On Jul 6 08:12, Klaus Jensen wrote: > From: Klaus Jensen <[email protected]> > > This adds mandatory features of NVM Express v1.3 to the emulated NVMe > device. > > > v3: > * hw/block/nvme: additional tracing > - Reverse logic in nvme_cid(). (Philippe) > - Move nvme_cid() and nvme_sqid() to source file. (Philippe) > * hw/block/nvme: fix missing endian conversion > - Move this patch to very early in the series and fix the bug properly as > suggested by Philippe. Then let the change trickle down through > the series. (Philippe) > * hw/block/nvme: add remaining mandatory controller parameters > - Move the nvme_feature_{support,default} arrays to the source file. > (Philippe) > - Add a NVME_FID_MAX constant. (Philippe) > * hw/block/nvme: support the get/set features select and save fields > - Move the nvme_feature_cap array to the source file. (Philippe) > * hw/block/nvme: reject invalid nsid values in active namespace id list > - Rework the condition and add a comment and reference to the spec. > (Philippe) > * hw/block/nvme: provide the mandatory subnqn field > - Change to use strpadcpy(). (Philippe) > > Had to clear some R-b's due to functional changes. > > Missing review: 2, 3, 7, 12, 16, 17 > > > v2: > * hw/block/nvme: bump spec data structures to v1.3 > - Shorten some constants. (Dmitry) > * hw/block/nvme: add temperature threshold feature > - Remove unused temp_thresh member. (Dmitry) > * hw/block/nvme: add support for the get log page command > - Change the temperature field in the NvmeSmartLog struct to be an > uint16_t and handle wierd alignment by adding QEMU_PACKED to the > struct. (Dmitry) > * hw/block/nvme: add remaining mandatory controller parameters > - Fix spelling. (Dmitry) > * hw/block/nvme: support the get/set features select and save fields > - Fix bad logic causing temperature thresholds to always report > defaults. (Dmitry) > * hw/block/nvme: reject invalid nsid values in active namespace id list > - Added patch; reject the 0xfffffffe and 0xffffffff nsid values. > > > $ git-backport-diff -u for-master/bump-to-v1.3-v2 -r upstream/master... -S > Key: > [----] : patches are identical > [####] : number of functional differences between upstream/downstream patch > [down] : patch is downstream-only > The flags [FC] indicate (F)unctional and (C)ontextual differences, > respectively > > 001/18:[----] [--] 'hw/block/nvme: bump spec data structures to v1.3' > 002/18:[0008] [FC] 'hw/block/nvme: fix missing endian conversion' > 003/18:[0028] [FC] 'hw/block/nvme: additional tracing' > 004/18:[----] [--] 'hw/block/nvme: add support for the abort command' > 005/18:[0004] [FC] 'hw/block/nvme: add temperature threshold feature' > 006/18:[----] [--] 'hw/block/nvme: mark fw slot 1 as read-only' > 007/18:[----] [--] 'hw/block/nvme: add support for the get log page command' > 008/18:[0002] [FC] 'hw/block/nvme: add support for the asynchronous event > request command' > 009/18:[----] [--] 'hw/block/nvme: move NvmeFeatureVal into hw/block/nvme.h' > 010/18:[----] [--] 'hw/block/nvme: flush write cache when disabled' > 011/18:[0044] [FC] 'hw/block/nvme: add remaining mandatory controller > parameters' > 012/18:[0024] [FC] 'hw/block/nvme: support the get/set features select and > save fields' > 013/18:[----] [--] 'hw/block/nvme: make sure ncqr and nsqr is valid' > 014/18:[----] [--] 'hw/block/nvme: support identify namespace descriptor list' > 015/18:[0008] [FC] 'hw/block/nvme: reject invalid nsid values in active > namespace id list' > 016/18:[----] [--] 'hw/block/nvme: enforce valid queue creation sequence' > 017/18:[0006] [FC] 'hw/block/nvme: provide the mandatory subnqn field' > 018/18:[----] [--] 'hw/block/nvme: bump supported version to v1.3' > > > Klaus Jensen (18): > hw/block/nvme: bump spec data structures to v1.3 > hw/block/nvme: fix missing endian conversion > hw/block/nvme: additional tracing > hw/block/nvme: add support for the abort command > hw/block/nvme: add temperature threshold feature > hw/block/nvme: mark fw slot 1 as read-only > hw/block/nvme: add support for the get log page command > hw/block/nvme: add support for the asynchronous event request command > hw/block/nvme: move NvmeFeatureVal into hw/block/nvme.h > hw/block/nvme: flush write cache when disabled > hw/block/nvme: add remaining mandatory controller parameters > hw/block/nvme: support the get/set features select and save fields > hw/block/nvme: make sure ncqr and nsqr is valid > hw/block/nvme: support identify namespace descriptor list > hw/block/nvme: reject invalid nsid values in active namespace id list > hw/block/nvme: enforce valid queue creation sequence > hw/block/nvme: provide the mandatory subnqn field > hw/block/nvme: bump supported version to v1.3 > > block/nvme.c | 18 +- > hw/block/nvme.c | 676 ++++++++++++++++++++++++++++++++++++++++-- > hw/block/nvme.h | 22 +- > hw/block/trace-events | 27 +- > include/block/nvme.h | 225 +++++++++++--- > 5 files changed, 892 insertions(+), 76 deletions(-) > > -- > 2.27.0 > >
Thanks for the reviews everyone, applied to nvme-next. Klaus
