Connect the new Xilinx AXI GPIO devices based on the defaults used in
the ZCU102 reference board design.
Signed-off-by: Alistair Francis <alistair.fran...@xilinx.com>
---
hw/arm/xlnx-ep108.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/hw/arm/xlnx-ep108.c b/hw/arm/xlnx-ep108.c
index 4ec590a..23b3d6e 100644
--- a/hw/arm/xlnx-ep108.c
+++ b/hw/arm/xlnx-ep108.c
@@ -20,14 +20,27 @@
#include "qemu-common.h"
#include "cpu.h"
#include "hw/arm/xlnx-zynqmp.h"
+#include "hw/gpio/xlnx-axi-gpio.h"
#include "hw/boards.h"
#include "qemu/error-report.h"
#include "exec/address-spaces.h"
#include "qemu/log.h"
+#define XLNX_EP108_NUM_AXI_GPIOS 7
+
+/* These can always be changed, but these seven are the default in the
reference
+ * board design.
+ */
+static const uint64_t axi_gpio_addr[XLNX_EP108_NUM_AXI_GPIOS] = {
+ 0xa1000000, 0x401000000, 0x1001000000, 0xb1000000, 0x501000000,
+ 0x4801000000, 0x81000000,
+};
+
typedef struct XlnxEP108 {
XlnxZynqMPState soc;
MemoryRegion ddr_ram;
+
+ XlnxAXIGPIO axi_gpio[XLNX_EP108_NUM_AXI_GPIOS];
} XlnxEP108;
static struct arm_boot_info xlnx_ep108_binfo;
@@ -106,6 +119,19 @@ static void xlnx_ep108_init(MachineState *machine)
sysbus_connect_irq(SYS_BUS_DEVICE(&s->soc.spi[i]), 1, cs_line);
}
+ /* Connect the GPIO devices. These aren't on the board, but they are in
+ * the PL, so we connect them here instead of in the SoC.
+ */
+ for (i = 0; i < XLNX_EP108_NUM_AXI_GPIOS; i++) {
+ object_initialize(&s->axi_gpio[i], sizeof(s->axi_gpio[i]),
+ TYPE_XLNX_AXI_GPIO);
+ qdev_set_parent_bus(DEVICE(&s->axi_gpio[i]), sysbus_get_default());
+
+ object_property_set_bool(OBJECT(&s->axi_gpio[i]), true, "realized",
&error_fatal);
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->axi_gpio[i]), 0, axi_gpio_addr[i]);
+ /* The device supports interrupts, but they aren't connected */
+ }
+
xlnx_ep108_binfo.ram_size = ram_size;
xlnx_ep108_binfo.kernel_filename = machine->kernel_filename;
xlnx_ep108_binfo.kernel_cmdline = machine->kernel_cmdline;
--
2.7.4
