Implement write access to GICD_ISACTIVERn and GICD_ICACTIVERn registers in the GICv2. Those registers allow to set or clear the active state of an IRQ in the distributor.
Signed-off-by: Luc Michel <[email protected]> --- hw/intc/arm_gic.c | 41 +++++++++++++++++++++++++++++++++++++++-- 1 file changed, 39 insertions(+), 2 deletions(-) diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c index ea0323f969..5755a4fb2c 100644 --- a/hw/intc/arm_gic.c +++ b/hw/intc/arm_gic.c @@ -982,9 +982,46 @@ static void gic_dist_writeb(void *opaque, hwaddr offset, GIC_CLEAR_PENDING(irq + i, ALL_CPU_MASK); } } + } else if (offset < 0x380) { + /* Interrupt Set Active. */ + irq = (offset - 0x300) * 8 + GIC_BASE_IRQ; + if (irq >= s->num_irq) { + goto bad_reg; + } + + /* This register is banked per-cpu for PPIs */ + int cm = irq < GIC_INTERNAL ? (1 << cpu) : ALL_CPU_MASK; + + for (i = 0; i < 8; i++) { + if (s->security_extn && !attrs.secure && + !GIC_DIST_TEST_GROUP(irq + i, 1 << cpu)) { + continue; /* Ignore Non-secure access of Group0 IRQ */ + } + + if (value & (1 << i)) { + GIC_DIST_SET_ACTIVE(irq + i, cm); + } + } } else if (offset < 0x400) { - /* Interrupt Active. */ - goto bad_reg; + /* Interrupt Clear Active. */ + irq = (offset - 0x380) * 8 + GIC_BASE_IRQ; + if (irq >= s->num_irq) { + goto bad_reg; + } + + /* This register is banked per-cpu for PPIs */ + int cm = irq < GIC_INTERNAL ? (1 << cpu) : ALL_CPU_MASK; + + for (i = 0; i < 8; i++) { + if (s->security_extn && !attrs.secure && + !GIC_DIST_TEST_GROUP(irq + i, 1 << cpu)) { + continue; /* Ignore Non-secure access of Group0 IRQ */ + } + + if (value & (1 << i)) { + GIC_DIST_CLEAR_ACTIVE(irq + i, cm); + } + } } else if (offset < 0x800) { /* Interrupt Priority. */ irq = (offset - 0x400) + GIC_BASE_IRQ; -- 2.17.1
