> -----Original Message-----
> From: Cédric Le Goater [mailto:[email protected]]
> Sent: Friday, June 17, 2016 2:31 PM
> To: Krzeminski, Marcin (Nokia - PL/Wroclaw)
> <[email protected]>; [email protected]
> Cc: [email protected]; [email protected];
> [email protected]; [email protected]
> Subject: Re: [PATCH v2 08/10] m25p80: Fast read commands family changes.
>
> On 06/17/2016 12:28 PM, [email protected] wrote:
> > From: Marcin Krzeminski <[email protected]>
> >
> > Support for Spansion and Macronix flashes.
> > Additionally Numonyx(Micron) moved from default in fast read commands
> > family. Also moved fast read command decoding to functions.
> >
> > Signed-off-by: Marcin Krzeminski <[email protected]>
>
> Reviewed-by: Cédric Le Goater <[email protected]>
>
> Thanks, it looks better.
>
> C.
>
> > ---
> > hw/block/m25p80.c | 145
> > ++++++++++++++++++++++++++++++++++++++++--------------
> > 1 file changed, 108 insertions(+), 37 deletions(-)
> >
> > diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c index
> > 21998db..f40fa99 100644
> > --- a/hw/block/m25p80.c
> > +++ b/hw/block/m25p80.c
> > @@ -719,6 +719,111 @@ static void reset_memory(Flash *s)
> > DB_PRINT_L(0, "Reset done.\n");
> > }
> >
> > +static void decode_fast_read_cmd(Flash *s) {
> > + s->needed_bytes = get_addr_length(s);
> > + switch (get_man(s)) {
> > + /* Dummy cycles - modeled with bytes writes instead of bits */
> > + case MAN_NUMONYX:
> > + s->needed_bytes += extract32(s->volatile_cfg, 4, 4);
> > + break;
> > + case MAN_MACRONIX:
> > + if (extract32(s->volatile_cfg, 6, 2) == 1) {
> > + s->needed_bytes += 6;
> > + } else {
> > + s->needed_bytes += 8;
> > + }
> > + break;
> > + case MAN_SPANSION:
> > + s->needed_bytes += extract32(s->spansion_cr2v,
> > + SPANSION_DUMMY_CLK_POS,
> > + SPANSION_DUMMY_CLK_LEN
> > + );
> > + break;
> > + default:
> > + break;
> > + }
> > + s->pos = 0;
> > + s->len = 0;
> > + s->state = STATE_COLLECTING_DATA; }
> > +
> > +static void decode_dio_read_cmd(Flash *s) {
> > + s->needed_bytes = get_addr_length(s);
> > + /* Dummy cycles modeled with bytes writes instead of bits */
> > + switch (get_man(s)) {
> > + case MAN_WINBOND:
> > + s->needed_bytes = 4;
> > + break;
> > + case MAN_SPANSION:
> > + s->needed_bytes += extract32(s->spansion_cr2v,
> > + SPANSION_DUMMY_CLK_POS,
> > + SPANSION_DUMMY_CLK_LEN
> > + );
Here and in QuadIO function handling of read mode bytes is missing.
I will add it in v3.
Thanks for review.
Regards,
Marcin
> > + break;
> > + case MAN_NUMONYX:
> > + s->needed_bytes += extract32(s->volatile_cfg, 4, 4);
> > + break;
> > + case MAN_MACRONIX:
> > + switch (extract32(s->volatile_cfg, 6, 2)) {
> > + case 1:
> > + s->needed_bytes += 6;
> > + break;
> > + case 2:
> > + s->needed_bytes += 8;
> > + break;
> > + default:
> > + s->needed_bytes += 4;
> > + break;
> > + }
> > + break;
> > + default:
> > + break;
> > + }
> > + s->pos = 0;
> > + s->len = 0;
> > + s->state = STATE_COLLECTING_DATA; }
> > +
> > +static void decode_qio_read_cmd(Flash *s) {
> > + s->needed_bytes = get_addr_length(s);
> > + /* Dummy cycles modeled with bytes writes instead of bits */
> > + switch (get_man(s)) {
> > + case MAN_WINBOND:
> > + s->needed_bytes = 6;
> > + break;
> > + case MAN_SPANSION:
> > + s->needed_bytes += extract32(s->spansion_cr2v,
> > + SPANSION_DUMMY_CLK_POS,
> > + SPANSION_DUMMY_CLK_LEN
> > + );
> > + break;
> > + case MAN_NUMONYX:
> > + s->needed_bytes += extract32(s->volatile_cfg, 4, 4);
> > + break;
> > + case MAN_MACRONIX:
> > + switch (extract32(s->volatile_cfg, 6, 2)) {
> > + case 1:
> > + s->needed_bytes += 4;
> > + break;
> > + case 2:
> > + s->needed_bytes += 8;
> > + break;
> > + default:
> > + s->needed_bytes += 6;
> > + break;
> > + }
> > + break;
> > + default:
> > + break;
> > + }
> > + s->pos = 0;
> > + s->len = 0;
> > + s->state = STATE_COLLECTING_DATA; }
> > +
> > static void decode_new_cmd(Flash *s, uint32_t value) {
> > s->cmd_in_progress = value;
> > @@ -756,51 +861,17 @@ static void decode_new_cmd(Flash *s, uint32_t
> value)
> > case DOR4:
> > case QOR:
> > case QOR4:
> > - s->needed_bytes = get_addr_length(s);
> > - switch (get_man(s)) {
> > - case MAN_NUMONYX:
> > - s->needed_bytes += extract32(s->volatile_cfg, 4, 4);
> > - break;
> > - default:
> > - break;
> > - }
> > - s->pos = 0;
> > - s->len = 0;
> > - s->state = STATE_COLLECTING_DATA;
> > + decode_fast_read_cmd(s);
> > break;
> >
> > case DIOR:
> > case DIOR4:
> > - switch (get_man(s)) {
> > - case MAN_WINBOND:
> > - case MAN_SPANSION:
> > - s->needed_bytes = 4;
> > - break;
> > - default:
> > - s->needed_bytes = get_addr_length(s);
> > - /* Dummy cycles modeled with bytes writes instead of bits */
> > - s->needed_bytes += extract32(s->volatile_cfg, 4, 4);
> > - }
> > - s->pos = 0;
> > - s->len = 0;
> > - s->state = STATE_COLLECTING_DATA;
> > + decode_dio_read_cmd(s);
> > break;
> >
> > case QIOR:
> > case QIOR4:
> > - switch (get_man(s)) {
> > - case MAN_WINBOND:
> > - case MAN_SPANSION:
> > - s->needed_bytes = 6;
> > - break;
> > - default:
> > - s->needed_bytes = get_addr_length(s);
> > - /* Dummy cycles modeled with bytes writes instead of bits */
> > - s->needed_bytes += extract32(s->volatile_cfg, 4, 4);
> > - }
> > - s->pos = 0;
> > - s->len = 0;
> > - s->state = STATE_COLLECTING_DATA;
> > + decode_qio_read_cmd(s);
> > break;
> >
> > case WRSR:
> >
