On Mon, 11 Aug 2003 20:09:16 +0200, Peter Graf wrote:
> .../...
>
> If someone buys a new ethernet card with the RTL8019AS for Qx0, other than
> from D&D Systems, he should be prepared to deal with cutting the IRQ10+11
> lines on the Ethernet card near the ISA connector. The corresponding pins
> on the ISA connector are D3 and D4.
>
> Soldering side of the ethernet card, ISA connector:
>
> B1....................................B31 D1 D2 D3 D4..........D18
>
> No guarantees. Please don't cut something you don't really want to cut :-)
> To be on the save side, there are tested new cards available from D&D Systems.
> I can also provide one for you if you find it more convenient.
>
> For use with Qx0, it is strongly recommended to use jumpered mode, IRQ5 and
> iobase 0x300.
Tracks cut, IRQ set to 5, I/O base to 0x300: It works !!! :-)
For info, my Ethernet card is a Fiber Line FL-1840 (made in China) and the
RTL8019AS (buggy) chip got 08019S1 / 045F as its serial number.
Many thanks !! Expect the Q60/Q40 Linux website back 'soon' with plenty of
RPMs compiled for the Linux shoestring distribution.
Thierry.
PS: I happen to remember someone mentionning the port of lwIP or uIP for
SMSQ/E. Does it work ? If yes, where to get it ?
