Apparently you created id_rsa key pair with a passphrase. Passphrase
is like an additional password protection layer on your ssh key. I
don't know how did you create it. But you can always create a new one
(you should delete the old one before you create a new one) using the
shell command 'ssh-keygen'. It asks for a passphrase, just push enter
for an empty passphrase (twice). You also have to update the ssh
public key (id_rsa.pub) on github by supplying the new public key
(id_rsa.pub).
There are some implications you should be aware of:
* if you delete id_rsa*, you cannot use any ssh authorization that
relies on this key any more (that's why you have to update on GH).
>From the what you write (... created 2 days ago) I guess you do not
use these keys elsewhere but I may be wrong.
* if you supply empty passphrase, you bypass the optional extra
security layer. I think this is OK for open source software
development on your personal computer but your preferences/situation
may differ.
* You cannot use the same keys with passphrase if they are created
without one. This is likely not an issue, but if it turns out to be a
problem, you can either add passphrase to the default keys, or create
another set of keys, passphrase protected.
Cheers,
Ott
On Sun, Jun 30, 2019 at 9:51 PM Spencer Graves
<[email protected] <mailto:[email protected]>> wrote:
On 2019-06-30 06:58, Joshua Ulrich wrote:
<snip>
> I imported both packages into separate repositories:
>https://github.com/joshuaulrich/tmp-ecdat
>https://github.com/joshuaulrich/tmp-ecfun
>
> I changed your email address on your R-Forge commits to match your
> GitHub email address, so R-Forge commits would be associated
with your
> GitHub account. I also omitted the "move" commit from Ecdat,
and the
> "obsolete > GitHub" commits from both packages. I've attached a
file
> with the commands I used, if anyone is interested.
>
> You can use my repos by cloning them to your local machine, adding
> your repos as new remotes, and pushing to them. You would need
to run
> these commands (untested):
>
> ### clone my GitHub repo to your machine
> git [email protected]:joshuaulrich/tmp-ecfun.git Ecdat
Thanks so much. Sadly, I'm still having troubles. This "git
clone ..."
generates:
Enter passphrase for key '/Users/sbgraves/.ssh/id_rsa':
Sadly, I don't know the passphrase it's looking for here,
and I
don't know how to find what it's looking for. Under GitHub >
Settings >
"SSH and GPG keys", I see an SSH key dated two days ago, when I
cloned
Ecdat from within RStudio. And in "~.ssh" I see files id_rsa and
id_rsa.pub, both created two days ago.
What do you suggest I try to get past this?
Thanks again for all your help.
Spencer Graves
> cd Ecdat
> ### rename my GitHub repo remote from 'origin' to 'tmp'
> git remote rename origin tmp
> ### add your GitHub repo remote as 'origin'
> ### NOTE: this should be a new, clean repo.
> ### Rename your existing 'Ecdat' so you don't overwrite it
> git remote add originhttps://github.com/sbgraves237/Ecdat
> ### push to your GitHub repo
> git push -u origin master
>
> Then you need to run similar commands for Ecfun.
>
> Best,
> Josh
>
>>> Thanks,
>>> Spencer
>>>
>>>
>>> On 2019-06-29 14:09, Henrik Bengtsson wrote:
>>>> On Sat, Jun 29, 2019 at 9:43 AM Spencer Graves
>>>> <[email protected]
<mailto:[email protected]>> wrote:
>>>>> Hi, Ott et al.:
>>>>>
>>>>>
>>>>> What's the best way to get "Travis CI" to build and
test the two
>>>>> packages, Ecdat and Ecfun, that have long been combined in
the Ecdat
>>>>> project?
>>>>>
>>>>>
>>>>> Following Ott's advice and studying studying
Wickham's "R
>>>>> Packages" (http://r-pkgs.had.co.nz/), I was able to
configure RStudio so
>>>>> it would sync using git with
"GitHub.com/sbgraves237/Ecdat". However,
>>>>> when I tried to configure "Travis CI", it said, "No
DESCRIPTION file
>>>>> found, user must supply their own install and script steps".
>>>>>
>>>>>
>>>>> Earlier in this thread, I think someone suggested I
make the
>>>>> Ecdat and Ecfun packages separate projects on GitHub (though
I can't
>>>>> find that suggestion now). This would not be an issue if it
were all
>>>>> local without version control. With RStudio managing my
interface with
>>>>> GitHub, it now seems quite tricky.
>>>> I'm 99.999% confident that your life will be much much easier
if you
>>>> keep one R package per repository. If you don't, you'll
probably be
>>>> very lonely when it comes to tools etc. There are built-in 'git'
>>>> commands, but also git utility tools, for extracting a subset of
>>>> folders/files from git repository into new git repositories.
You'll
>>>> still preserve the commit history. I would deal with this in the
>>>> terminal, using the 'git' client and possible some extraction
tool.
>>>>
>>>> Also, while you spend time on this, have a look at the commit
>>>> authorship that I mentioned previously. It's nice to have
that in
>>>> place later.
>>>>
>>>> After you got the above in place, then .travis.yml and
appveyor.yml is
>>>> pretty straightforward (might even be a copy'n'paste).
>>>>
>>>> Finally, I saw you put your credentials in the URL when you
cloned. I
>>>> don't think that's safe, your GitHub credentials will be
stored in the
>>>> ./.git/config file. Instead, just clone with:
>>>>
>>>> git clonehttps://github.com/sbgraves237/Ecdat.git
>>>>
>>>> You can then configure git to cache your HTTPS credentials for a
>>>> certain time, e.g. 120 minutes, so you don't have to enter
them each
>>>> time you pull/push. See
https://git-scm.com/docs/git-credential-cache
>>>> for details. That's what I tell new-comers to
Git(Hub|Lab|...) to
>>>> use. Personally, I add my public SSH key to GitHub and then
clone
>>>> with the ssh protocol:
>>>>
>>>> git [email protected]:sbgraves237/Ecdat.git
>>>>
>>>> That way my I never have to worry entering my credentials.
>>>>
>>>> /Henrik
>>>>
>>>>> Suggestions?
>>>>> Thanks again to all who have offered suggestions so
far. This
>>>>> migration from R-Forge to GitHub seems complete except for
the automatic
>>>>> tests provided via "Travis CI".
>>>>>
>>>>>
>>>>> Spencer
>>>>>
>>>>>
>>>>> On 2019-06-28 22:25, Ott Toomet wrote:
>>>>>> Apparently your username/password are wrong. Can you
clone/push from
>>>>>> other repos?
>>>>>>
>>>>>> You do not need authorization when cloning a public repo,
so even
>>>>>> incorrect credentials may work (haven't tested this
though). But for
>>>>>> push you have to have that in order.
>>>>>>
>>>>>> I suggest you create ssh keys, upload those to GH, and use ssh
>>>>>> authorization instead of https.
>>>>>>
>>>>>> Cheers,
>>>>>> Ott
>>>>>>
>>>>>> On Fri, Jun 28, 2019 at 8:18 PM Spencer Graves
>>>>>> <[email protected]
<mailto:[email protected]>
<mailto:[email protected]
<mailto:[email protected]>>> wrote:
>>>>>>
>>>>>> Thanks to Duncan, Henrik and Henrik, Brian, and Gábor:
>>>>>>
>>>>>>
>>>>>> I created a local copy of the new GitHub
version using the
>>>>>> following:
>>>>>>
>>>>>> git clone
>>>>>>https://sbgraves237:[email protected]/sbgraves237/Ecdat.git
>>>>>>
>>>>>>
>>>>>>
>>>>>> That worked in the sense that I got a local
copy. However,
>>>>>> after
>>>>>> I rolled the version number and did "git commit" on
the DESCRIPTION
>>>>>> files, my "git push" command generated the following:
>>>>>>
>>>>>>
>>>>>> remote: Invalid username or password.
>>>>>> fatal: Authentication failed for
>>>>>>
'https://sbgraves237:[email protected]/sbgraves237/Ecdat.git/'
>>>>>>
>>>>>>
>>>>>> What am I missing? [Note: I used my actual GitHub
>>>>>> password in
>>>>>> place of "mypassword" here, and this "Authentication
failed" message
>>>>>> reported the GitHub password I used here.]
>>>>>>
>>>>>>
>>>>>> Thanks,
>>>>>> Spencer
>>>>>>
>>>>>>
>>>>>> p.s. I'm doing this under macOS Mojave 10.14.5.
Also, I added
>>>>>> ".onAttach" functions to the R-Forge versions as
Brian G. Peterson
>>>>>> suggested. That seemed to work fine.
>>>>>>
>>>>>>
>>>>>> On 2019-06-28 07:13, Duncan Murdoch wrote:
>>>>>> > On 28/06/2019 6:26 a.m., Gábor Csárdi wrote:
>>>>>> >
>>>>>> >> Instead, you can do as Duncan suggested, and put a
README in your
>>>>>> >> R-Forge
>>>>>> >> repository, that points to *your* GitHub
repositor(y/ies). Then the
>>>>>> >>https://github.com/rforge/ecdat read only mirror
will pick this up
>>>>>> >> and will
>>>>>> >> point there as well.
>>>>>> >
>>>>>> > Just for the record: that was Henrik Singmann's
suggestion, I just
>>>>>> > agreed with it.
>>>>>> >
>>>>>> > Duncan Murdoch
>>>>>> >
>>>>>>
>>>>>>
>>>>>> [[alternative HTML version deleted]]
>>>>>>
>>>>>> ______________________________________________
>>>>>>[email protected] <mailto:[email protected]>
<mailto:[email protected] <mailto:[email protected]>>
mailing list
>>>>>>https://stat.ethz.ch/mailman/listinfo/r-devel
>>>>>>
>>>>> [[alternative HTML version deleted]]
>>>>>
>>>>> ______________________________________________
>>>>>[email protected] <mailto:[email protected]> mailing
list
>>>>>https://stat.ethz.ch/mailman/listinfo/r-devel
>>> ______________________________________________
>>>[email protected] <mailto:[email protected]> mailing list
>>>https://stat.ethz.ch/mailman/listinfo/r-devel
>>
>>
>> --
>> Joshua Ulrich | about.me/joshuaulrich
<http://about.me/joshuaulrich>
>> FOSS Trading |www.fosstrading.com <http://www.fosstrading.com>
>
>
______________________________________________
[email protected] <mailto:[email protected]> mailing list
https://stat.ethz.ch/mailman/listinfo/r-devel
