Many thanks to Uwe Ligges, Peter Ehlers, and Dennis Murphy for suggesting
work-arounds for this bug. Because the suggestions are work-arounds, rather
than actually correcting the bug, I have opted simply to copy and paste the
plotting commands a few times with the subscripts specified as constants
instead of as evaluated variables (and to use the easy and familiar savePlot
command for EPS output). For future cases that have more iterations through
a loop, I may resort to the suggested workarounds. Thanks again.
John K. Kruschke, Professor
On Thu, Jun 23, 2011 at 12:27 PM, Peter Ehlers <ehl...@ucalgary.ca> wrote:
>
> I think that there may be a problem with the way
> bquote(), for() and savePlot() play together in
> the OP's example (multiple plots on a windows device;
> bquote using the loop index).
>
> Here's a version using replayPlot():
>
> ## show mu with subscripts 4 and 9:
> x11()
> par(mfrow = c(2,1))
> for (i in c(4, 9)) {
> plot(0, 0, main = bquote(mu[.(i)]))
> }
>
> ## now record and replay:
> z <- recordPlot()
> replayPlot(z)
> ## both subscripts are now 9
>
>
> Simple workarounds are:
>
> 1. As Uwe and Dennis show, for saving to file,
> use the appropriate device.
>
> 2. For recalling plots (e.g. with recording turned on),
> a) use substitute() instead of bquote() or
> b) insert something like
> i <- i
> before the plot() call.
>
> sessionInfo()
> R version 2.13.0 Patched (2011-05-24 r55981)
> Platform: i386-pc-mingw32/i386 (32-bit)
>
> locale:
> [1] LC_COLLATE=English_Canada.1252 LC_CTYPE=English_Canada.1252
> [3] LC_MONETARY=English_Canada.**1252 LC_NUMERIC=C
> [5] LC_TIME=English_Canada.1252
>
> attached base packages:
> [1] stats graphics grDevices utils datasets methods base
>
> Peter Ehlers
>
>
>
> On 2011-06-22 22:14, Dennis Murphy wrote:
>
>> Hi:
>>
>> As Uwe suggested...
>>
>> pdf('testgraph.pdf')
>> layout( matrix( 1:2 , nrow=2 ) )
>> for ( i in 1:2 ) {
>> plot( 0 , 0 , xlab=bquote(mu[.(i)]) )
>> }
>> dev.off()
>>
>> postscript('testgraph.ps')
>> layout( matrix( 1:2 , nrow=2 ) )
>> for ( i in 1:2 ) {
>> plot( 0 , 0 , xlab=bquote(mu[.(i)]) )
>> }
>> dev.off()
>>
>> png('testgraph.png')
>> layout( matrix( 1:2 , nrow=2 ) )
>> for ( i in 1:2 ) {
>> plot( 0 , 0 , xlab=bquote(mu[.(i)]) )
>> }
>> dev.off()
>>
>> The three graphs look the same (although the PS graph is rotated to
>> landscape while the other two are portrait). The main point is that
>> mu_1 and mu_2 show up correctly in the two panels in all three graphs
>> (at least on my viewers).
>>
>> The following thread from last January describes some of the problems
>> that certain viewers have with Greek letters, which appear to be
>> viewer and platform dependent:
>>
>> http://r-project.markmail.org/**search/?q=pdf%20incorrect#**
>> query:pdf%20incorrect+page:2+**mid:egmb6utulrxgcznw+state:**results<http://r-project.markmail.org/search/?q=pdf%20incorrect#query:pdf%20incorrect+page:2+mid:egmb6utulrxgcznw+state:results>
>>
>> I'm guessing that I've seen about a half dozen or so similar posts in
>> this forum over the past year and a half, so you can check the list
>> archives for related problems.
>>
>> HTH,
>> Dennis
>>
>> On Wed, Jun 22, 2011 at 8:07 PM, John
>> Kruschke<johnkruschke@gmail.**com<johnkrusc...@gmail.com>>
>> wrote:
>>
>>> Here's a fairly minimal-case example in which the saved EPS does not
>>> match
>>> the screen. The error comes when using bquote(.(i)) instead of bquote(1),
>>> as
>>> demonstrated by the two minimally different cases below. Very strange.
>>> Any
>>> clues as to why?
>>>
>>> #---------------- begin -------------------
>>>
>>> # Version A. X axis labels have subscripts as constants. EPS is correct.
>>> windows()
>>> layout( matrix( 1:2 , nrow=2 ) )
>>> plot( 0 , 0 , xlab=bquote(mu[1]) )
>>> plot( 0 , 0 , xlab=bquote(mu[2]) )
>>> savePlot( file="SavePlotTestA.eps" , type="eps" ) # Axis labels are
>>> correct
>>> in EPS.
>>>
>>> # Version B. X axis labels have subscripts as variable index. EPS is
>>> wrong!
>>> windows()
>>> layout( matrix( 1:2 , nrow=2 ) )
>>> for ( i in 1:2 ) {
>>> plot( 0 , 0 , xlab=bquote(mu[.(i)]) )
>>> }
>>> savePlot( file="SavePlotTestB.eps" , type="eps" ) # X-AXIS OF PLOT 1 IS
>>> WRONG IN EPS.
>>>
>>> #-------------- end ---------------------
>>>
>>> Thanks!
>>>
>>> John K. Kruschke, Professor
>>> <http://www.indiana.edu/%**7Ekruschke/**DoingBayesianDataAnalysis/<http://www.indiana.edu/%7Ekruschke/DoingBayesianDataAnalysis/>
>>> >
>>>
>>>
>>> 2011/6/22 Uwe
>>> Ligges<lig...@statistik.tu-**dortmund.de<lig...@statistik.tu-dortmund.de>
>>> >
>>>
>>>
>>>>
>>>> On 22.06.2011 13:50, John Kruschke wrote:
>>>>
>>>> The error happens when using the savePlot() command, like this:
>>>>> savePlot( file="TestSavePlot.eps" , type="eps" )
>>>>> savePlot( file="TestSavePlot.jpg" , type="jpg" )
>>>>>
>>>>>
>>>> Well, plot directly into a device, for postscript:
>>>>
>>>> postscript("estSavePlot.eps", additionalArguments .....)
>>>> plot(1:10)
>>>> dev.off()
>>>>
>>>> Uwe Ligges
>>>>
>>>>
>>>> The images in the two saved files are not the same, with the JPG being
>>>>
>>>>> correct but the EPS being wrong.
>>>>>
>>>>> When you suggest "starting separate devices explicitly", what do you
>>>>> mean?
>>>>> (I've skimmed through the results of ??device, but can't make sense of
>>>>> it.)
>>>>> Thank you!
>>>>>
>>>>> John K. Kruschke, Professor
>>>>>
>>>>>
>>>>> 2011/6/22 Uwe
>>>>> Ligges<lig...@statistik.tu-**d**ortmund.de<http://dortmund.de>
>>>>> <ligges@statistik.**tu-dortmund.de <lig...@statistik.tu-dortmund.de>>
>>>>>
>>>>>>
>>>>>>
>>>>> I guess you use the menu to save the plots from your Windows device
>>>>> into
>>>>>
>>>>>> files rather than starting separate devices explicitly?
>>>>>> If so, please use explicit calls to the devices and everything happens
>>>>>> as
>>>>>> you define it.
>>>>>>
>>>>>> Uwe Ligges
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On 22.06.2011 04:31, John Kruschke wrote:
>>>>>>
>>>>>> When I save a particular plot as JPG or BMP, the saved image is an
>>>>>>
>>>>>>> accurate
>>>>>>> copy of that plot.
>>>>>>> But when I save the same plot as EPS or PDF, some text elements are
>>>>>>> incorrectly altered.
>>>>>>> An example is attached. Notice in the top middle and top right
>>>>>>> panels,
>>>>>>> the
>>>>>>> x-axis labels have correct subscript 1 in the JPG, but incorrect
>>>>>>> subscript
>>>>>>> 2
>>>>>>> in the EPS.
>>>>>>>
>>>>>>> I'm using R 2.13.0 on Windows 7.
>>>>>>>
>>>>>>> Any clues regarding the source of this error and its solution would
>>>>>>> be
>>>>>>> appreciated. For example, are there EPS/PDF device drivers that need
>>>>>>> to
>>>>>>> be
>>>>>>> separately updated?
>>>>>>>
>>>>>>> Many thanks.
>>>>>>>
>>>>>>> John K. Kruschke, Professor
>>>>>>> <http://www.indiana.edu/%******7Ekruschke/******
>>>>>>> DoingBayesianDataAnalysis/<
>>>>>>> htt**p://www.indiana.edu/%****7Ekruschke/****
>>>>>>> DoingBayesianDataAnalysis/<htt**p://www.indiana.edu/%**7Ekruschke/**
>>>>>>> DoingBayesianDataAnalysis/<http://www.indiana.edu/%7Ekruschke/DoingBayesianDataAnalysis/>
>>>>>>> >
>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> ______________________________******________________
>>>>>>> R-help@r-project.org mailing list
>>>>>>> https://stat.ethz.ch/mailman/******listinfo/r-help<https://stat.ethz.ch/mailman/****listinfo/r-help>
>>>>>>> <https://**stat.ethz.ch/mailman/****listinfo/r-help<https://stat.ethz.ch/mailman/**listinfo/r-help>
>>>>>>> >
>>>>>>> <https://stat.**ethz.ch/**mailman/listinfo/r-**help<http://ethz.ch/mailman/listinfo/r-**help>
>>>>>>> <http**s://stat.ethz.ch/mailman/**listinfo/r-help<https://stat.ethz.ch/mailman/listinfo/r-help>
>>>>>>> >
>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>> PLEASE do read the posting guide http://www.R-project.org/**
>>>>>>> posting-guide.html<http://www.****R-project.org/posting-guide.**
>>>>>>> **html<http://www.R-project.**org/posting-guide.html<http://www.R-project.org/posting-guide.html>
>>>>>>> >
>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>> and provide commented, minimal, self-contained, reproducible code.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>> [[alternative HTML version deleted]]
>>>
>>> ______________________________**________________
>>> R-help@r-project.org mailing list
>>> https://stat.ethz.ch/mailman/**listinfo/r-help<https://stat.ethz.ch/mailman/listinfo/r-help>
>>> PLEASE do read the posting guide http://www.R-project.org/**
>>> posting-guide.html <http://www.R-project.org/posting-guide.html>
>>> and provide commented, minimal, self-contained, reproducible code.
>>>
>>>
>> ______________________________**________________
>> R-help@r-project.org mailing list
>> https://stat.ethz.ch/mailman/**listinfo/r-help<https://stat.ethz.ch/mailman/listinfo/r-help>
>> PLEASE do read the posting guide http://www.R-project.org/**
>> posting-guide.html <http://www.R-project.org/posting-guide.html>
>> and provide commented, minimal, self-contained, reproducible code.
>>
>
>
[[alternative HTML version deleted]]
______________________________________________
R-help@r-project.org mailing list
https://stat.ethz.ch/mailman/listinfo/r-help
PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
and provide commented, minimal, self-contained, reproducible code.
