On Mon, 22 Oct 2007, Dieter Best wrote:
> Hello there,
>
> I am not quite sure how to interpret the output of Rprof (in the following the
> output I was staring at). I was poking around the web a little bit for
>documentation but without much success. I guess if I want to figure out what
>takes so long in my code the 2nd table $by.total and the total.pct column (pct
> = percent) is the most helpful. What does it mean that [ or [.data.frame is
>taking so much time, and is there something I could do to improve the
> situation.
It means that [.data.frame is taking a long time. This does happen -- it is a
very general function and it can do a lot of memory allocation. The first
thing to check is that you have a current version of R, since there have been
improvements in recent versions.
You may be able to use a matrix or a list instead of a data frame. If so, this
is likely to be faster. Otherwise it depends on exactly what you are doing.
-thomas
>> summaryRprof(tmp)
> $by.self
> self.time self.pct total.time total.pct
> eval.with.vis 75.92 22.4 339.18 100.0
> [.data.frame 46.28 13.6 186.36 54.9
> structure 31.78 9.4 79.92 23.6
> inherits 27.28 8.0 29.08 8.6
> match 20.38 6.0 53.84 15.9
> names 20.20 6.0 20.20 6.0
> length 9.68 2.9 9.68 2.9
> pmatch 9.02 2.7 10.46 3.1
> [ 8.56 2.5 194.92 57.5
> eval 5.84 1.7 31.02 9.1
> any 5.78 1.7 6.88 2.0
> match.arg 5.68 1.7 40.54 12.0
> is.factor 4.68 1.4 32.28 9.5
> cor 4.66 1.4 67.44 19.9
> [[ 4.32 1.3 13.46 4.0
> stopifnot 4.10 1.2 11.94 3.5
> <Anonymous> 4.08 1.2 4.56 1.3
> deparse 3.86 1.1 23.92 7.1
> [[.data.frame 3.70 1.1 9.14 2.7
> == 3.20 0.9 3.20 0.9
> vector 2.80 0.8 11.94 3.5
> rank 2.40 0.7 22.58 6.7
>> 2.16 0.6 2.16 0.6
> ! 1.92 0.6 1.92 0.6
> %in% 1.86 0.5 25.48 7.5
> switch 1.68 0.5 1.76 0.5
> names<- 1.56 0.5 1.78 0.5
> < 1.54 0.5 1.54 0.5
> .deparseOpts 1.50 0.4 11.98 3.5
> match.call 1.48 0.4 2.84 0.8
> .Call 1.34 0.4 1.34 0.4
> is.na 1.30 0.4 1.30 0.4
> all 1.24 0.4 1.48 0.4
> formals 1.22 0.4 2.46 0.7
> mode 1.22 0.4 1.32 0.4
> sum 1.20 0.4 1.62 0.5
> sys.parent 1.14 0.3 1.14 0.3
> as.character 0.98 0.3 0.98 0.3
> parent.frame 0.96 0.3 0.96 0.3
> attributes<- 0.90 0.3 0.90 0.3
> sys.call 0.86 0.3 1.36 0.4
> list 0.82 0.2 0.82 0.2
> & 0.74 0.2 0.74 0.2
> sys.function 0.58 0.2 1.22 0.4
> attr<- 0.58 0.2 0.58 0.2
> is.logical 0.56 0.2 0.56 0.2
> Rank 0.54 0.2 23.18 6.8
> != 0.54 0.2 0.54 0.2
> : 0.52 0.2 0.52 0.2
> - 0.46 0.1 0.46 0.1
> as.vector 0.44 0.1 0.44 0.1
> .subset2 0.36 0.1 0.36 0.1
> min 0.34 0.1 0.34 0.1
> seq_along 0.34 0.1 0.34 0.1
> max 0.32 0.1 0.32 0.1
> is.data.frame 0.24 0.1 1.72 0.5
> is.character 0.18 0.1 0.18 0.1
> is.matrix 0.18 0.1 0.18 0.1
> oldClass<- 0.18 0.1 0.18 0.1
> is.list 0.16 0.0 0.16 0.0
> ( 0.14 0.0 0.14 0.0
> dim 0.14 0.0 0.14 0.0
> ^ 0.12 0.0 0.12 0.0
> is.pairlist 0.10 0.0 0.10 0.0
> is.null 0.08 0.0 0.08 0.0
> attributes 0.06 0.0 0.06 0.0
> is.atomic 0.06 0.0 0.06 0.0
> baseenv 0.04 0.0 0.04 0.0
> is.call 0.04 0.0 0.04 0.0
> is.name 0.04 0.0 0.04 0.0
> is.expression 0.02 0.0 0.02 0.0
> source 0.00 0.0 339.18 100.0
> $by.total
> total.time total.pct self.time self.pct
> eval.with.vis 339.18 100.0 75.92 22.4
> source 339.18 100.0 0.00 0.0
> [ 194.92 57.5 8.56 2.5
> [.data.frame 186.36 54.9 46.28 13.6
> structure 79.92 23.6 31.78 9.4
> cor 67.44 19.9 4.66 1.4
> match 53.84 15.9 20.38 6.0
> match.arg 40.54 12.0 5.68 1.7
> is.factor 32.28 9.5 4.68 1.4
> eval 31.02 9.1 5.84 1.7
> inherits 29.08 8.6 27.28 8.0
> %in% 25.48 7.5 1.86 0.5
> deparse 23.92 7.1 3.86 1.1
> Rank 23.18 6.8 0.54 0.2
> rank 22.58 6.7 2.40 0.7
> names 20.20 6.0 20.20 6.0
> [[ 13.46 4.0 4.32 1.3
> .deparseOpts 11.98 3.5 1.50 0.4
> stopifnot 11.94 3.5 4.10 1.2
> vector 11.94 3.5 2.80 0.8
> pmatch 10.46 3.1 9.02 2.7
> length 9.68 2.9 9.68 2.9
> [[.data.frame 9.14 2.7 3.70 1.1
> any 6.88 2.0 5.78 1.7
> <Anonymous> 4.56 1.3 4.08 1.2
> == 3.20 0.9 3.20 0.9
> match.call 2.84 0.8 1.48 0.4
> formals 2.46 0.7 1.22 0.4
>> 2.16 0.6 2.16 0.6
> ! 1.92 0.6 1.92 0.6
> names<- 1.78 0.5 1.56 0.5
> switch 1.76 0.5 1.68 0.5
> is.data.frame 1.72 0.5 0.24 0.1
> sum 1.62 0.5 1.20 0.4
> < 1.54 0.5 1.54 0.5
> all 1.48 0.4 1.24 0.4
> sys.call 1.36 0.4 0.86 0.3
> .Call 1.34 0.4 1.34 0.4
> mode 1.32 0.4 1.22 0.4
> is.na 1.30 0.4 1.30 0.4
> sys.function 1.22 0.4 0.58 0.2
> sys.parent 1.14 0.3 1.14 0.3
> as.character 0.98 0.3 0.98 0.3
> parent.frame 0.96 0.3 0.96 0.3
> attributes<- 0.90 0.3 0.90 0.3
> list 0.82 0.2 0.82 0.2
> & 0.74 0.2 0.74 0.2
> attr<- 0.58 0.2 0.58 0.2
> is.logical 0.56 0.2 0.56 0.2
> != 0.54 0.2 0.54 0.2
> : 0.52 0.2 0.52 0.2
> - 0.46 0.1 0.46 0.1
> as.vector 0.44 0.1 0.44 0.1
> .subset2 0.36 0.1 0.36 0.1
> min 0.34 0.1 0.34 0.1
> seq_along 0.34 0.1 0.34 0.1
> max 0.32 0.1 0.32 0.1
> is.character 0.18 0.1 0.18 0.1
> is.matrix 0.18 0.1 0.18 0.1
> oldClass<- 0.18 0.1 0.18 0.1
> is.list 0.16 0.0 0.16 0.0
> ( 0.14 0.0 0.14 0.0
> dim 0.14 0.0 0.14 0.0
> ^ 0.12 0.0 0.12 0.0
> is.pairlist 0.10 0.0 0.10 0.0
> is.null 0.08 0.0 0.08 0.0
> attributes 0.06 0.0 0.06 0.0
> is.atomic 0.06 0.0 0.06 0.0
> baseenv 0.04 0.0 0.04 0.0
> is.call 0.04 0.0 0.04 0.0
> is.name 0.04 0.0 0.04 0.0
> is.expression 0.02 0.0 0.02 0.0
> $sampling.time
> [1] 339.18
>
> __________________________________________________
>
>
>
> [[alternative HTML version deleted]]
>
> ______________________________________________
> R-help@r-project.org mailing list
> https://stat.ethz.ch/mailman/listinfo/r-help
> PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
> and provide commented, minimal, self-contained, reproducible code.
>
Thomas Lumley Assoc. Professor, Biostatistics
[EMAIL PROTECTED] University of Washington, Seattle
______________________________________________
R-help@r-project.org mailing list
https://stat.ethz.ch/mailman/listinfo/r-help
PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
and provide commented, minimal, self-contained, reproducible code.
