On Thu, 6 Feb 2020, at 21:56, Cédric Le Goater wrote:
> The Aspeed SMC Controller can operate in different modes : Read, Fast
> Read, Write and User modes. When the User mode is configured, it
> selects automatically the SPI slave device until the CE_STOP_ACTIVE
> bit is set to 1. When any other modes are configured the device is
> unselected. The HW logic handles the chip select automatically when
> the flash is accessed through its AHB window.
>
> When configuring the CEx Control Register, the User mode logic to
> select and unselect the slave is incorrect and data corruption can be
> seen on machines using two chips, witherspoon and romulus.
>
> Rework the handler setting the CEx Control Register to fix this issue.
>
> Fixes: 7c1c69bca43c ("ast2400: add SMC controllers (FMC and SPI)")
> Signed-off-by: Cédric Le Goater <[email protected]>
Champion!
Reviewed-by: Andrew Jeffery <[email protected]>
