On 17-Nov-10 00:02:39, José Fernando Zea Castro wrote:
> Hello.
> First, I'm thankful about your wonderful project.
>
> However, I have serious worries about the reliability of R.
> I found the next bug which I consider important because in
> my job everytime We work with datanames like next. Please
> see below:
>
> b=data.frame(matrix(1:9,ncol=3))
> names(b)=c("q99","r88","s77")
>
> >b
> q99 r88 s77
> 1 1 4 7
> 2 2 5 8
> 3 3 6 9
>> b$q9
> [1] 1 2 3
>
>
> Please note that the variable q9 does not exist in the dataframe,
. but you can see that R show q9 (as q99).
>
> Thank in advanced
>
> Cordially
> José Fernando Zea Castro
> Statistician Universidad Nacional Colombiana
What you see here is a case of "partial matching": You ask for
'b$q9', and R sees that 'q9' matches the beginning of 'q99'
and nothing else. Therefore it responds with the value of 'b$q99',
since there is no ambiguity.
You would have got the same result if you had asked for
b$q
since there is no component name in b which matches 'q' except 'q99'.
If there had been two components which matched 'q9', say both
b$q99 and b$q98, then you would have got a NULL result, since
there is not a unique match.
However, if you also have b$q9 and b$q99 in b, then R would find that
b$q9 was an *exact* (not partial) match, and would return that one.
Normally, this should not cause problems. However, if you have
written code which must take special action if a name is not
present in a list, then there could be problems.
For example, if b might (depending on what has happened) contain
b$q9 only, or b$q99 only, or *both* b$q9 and b$q99, and you want
to execute special actions if a name is not present in b, then
in the case where b contained only b$q99 and you asked for b$q9,
you would get the wrong result because of partial matching.
This is one of those cases, in my opinion, where R's documentation
drops you into a flat landscape, in the middle of nowhere, in a
thick mist. What is needed is to be able to set an option such
that R will *only* respond with exact matches, e.g. something
like options(partial.match=FALSE). I have spent about 20 minutes
trying to locate the possible existence of such an option, or a
similar way of suppressing partial matching. No success!
The closest I could get was the set of options, settable using
options(... = ...):
'warnPartialMatchArgs': logical. If true, warns if partial
matching is used in argument matching.
'warnPartialMatchAttr': logical. If true, warns if partial
matching is used in extracting attributes via 'attr'.
'warnPartialMatchDollar': logical. If true, warns if partial
matching is used for extraction by '$'.
which concerns only the issue of warnings in such cases, and has
nothing to do with suppressing partial matching.
Maybe others know better!
Best wishes,
Ted.
--------------------------------------------------------------------
E-Mail: (Ted Harding) <ted.hard...@wlandres.net>
Fax-to-email: +44 (0)870 094 0861
Date: 17-Nov-10 Time: 09:41:03
------------------------------ XFMail ------------------------------
______________________________________________
R-help@r-project.org mailing list
https://stat.ethz.ch/mailman/listinfo/r-help
PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
and provide commented, minimal, self-contained, reproducible code.
