On Wed, Oct 09, 2019 at 11:43:15AM -0400, Cleber Rosa wrote: > On Thu, Sep 26, 2019 at 07:34:24PM +0200, Philippe Mathieu-Daudé wrote: > > Similar to the x86_64/pc test, it boots a Linux kernel on a raspi2 > > board and verify the serial is working. > > > > The kernel image and DeviceTree blob are built by the Raspbian > > project (based on Debian): > > https://www.raspbian.org/RaspbianImages > > as recommended by the Raspberry Pi project: > > https://www.raspberrypi.org/downloads/raspbian/ > > > > If ARM is a target being built, "make check-acceptance" will > > automatically include this test by the use of the "arch:arm" tags. > > > > Alternatively, this test can be run using: > > > > $ avocado run -t arch:arm tests/acceptance > > $ avocado run -t machine:raspi2 tests/acceptance > > > > Signed-off-by: Philippe Mathieu-Daudé <f4...@amsat.org> > > --- > > v3: removed debug printf (Cleber) > > use serial_kernel_cmdline dict > > --- > > tests/acceptance/boot_linux_console.py | 36 ++++++++++++++++++++++++++ > > 1 file changed, 36 insertions(+) > > > > diff --git a/tests/acceptance/boot_linux_console.py > > b/tests/acceptance/boot_linux_console.py > > index 079590f0c8..7eaf6cb60e 100644 > > --- a/tests/acceptance/boot_linux_console.py > > +++ b/tests/acceptance/boot_linux_console.py > > @@ -318,6 +318,42 @@ class BootLinuxConsole(Test): > > self.vm.launch() > > self.wait_for_console_pattern('init started: BusyBox') > > > > + def do_test_arm_raspi2(self, uart_id): > > + """ > > + The kernel can be rebuilt using the kernel source referenced > > + and following the instructions on the on: > > + https://www.raspberrypi.org/documentation/linux/kernel/building.md > > + """ > > + serial_kernel_cmdline = { > > + 0: 'earlycon=pl011,0x3f201000 console=ttyAMA0', > > + } > > + deb_url = ('http://archive.raspberrypi.org/debian/' > > + 'pool/main/r/raspberrypi-firmware/' > > + 'raspberrypi-kernel_1.20190215-1_armhf.deb') > > + deb_hash = 'cd284220b32128c5084037553db3c482426f3972' > > + deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash) > > + kernel_path = self.extract_from_deb(deb_path, '/boot/kernel7.img') > > + dtb_path = self.extract_from_deb(deb_path, > > '/boot/bcm2709-rpi-2-b.dtb') > > + > > + self.vm.set_machine('raspi2') > > + self.vm.set_console() > > + kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + > > + serial_kernel_cmdline[uart_id]) > > + self.vm.add_args('-kernel', kernel_path, > > + '-dtb', dtb_path, > > + '-append', kernel_command_line) > > + self.vm.launch() > > + console_pattern = 'Kernel command line: %s' % kernel_command_line > > + self.wait_for_console_pattern(console_pattern) > > + > > + def test_arm_raspi2_uart0(self): > > + """ > > + :avocado: tags=arch:arm > > + :avocado: tags=machine:raspi2 > > + :avocado: tags=device:pl011 > > + """ > > + self.do_test_arm_raspi2(0) > > + > > def test_s390x_s390_ccw_virtio(self): > > """ > > :avocado: tags=arch:s390x > > -- > > 2.20.1 > > > > Reviewed-by: Cleber Rosa <cr...@redhat.com>
I also meant: Tested-by: Cleber Rosa <cr...@redhat.com>
