Hello,
The Aspeed AST2500 has one 'SPI' controller for the BMC firmware and
two 'SPI' for the host firmware. All controllers have now the same set
of registers compatible with the AST2400 'FMC' controller and the
legacy 'SMC' controller is fully gone.
This serie adds support for the second SPI controller and for the
segment registers which are used to configure the mapping of each
flash module in the SoC address space.
Thanks,
C.
Cédric Le Goater (6):
aspeed: rename smc object to fmc
aspeed: move the flash module mapping address under the controller
definition
aspeed: extend the number of host SPI controllers
aspeed: add support for the AST2500 SoC SMC controllers
aspeed: create mapping regions for the maximum number of slaves
aspeed: add support for the SMC segment registers
hw/arm/aspeed.c | 4 +-
hw/arm/aspeed_soc.c | 74 +++++++++++------
hw/ssi/aspeed_smc.c | 194 +++++++++++++++++++++++++++++++++++++++++---
include/hw/arm/aspeed_soc.h | 10 ++-
include/hw/ssi/aspeed_smc.h | 3 +-
5 files changed, 241 insertions(+), 44 deletions(-)
--
2.7.4
