Am 25. Juli 2023 14:58:20 UTC schrieb "Philippe Mathieu-Daudé" <[email protected]>: >From: Bernhard Beschow <[email protected]> > >Since commit c0a55a0c9da2 "hw/sd/sdhci: Support big endian SD host controller >interfaces" sdhci_common_realize() forces all SD card controllers to use either >sdhci_mmio_le_ops or sdhci_mmio_be_ops, depending on the "endianness" property. >However, there are device models which use different MMIO ops: TYPE_IMX_USDHC >uses usdhc_mmio_ops and TYPE_S3C_SDHCI uses sdhci_s3c_mmio_ops. > >Forcing sdhci_mmio_le_ops breaks SD card handling on the "sabrelite" board, for >example. Fix this by defaulting the io_ops to little endian and switch to big >endian in sdhci_common_realize() only if there is a matchig big endian variant >available. > >Fixes: c0a55a0c9da2 ("hw/sd/sdhci: Support big endian SD host controller >interfaces") > >Signed-off-by: Bernhard Beschow <[email protected]> >Tested-by: Guenter Roeck <[email protected]> >Message-Id: <[email protected]> Ping qemu-stable AFAIU the regression happens since 8.0, thus would be great to have a fix there. Best regards, Bernhard >--- > hw/sd/sdhci.c | 8 +++++++- > 1 file changed, 7 insertions(+), 1 deletion(-) > >diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c >index 6811f0f1a8..362c2c86aa 100644 >--- a/hw/sd/sdhci.c >+++ b/hw/sd/sdhci.c >@@ -1382,6 +1382,8 @@ void sdhci_initfn(SDHCIState *s) > > s->insert_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, > sdhci_raise_insertion_irq, s); > s->transfer_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, sdhci_data_transfer, > s); >+ >+ s->io_ops = &sdhci_mmio_le_ops; > } > > void sdhci_uninitfn(SDHCIState *s) >@@ -1399,9 +1401,13 @@ void sdhci_common_realize(SDHCIState *s, Error **errp) > > switch (s->endianness) { > case DEVICE_LITTLE_ENDIAN: >- s->io_ops = &sdhci_mmio_le_ops; >+ /* s->io_ops is little endian by default */ > break; > case DEVICE_BIG_ENDIAN: >+ if (s->io_ops != &sdhci_mmio_le_ops) { >+ error_setg(errp, "SD controller doesn't support big endianness"); >+ return; >+ } > s->io_ops = &sdhci_mmio_be_ops; > break; > default:
