Hi Sebastian
I think I found the package by accident when I did a search of the
Cran package page for"latex" but did not use it as it could not do a
very particular problem.
If there was no other alternative use the add.to.row argument of xtable
A while ago I needed to add some info from the summary of a glm an I
think I did it by using the add.to.row argument and
"\multicolumn{n}{l}{text} & " value
where n is the number of columns for the text and the value is the
summary subscript object.
Be careful of "\" which has to be "\\" and carriage returns
I know its a bit kludgy but if I was doing more of them I would make
a template for my text editor which cuts down the work.
Regards
Duncan
At 09:45 11/10/2012, you wrote:
I am also interested in the standard errors, but beneath not next to
the point estimates which is standard in the xtable package.
If you by any chance remember the name of the package or how to do
it that would be much appreciated!
Cheers,
Sebastian
On Oct 10, 2012, at 7:10 PM, Duncan Mackay <mac...@northnet.com.au> wrote:
> Hi
>
> If you just want the coefficients.
>
> xtable(summary(fe)$coef)
> % latex table generated in R 2.15.1 by xtable 1.7-0 package
> % Thu Oct 11 09:04:59 2012
> \begin{table}[ht]
> \begin{center}
> \begin{tabular}{rrrrr}
> \hline
> & Estimate & Std. Error & t-value & Pr($>$$|$t$|$) \\
> \hline
> x & 0.12 & 0.07 & 1.78 & 0.08 \\
> \hline
> \end{tabular}
> \end{center}
> \end{table}
>
> There is another package whose name eludes me which may help for
tables which have different outputs to the output of lm etc
>
> HTH
>
> Duncan
>
> Duncan Mackay
> Department of Agronomy and Soil Science
> University of New England
> Armidale NSW 2351
> Email: home: mac...@northnet.com.au
>
>
>
> At 05:09 11/10/2012, you wrote:
>> HI,
>>
>> May be you can use library(texreg):
>>
>> library(plm)
>>
>> #generating some data
>> x <- rnorm(270)
>> y <- rnorm(270)
>> t <- rep(1:3,30)
>> i <- rep(1:90, each=3)
>>
>> data <- data.frame(i,t,x,y)
>>
>> fe <- plm(y~x,data=data,model="within")
>> summary(fe)
>> library(texreg)
>> fe1<-extract.plm(fe) #extract the plm object
>>
>> library(xtable)
>>
>> xtable(do.call(rbind,lapply(fe1,function(x) data.frame(x))))
>> % latex table generated in R 2.15.0 by xtable 1.7-0 package
>> % Wed Oct 10 14:59:10 2012
>> \begin{table}[ht]
>> \begin{center}
>> \begin{tabular}{rr}
>> \hline
>> & x \\
>> \hline
>> Estimate & -0.03 \\
>> Std. Error & 0.08 \\
>> Pr($>$$|$t$|$) & 0.68 \\
>> R\$\verb|^|2\$ & 0.00 \\
>> Adj. R\$\verb|^|2\$ & 0.00 \\
>> Num. obs. & 270.00 \\
>> \hline
>> \end{tabular}
>> \end{center}
>> \end{table}
>> #Another example. In this case, you can create two tables from
the zz1 list
>> data("Produc", package = "plm")
>> zz <- plm(log(gsp) ~ log(pcap) + log(pc) + log(emp) + unemp,
data = Produc, index = c("state","year"))
>> zz1<-extract.plm(zz)
>>
>>
>> lapply(lapply(zz1,function(x) data.frame(x)),xtable)
>> [[1]]
>> % latex table generated in R 2.15.0 by xtable 1.7-0 package
>> % Wed Oct 10 15:08:02 2012
>> \begin{table}[ht]
>> \begin{center}
>> \begin{tabular}{rrrr}
>> \hline
>> & Estimate & Std..Error & Pr...t.. \\
>> \hline
>> log(pcap) & -0.03 & 0.03 & 0.37 \\
>> log(pc) & 0.29 & 0.03 & 0.00 \\
>> log(emp) & 0.77 & 0.03 & 0.00 \\
>> unemp & -0.01 & 0.00 & 0.00 \\
>> \hline
>> \end{tabular}
>> \end{center}
>> \end{table}
>>
>> [[2]]
>> % latex table generated in R 2.15.0 by xtable 1.7-0 package
>> % Wed Oct 10 15:08:02 2012
>> \begin{table}[ht]
>> \begin{center}
>> \begin{tabular}{rr}
>> \hline
>> & x \\
>> \hline
>> R\$\verb|^|2\$ & 0.94 \\
>> Adj. R\$\verb|^|2\$ & 0.88 \\
>> Num. obs. & 816.00 \\
>> \hline
>> \end{tabular}
>> \end{center}
>> \end{table}
>>
>>
>> Hope it helps.
>>
>> A.K.
>>
>>
>>
>>
>>
>>
>>
>> ----- Original Message -----
>> From: Sebastian Barfort <sb3...@nyu.edu>
>> To: r-help@r-project.org
>> Cc:
>> Sent: Wednesday, October 10, 2012 1:07 PM
>> Subject: [R] Exporting summary plm results to latex
>>
>> Dear all,
>>
>> I am trying to export my fixed effect results to Latex. I am
using the plm package with the summary function. However, it does
not look like apsrtable, stargazer, or any other package can
accompany using the plm package.
>>
>> I am interested in a classic table with the coefficient in one
row followed by the standard error in paranthesis in the next row
and stars by the coefficient to show relevant coefficient level.
>>
>> coefficient 1 xxx**
>> (xxx)
>>
>> Here is a reproducible example:
>>
>> library(plm)
>>
>> #generating some data
>> x <- rnorm(270)
>> y <- rnorm(270)
>> t <- rep(1:3,30)
>> i <- rep(1:90, each=3)
>>
>> data <- data.frame(i,t,x,y)
>>
>> fe <- plm(y~x,data=data,model="within")
>> summary(fe)
>>
>> If there is an alternative to using the plm package that works
with any of the export to latex packages, I would be very
interested to know. Otherwise, any ideas of how to solve this
problem are very welcome. I almost exclusively use fixed effect
panel models, and the problem of exporting results to Latex is one
of the things preventing me from switching entirely from Stata to R.
>>
>>
>> Kind regards,
>> Sebastian
>>
>>
>> [[alternative HTML version deleted]]
>>
>> ______________________________________________
>> R-help@r-project.org mailing list
>> https://stat.ethz.ch/mailman/listinfo/r-help
>> PLEASE do read the posting guide
http://www.R-project.org/posting-guide.html
>> and provide commented, minimal, self-contained, reproducible code.
>>
>>
>> ______________________________________________
>> R-help@r-project.org mailing list
>> https://stat.ethz.ch/mailman/listinfo/r-help
>> PLEASE do read the posting guide
http://www.R-project.org/posting-guide.html
>> and provide commented, minimal, self-contained, reproducible code.
>
> ______________________________________________
> R-help@r-project.org mailing list
> https://stat.ethz.ch/mailman/listinfo/r-help
> PLEASE do read the posting guide
http://www.R-project.org/posting-guide.html
> and provide commented, minimal, self-contained, reproducible code.
______________________________________________
R-help@r-project.org mailing list
https://stat.ethz.ch/mailman/listinfo/r-help
PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
and provide commented, minimal, self-contained, reproducible code.
