(out)) {
>> names(out[[affdf]])<-lapply(unlist(strsplit(names(out[[affdf]]))),drop_token1)
>> write.csv(out[[affdf]],file=paste("affymetrix",affdf,".txt",sep=""))
>> }
>>
>> Jim
>>
>> On Wed, Mar 23, 2016 at 9:13 AM, Christian T Stackhouse (Campus)
>> <ctsta...@uab.edu> wrote:
>>> Jim,
>>>
>>> It worked! It wrote out the files, but unfortunately, it didn't work for
>>> the file headers. I should have mentioned this is what the headers look
>>> like: X0.Classical.10.11.1_.HuEx.1_0.st.v2..CEL
>>> After running your script, that header changes to: 10. I'd just like to
>>> remove the "X0." prefix or in the case of file 189 the "X188." prefix
>>> leaving: Classical.10.11.1_.HuEx.1_0.st.v2..CEL
>>>
>>> Thank you so much for your help! I'll try playing with it myself, but if
>>> you have any further insights they would be greatly appreciated!
>>>
>>> Best,
>>>
>>> Christian T. Stackhouse | Graduate Student
>>> GBS Neuroscience Theme
>>> Department of Neurosurgery
>>> Department of Radiation Oncology
>>> UAB | The University of Alabama at Birmingham
>>> Hazelrig-Salter Radiation Oncology Center | 1700 6th Ave S | Birmingham, AL
>>> 35233
>>> M: 919.724.6890 | ctsta...@uab.edu | cstackho...@uabmc.edu |
>>> ctsta...@gmail.com
>>>
>>> uab.edu
>>> Knowledge that will change your world
>>>
>>>
>>> ________________________________________
>>> From: Jim Lemon <drjimle...@gmail.com>
>>> Sent: Tuesday, March 22, 2016 4:48 PM
>>> To: Christian T Stackhouse (Campus)
>>> Cc: r-help@r-project.org
>>> Subject: Re: [R] Help batch saving elements of a list into unique files
>>>
>>> Hi Christian,
>>> This untested script might get you going (assuming you want a CSV format):
>>>
>>> for(affdf in 1:length(out)) {
>>> names(out[[affdf]])<-lapply(strsplit(names(out[[affdf]]),"[.]"),"[",2)
>>> write.csv(out[[affdf]],file=paste("affymetrix",affdf,".txt",sep=""))
>>> }
>>>
>>> Jim
>>>
>>>
>>> On Wed, Mar 23, 2016 at 6:32 AM, Christian T Stackhouse (Campus)
>>> <ctsta...@uab.edu> wrote:
>>>> Hello!
>>>>
>>>>
>>>> The overall goal I have is taking a large data frame and splitting it into
>>>> several smaller data frames (preserving column headers) which I can save
>>>> as txt files to feed into my APACHE ANY23 server for conversion into RDF.
>>>>
>>>>
>>>> This is what I call to split up the original file:
>>>>
>>>>
>>>> out <- split(affymetrix, (seq(nrow(affymetrix))-1) %/% 140)
>>>>
>>>>
>>>> I have a list (out) of length 187 for which each element is a dataframe. I
>>>> want to iteratively save each data frame as a separate tab file with a
>>>> naming structure such as: affymetrix1.txt, affymetrix2.txt, ...
>>>> affymetrix187.txt
>>>>
>>>>
>>>> Before that, I need to modify the headers to remove a prefix "X0. , X1.,
>>>> ... X187." that was introduced during my original splitting. I need to
>>>> remove all characters before and including the first "."
>>>>
>>>>
>>>> If anyone has a better way of doing this, please let me know. Otherwise,
>>>> help with how to perform batch editing of the headers and batch saving of
>>>> the files would be greatly appreciated!
>>>>
>>>>
>>>> Best,
>>>>
>>>> Christian T. Stackhouse | Graduate Student
>>>> GBS Neuroscience Theme
>>>> Department of Neurosurgery
>>>> Department of Radiation Oncology
>>>> UAB | The University of Alabama at Birmingham
>>>> Hazelrig-Salter Radiation Oncology Center | 1700 6th Ave S | Birmingham,
>>>> AL 35233
>>>> M: 919.724.6890 | ctsta...@uab.edu | cstackho...@uabmc.edu |
>>>> ctsta...@gmail.com
>>>>
>>>> uab.edu<http://uab.edu/>
>>>> Knowledge that will change your world
>>>>
>>>>
>>>> [[alternative HTML version deleted]]
>>>>
>>>> ______________________________________________
>>>> R-help@r-project.org mailing list -- To UNSUBSCRIBE and more, see
>>>> https://stat.ethz.ch/mailman/listinfo/r-help
>>>> PLEASE do read the posting guide
>>>> http://www.R-project.org/posting-guide.html
>>>> and provide commented, minimal, self-contained, reproducible code.
______________________________________________
R-help@r-project.org mailing list -- To UNSUBSCRIBE and more, see
https://stat.ethz.ch/mailman/listinfo/r-help
PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
and provide commented, minimal, self-contained, reproducible code.
