This series pushes down aio_context_acquire/release to the point
where we can actually reason on using different fine-grained mutexes.
The main infrastructure is introduced in patch 1. The new API aio_co_wake
starts a coroutine with aio_context_acquire/release protection, which
requires tracking each coroutine's "home" AioContext. aio_co_schedule
instead takes care of moving a sleeping coroutine to a different
AioContext, also ensuring that it runs under aio_context_acquire/release.
This is useful to implement bdrv_set_aio_context, as a simpler alternative
to bottom halves. Even though one-shot BHs are already simpler than
what we had before, after this patch aio_co_wake and aio_co_schedule
save you from having to do aio_context_acquire/release explicitly.
After patch 2 to 4, which are just small preparatory changes, patches
5 to 8 provide an example of how to use the new API. In particular patch
5 to 7 implement a new organization of coroutines in the NBD client,
which allows not blocking on partial reply header reads.
Patch 9 introduces helpers for AioContext locking in QED, which is
the most complex AIO-based driver left. Then the actual meat of the
series runs from patch 10 to patch 14, followed by small optimizations
in patches 15 and 16.
The patches do some back and forth in adding/removing
aio_context_acquire/release calls in block/*.c but ultimately a small
number of aio_context_acquire/release pairs are added after the pushdown.
These are mostly in drivers that use external libraries (and actually
they could already be replaced by QemuMutex) and in device models
that support multithreaded operation (aka iothread aka dataplane).
Notably, coroutines need not care about aio_context_acquire/release.
The device models ensure that the first creation of the coroutine has
the AioContext, while aio_co_wake/aio_co_schedule do the same after
they yield. Therefore, most of the files only need to use those two
functions instead of, respectively, qemu_coroutine_enter and
aio_bh_schedule_oneshot.
However, this is only an intermediate step which is needed because the
block layer and qemu-coroutine locks are thread-unsafe. So the next
part will add separate locking, independent of AioContext, to block.c and
mostly block/io.c---this includes making CoMutex thread-safe. Patch 17
therefore already documents the current locking policies block.h to
prepare for the next series.
Paolo
v1->v2:
new patch (4) removing block-obj-y -> io-obj-y dependency
removed QIOChannelRestart from
"io: add methods to set I/O handlers on AioContext"
improved qio_channel_set_aio_context docs, renamed to
qio_channel_attach_aio_context
fixed pasto in "io: make qio_channel_yield aware of AioContexts"
document restrictions in bdrv_aio_cancel due to qemu_aio_ref
converted NBD server to qio_channel_yield too
allow NULL s->read_reply_co
*** BLURB HERE ***
Paolo Bonzini (17):
aio: introduce aio_co_schedule and aio_co_wake
block-backend: allow blk_prw from coroutine context
test-thread-pool: use generic AioContext infrastructure
block: move AioContext and QEMUTimer to libqemuutil
io: add methods to set I/O handlers on AioContext
io: make qio_channel_yield aware of AioContexts
nbd: convert to use qio_channel_yield
coroutine-lock: reschedule coroutine on the AioContext it was running
on
qed: introduce qed_aio_start_io and qed_aio_next_io_cb
aio: push aio_context_acquire/release down to dispatching
block: explicitly acquire aiocontext in timers that need it
block: explicitly acquire aiocontext in callbacks that need it
block: explicitly acquire aiocontext in bottom halves that need it
block: explicitly acquire aiocontext in aio callbacks that need it
aio-posix: partially inline aio_dispatch into aio_poll
async: remove unnecessary inc/dec pairs
block: document fields protected by AioContext lock
Makefile.objs | 5 +-
block/blkdebug.c | 9 +-
block/blkreplay.c | 2 +-
block/block-backend.c | 13 ++-
block/curl.c | 44 ++++++--
block/gluster.c | 9 +-
block/io.c | 38 ++-----
block/iscsi.c | 15 ++-
block/linux-aio.c | 10 +-
block/mirror.c | 12 +-
block/nbd-client.c | 108 ++++++++----------
block/nbd-client.h | 2 +-
block/nfs.c | 9 +-
block/qed-cluster.c | 2 +
block/qed-table.c | 12 +-
block/qed.c | 58 +++++++---
block/qed.h | 3 +
block/sheepdog.c | 29 ++---
block/ssh.c | 29 ++---
block/throttle-groups.c | 2 +
block/win32-aio.c | 9 +-
dma-helpers.c | 2 +
hw/block/virtio-blk.c | 19 +++-
hw/scsi/scsi-bus.c | 2 +
hw/scsi/scsi-disk.c | 15 +++
hw/scsi/scsi-generic.c | 20 +++-
hw/scsi/virtio-scsi.c | 6 +
include/block/aio.h | 38 ++++++-
include/block/block_int.h | 64 ++++++-----
include/io/channel.h | 72 +++++++++++-
include/qemu/coroutine_int.h | 10 +-
include/sysemu/block-backend.h | 14 ++-
io/channel-command.c | 13 +++
io/channel-file.c | 11 ++
io/channel-socket.c | 16 ++-
io/channel-tls.c | 12 ++
io/channel-watch.c | 6 +
io/channel.c | 97 ++++++++++++----
nbd/client.c | 2 +-
nbd/common.c | 9 +-
nbd/server.c | 94 +++++-----------
stubs/Makefile.objs | 2 +
stubs/linux-aio.c | 32 ++++++
stubs/main-loop.c | 8 ++
stubs/set-fd-handler.c | 11 --
tests/Makefile.include | 18 +--
tests/iothread.c | 91 +++++++++++++++
tests/iothread.h | 25 +++++
tests/test-aio-multithread.c | 213 ++++++++++++++++++++++++++++++++++++
tests/test-thread-pool.c | 12 +-
tests/test-vmstate.c | 11 --
trace-events | 4 +
util/Makefile.objs | 5 +-
aio-posix.c => util/aio-posix.c | 60 +++-------
aio-win32.c => util/aio-win32.c | 30 ++---
util/aiocb.c | 55 ++++++++++
async.c => util/async.c | 84 ++++++++++++--
util/qemu-coroutine-lock.c | 5 +-
util/qemu-coroutine-sleep.c | 2 +-
util/qemu-coroutine.c | 8 ++
qemu-timer.c => util/qemu-timer.c | 0
thread-pool.c => util/thread-pool.c | 6 +-
util/trace-events | 1 -
63 files changed, 1155 insertions(+), 465 deletions(-)
create mode 100644 stubs/linux-aio.c
create mode 100644 stubs/main-loop.c
create mode 100644 tests/iothread.c
create mode 100644 tests/iothread.h
create mode 100644 tests/test-aio-multithread.c
rename aio-posix.c => util/aio-posix.c (94%)
rename aio-win32.c => util/aio-win32.c (95%)
create mode 100644 util/aiocb.c
rename async.c => util/async.c (82%)
rename qemu-timer.c => util/qemu-timer.c (100%)
rename thread-pool.c => util/thread-pool.c (98%)
--
2.9.3
