"Michael S. Tsirkin" <[email protected]> writes:
> On Thu, Nov 24, 2022 at 09:21:15AM +0000, Alex Bennée wrote: >> >> "Michael S. Tsirkin" <[email protected]> writes: >> >> > On Wed, Nov 23, 2022 at 04:03:49PM +0000, Alex Bennée wrote: >> >> >> >> "Michael S. Tsirkin" <[email protected]> writes: >> >> >> >> > On Wed, Nov 23, 2022 at 03:21:32PM +0000, Alex Bennée wrote: >> >> >> Hi, >> >> >> >> >> >> This hopefully fixes the problems with VirtIO migration caused by the >> >> >> previous refactoring of virtio_device_started(). That introduced a >> >> >> different order of checking which didn't give the VM state primacy but >> >> >> wasn't noticed as we don't properly exercise VirtIO device migration >> >> >> and caused issues when dev->started wasn't checked in the core code. >> >> >> The introduction of virtio_device_should_start() split the overloaded >> >> >> function up but the broken order still remained. The series finally >> >> >> fixes that by restoring the original semantics but with the cleaned up >> >> >> functions. >> >> >> >> >> >> I've added more documentation to the various structures involved as >> >> >> well as the functions. There is still some inconsistencies in the >> >> >> VirtIO code between different devices but I think that can be looked >> >> >> at over the 8.0 cycle. >> >> > >> >> > >> >> > Thanks a lot! Did you try this with gitlab CI? A patch similar to your >> >> > 2/2 broke it previously ... >> >> >> >> Looking into it now - so far hasn't broken locally but I guess there is >> >> something different about the CI. >> > >> > >> > yes - pls push to gitlab, create pipeline e.g. with QEMU_CI set to 2 >> > >> > Or with QEMU_CI set to 1 and then run fedora container and then >> > clang-system manually. >> >> I'm having trouble re-creating the failures in CI locally on my boxen. I >> have triggered a bug on s390 but that looks like a pre-existing problem >> with VRING_SET_ENDIAN being triggered for the vhost-user-gpio tests. I >> think that is a limitation of the test harness. >> >> Will keep looking. > > Why not just trigger it on gitlab CI - it's very repeatable there? I can repeat a problem locally on Debian Bullseye and Ubuntu 22.04 with clang and leak sanitizer: # QEMU configure log Thu 24 Nov 16:02:56 GMT 2022 # Configured with: '../../configure' '--cc=clang' '--cxx=clang++' '--enable-sanitizers' '--target-list=arm-softmmu,aarch64-softmmu,i386-softmmu,x86_64-softmmu,ppc64-softmmu'# And the command: env QTEST_QEMU_BINARY=./qemu-system-arm QTEST_QEMU_STORAGE_DAEMON_BINARY=./storage-daemon/qemu-storage-daemon QTEST_QEMU_IMG=./qemu-img MALLOC_PERTURB_=178 G_TEST_DBUS_DAEMON=/home/alex.bennee/lsrc/qemu.git/tests/dbus-vmstate-daemon.sh ./tests/qtest/qos-test -p /arm/virt/virtio-mmio/virtio-bus/vhost-user-gpio-device/vhost-user-gpio/vhost-user-gpio-tests/read-guest-mem/memfile/subprocess Gives the following failure, while a leak may not be that exciting it does point to a potential corruption issue. Unfortunately I don't get a decent backtrace from the tool: # random seed: R02S071fe8d68317a8b01e5e7fadbf1ac60a # starting QEMU: exec ./qemu-system-arm -qtest unix:/tmp/qtest-1024352.sock -qtest-log /dev/null -chardev socket,path=/tmp/qtest-1024352.qmp,id=char0 -mon chardev=char0,mode=control -display none -machine none -accel qtest ==1024354==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases! # Start of arm tests # Start of virt tests # Start of virtio-mmio tests # Start of virtio-bus tests # Start of vhost-user-gpio-device tests # Start of vhost-user-gpio tests # Start of vhost-user-gpio-tests tests # Start of read-guest-mem tests # Start of memfile tests # starting QEMU: exec ./qemu-system-arm -qtest unix:/tmp/qtest-1024352.sock -qtest-log /dev/null -chardev socket,path=/tmp/qtest-1024352.qmp,id=char0 -mon chardev=char0,mode=control -display none -M virt -device vhost-user-gpio-device,id=gpio0,chardev=chr-vhost-user-test -m 256 -object memory-backend-memfd,id=mem,size=256M, -numa node,memdev=mem -chardev socket,id=chr-vhost-user-test,path=/tmp/vhost-test-8DD2V1/vhost-user-test.sock -accel qtest # GLib-DEBUG: setenv()/putenv() are not thread-safe and should not be used after threads are created ==1024371==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases! # set_protocol_features: 0x200 # set_owner: start of session # vhost-user: un-handled message: 14 # vhost-user: un-handled message: 14 # set_vring_num: 0/1024 qemu-system-arm: Failed to set msg fds. qemu-system-arm: vhost VQ 0 ring restore failed: -22: Invalid argument (22) qemu-system-arm: Failed to set msg fds. qemu-system-arm: vhost VQ 1 ring restore failed: -22: Invalid argument (22) qemu-system-arm: Failed to set msg fds. qemu-system-arm: vhost_set_vring_call failed: Invalid argument (22) qemu-system-arm: Failed to set msg fds. qemu-system-arm: vhost_set_vring_call failed: Invalid argument (22) ok 1 /arm/virt/virtio-mmio/virtio-bus/vhost-user-gpio-device/vhost-user-gpio/vhost-user-gpio-tests/read-guest-mem/memfile/subprocess # SKIP No memory at address 0x0 # End of memfile tests # End of read-guest-mem tests # End of vhost-user-gpio-tests tests # End of vhost-user-gpio tests # End of vhost-user-gpio-device tests # End of virtio-bus tests # End of virtio-mmio tests # End of virt tests # End of arm tests 1..1 ================================================================= ==1024371==ERROR: LeakSanitizer: detected memory leaks Direct leak of 240 byte(s) in 1 object(s) allocated from: #0 0x561d9a5d7a18 in __interceptor_calloc (/home/alex.bennee/lsrc/qemu.git/builds/all.clang-sanitizers/qemu-system-arm+0x1d1fa18) (BuildId: 0bdc7c2ada2277089db16d57f17c314e9e53e41c) #1 0x7f46ee656c40 in g_malloc0 (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x5ec40) (BuildId: 0ab0b740e34eeb0c84656ba53737f4c440dfbed4) #2 0x561d9bf7875b in virtio_device_realize /home/alex.bennee/lsrc/qemu.git/builds/all.clang-sanitizers/../../hw/virtio/virtio.c:4175:9 #3 0x561d9c321bf4 in device_set_realized /home/alex.bennee/lsrc/qemu.git/builds/all.clang-sanitizers/../../hw/core/qdev.c:566:13 #4 0x561d9c33dda8 in property_set_bool /home/alex.bennee/lsrc/qemu.git/builds/all.clang-sanitizers/../../qom/object.c:2285:5 #5 0x561d9c338fb3 in object_property_set /home/alex.bennee/lsrc/qemu.git/builds/all.clang-sanitizers/../../qom/object.c:1420:5 #6 0x561d9c344c7c in object_property_set_qobject /home/alex.bennee/lsrc/qemu.git/builds/all.clang-sanitizers/../../qom/qom-qobject.c:28:10 #7 0x561d9b367954 in qdev_device_add /home/alex.bennee/lsrc/qemu.git/builds/all.clang-sanitizers/../../softmmu/qdev-monitor.c:733:11 #8 0x561d9b36f832 in qemu_create_cli_devices /home/alex.bennee/lsrc/qemu.git/builds/all.clang-sanitizers/../../softmmu/vl.c:2536:5 #9 0x561d9b36f832 in qmp_x_exit_preconfig /home/alex.bennee/lsrc/qemu.git/builds/all.clang-sanitizers/../../softmmu/vl.c:2604:5 #10 0x561d9b37613f in qemu_init /home/alex.bennee/lsrc/qemu.git/builds/all.clang-sanitizers/../../softmmu/vl.c:3601:9 #11 0x561d9a6125a5 in main /home/alex.bennee/lsrc/qemu.git/builds/all.clang-sanitizers/../../softmmu/main.c:47:5 SUMMARY: AddressSanitizer: 240 byte(s) leaked in 1 allocation(s). ../../tests/qtest/libqtest.c:179: kill_qemu() tried to terminate QEMU process but encountered exit status 1 (expected 0) fish: Job 1, 'env QTEST_QEMU_BINARY=./qemu-sy…' terminated by signal SIGABRT (Abort) 🕙22:26:18 alex.bennee@hackbox2:qemu.git/builds/all.clang-sanitizers on for-7.2/virtio-fixes [$?] [⚡ IOT] ✗ >> > >> >> > >> >> >> Alex Bennée (2): >> >> >> include/hw: attempt to document VirtIO feature variables >> >> >> include/hw: VM state takes precedence in virtio_device_should_start >> >> >> >> >> >> include/hw/virtio/vhost.h | 25 +++++++++++++++++++--- >> >> >> include/hw/virtio/virtio.h | 43 ++++++++++++++++++++++++++++++++------ >> >> >> 2 files changed, 59 insertions(+), 9 deletions(-) >> >> >> >> >> >> -- >> >> >> 2.34.1 >> >> >> >> >> >> -- >> >> Alex Bennée >> >> >> -- >> Alex Bennée -- Alex Bennée
