Hi!
I had reported problems with the RTL8111/8168/8411 ethernet controller
and Qubes OS before. In the meantime I found out that it does not work
when Windows 10 was running, and after a "restart" Qubes SO is booted.
The effect is interesting: The card detects whether the link goes up or
down, detects the proper speed, tries DHCP, but never gets an address.
Only when I power don the PC and reboot Qubes OS, I get an address from
DHCP. I suspect that the card isn't fully reset when Qubes OS boots.
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 11)
Subsystem: ASUSTeK Computer Inc. Device 859e
Flags: bus master, fast devsel, latency 0, IRQ 18
I/O ports at d000 [size=256]
Memory at f7d00000 (64-bit, non-prefetchable) [size=4K]
Memory at f0300000 (64-bit, prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 01-00-00-00-33-4c-cd-00
Capabilities: [170] Latency Tolerance Reporting
Kernel driver in use: pciback
Kernel modules: r8169
Kernel: 4.19.107-1.pvops.qubes.x86_64
Regards,
Ulrich
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/qubes-users/ddbbcc7e-9960-ec31-8348-10a78a59276f%40rz.uni-regensburg.de.
