Thanks Alex for the reply .. > > Can you run under -s -S and gdb step the *guest* and see where it ends > up. The above error is usually indicative of the guest going off into > the weeds somewhere because the hardware isn't what it expects. >
So, after your reply that it might be because of the hardware-mismatch, I kinda took a detour, and installed a arm32 "virt" machine on qemu on a x86_64 host, as per the steps at https://translatedcode.wordpress.com/2016/11/03/installing-debian-on-qemus-32-bit-arm-virt-board/ All went fine, and then I compiled rumprun on this "virt" guest. Finally, upon running, I now get this : ########################################################################################## ajay@debian:~/rumprun-arm32$ qemu-system-arm -machine virt -nographic -kernel helloer.bin qemu: fatal: Trying to execute code outside RAM or ROM at 0x00100000 R00=00000000 R01=00000000 R02=00000000 R03=00000000 R04=00000000 R05=00000000 R06=00000000 R07=00000000 R08=00000000 R09=00000000 R10=00000000 R11=00000000 R12=00000000 R13=00000000 R14=00000000 R15=00100000 PSR=400001d3 -Z-- A svc32 s00=00000000 s01=00000000 d00=0000000000000000 s02=00000000 s03=00000000 d01=0000000000000000 s04=00000000 s05=00000000 d02=0000000000000000 s06=00000000 s07=00000000 d03=0000000000000000 s08=00000000 s09=00000000 d04=0000000000000000 s10=00000000 s11=00000000 d05=0000000000000000 s12=00000000 s13=00000000 d06=0000000000000000 s14=00000000 s15=00000000 d07=0000000000000000 s16=00000000 s17=00000000 d08=0000000000000000 s18=00000000 s19=00000000 d09=0000000000000000 s20=00000000 s21=00000000 d10=0000000000000000 s22=00000000 s23=00000000 d11=0000000000000000 s24=00000000 s25=00000000 d12=0000000000000000 s26=00000000 s27=00000000 d13=0000000000000000 s28=00000000 s29=00000000 d14=0000000000000000 s30=00000000 s31=00000000 d15=0000000000000000 s32=00000000 s33=00000000 d16=0000000000000000 s34=00000000 s35=00000000 d17=0000000000000000 s36=00000000 s37=00000000 d18=0000000000000000 s38=00000000 s39=00000000 d19=0000000000000000 s40=00000000 s41=00000000 d20=0000000000000000 s42=00000000 s43=00000000 d21=0000000000000000 s44=00000000 s45=00000000 d22=0000000000000000 s46=00000000 s47=00000000 d23=0000000000000000 s48=00000000 s49=00000000 d24=0000000000000000 s50=00000000 s51=00000000 d25=0000000000000000 s52=00000000 s53=00000000 d26=0000000000000000 s54=00000000 s55=00000000 d27=0000000000000000 s56=00000000 s57=00000000 d28=0000000000000000 s58=00000000 s59=00000000 d29=0000000000000000 s60=00000000 s61=00000000 d30=0000000000000000 s62=00000000 s63=00000000 d31=0000000000000000 FPSCR: 00000000 Aborted ########################################################################################## Additionally, I compiled rumprun on a beaglebone-green-wireless (arm32 machine), and did the same test. (Fortunately), I got the exact same stacktrace as above, so I guess it's no more an issue with hardware-mismatch now .. Not sure if this is an issue with qemu now, or rumprun ... Thanks and Regards, Ajay
