From: Guenter Roeck <[email protected]>
USB1 and USB2 interrupt numbers were swapped. USB_PHY2 interrupt number
is 45. That didn't really matter up to now since the interrupts were not
used, but it needs to be fixed to be able to wire up the USB controllers.
Fixes: 31cbf933f0e ("i.MX6UL: Add i.MX6UL SOC")
Signed-off-by: Guenter Roeck <[email protected]>
Message-id: [email protected]
Reviewed-by: Peter Maydell <[email protected]>
Signed-off-by: Peter Maydell <[email protected]>
---
include/hw/arm/fsl-imx6ul.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h
index eda389aec7d..5a420785b95 100644
--- a/include/hw/arm/fsl-imx6ul.h
+++ b/include/hw/arm/fsl-imx6ul.h
@@ -241,10 +241,10 @@ enum FslIMX6ULIRQs {
FSL_IMX6UL_UART7_IRQ = 39,
FSL_IMX6UL_UART8_IRQ = 40,
- FSL_IMX6UL_USB1_IRQ = 42,
- FSL_IMX6UL_USB2_IRQ = 43,
+ FSL_IMX6UL_USB1_IRQ = 43,
+ FSL_IMX6UL_USB2_IRQ = 42,
FSL_IMX6UL_USB_PHY1_IRQ = 44,
- FSL_IMX6UL_USB_PHY2_IRQ = 44,
+ FSL_IMX6UL_USB_PHY2_IRQ = 45,
FSL_IMX6UL_CAAM_JQ2_IRQ = 46,
FSL_IMX6UL_CAAM_ERR_IRQ = 47,
--
2.20.1
