On Thu, Sep 24, 2015 at 11:32:01AM -0600, Alex Williamson wrote: > On Thu, 2015-09-24 at 14:33 +1000, David Gibson wrote: > > The current vfio core code assumes that the host IOMMU is capable of > > mapping any IOVA the guest wants to use to where we need. However, real > > IOMMUs generally only support translating a certain range of IOVAs (the > > "DMA window") not a full 64-bit address space. > > > > The common x86 IOMMUs support a wide enough range that guests are very > > unlikely to go beyond it in practice, however the IOMMU used on IBM Power > > machines - in the default configuration - supports only a much more limited > > IOVA range, usually 0..2GiB. > > > > If the guest attempts to set up an IOVA range that the host IOMMU can't > > map, qemu won't report an error until it actually attempts to map a bad > > IOVA. If guest RAM is being mapped directly into the IOMMU (i.e. no guest > > visible IOMMU) then this will show up very quickly. If there is a guest > > visible IOMMU, however, the problem might not show up until much later when > > the guest actually attempt to DMA with an IOVA the host can't handle. > > > > This patch adds a test so that we will detect earlier if the guest is > > attempting to use IOVA ranges that the host IOMMU won't be able to deal > > with. > > > > For now, we assume that "Type1" (x86) IOMMUs can support any IOVA, this is > > incorrect, but no worse than what we have already. We can't do better for > > now because the Type1 kernel interface doesn't tell us what IOVA range the > > IOMMU actually supports. > > > > For the Power "sPAPR TCE" IOMMU, however, we can retrieve the supported > > IOVA range and validate guest IOVA ranges against it, and this patch does > > so. > > > > Signed-off-by: David Gibson <[email protected]> > > Reviewed-by: Laurent Vivier <[email protected]> > > --- > > hw/vfio/common.c | 40 +++++++++++++++++++++++++++++++++++++--- > > include/hw/vfio/vfio-common.h | 6 ++++++ > > 2 files changed, 43 insertions(+), 3 deletions(-) > > > > diff --git a/hw/vfio/common.c b/hw/vfio/common.c > > index 95a4850..f90cc75 100644 > > --- a/hw/vfio/common.c > > +++ b/hw/vfio/common.c > > @@ -343,14 +343,22 @@ static void vfio_listener_region_add(MemoryListener > > *listener, > > if (int128_ge(int128_make64(iova), llend)) { > > return; > > } > > + end = int128_get64(llend); > > + > > + if ((iova < container->min_iova) || ((end - 1) > container->max_iova)) > > { > > + error_report("vfio: IOMMU container %p can't map guest IOVA region" > > + " 0x%"HWADDR_PRIx"..0x%"HWADDR_PRIx, > > + container, iova, end - 1); > > + ret = -EFAULT; /* FIXME: better choice here? */ > > "Bad address" makes sense to me. This looks like an RFC comment, can we > remove it?
Ok.
>
> > + goto fail;
> > + }
> >
> > memory_region_ref(section->mr);
> >
> > if (memory_region_is_iommu(section->mr)) {
> > VFIOGuestIOMMU *giommu;
> >
> > - trace_vfio_listener_region_add_iommu(iova,
> > - int128_get64(int128_sub(llend, int128_one())));
> > + trace_vfio_listener_region_add_iommu(iova, end - 1);
> > /*
> > * FIXME: We should do some checking to see if the
> > * capabilities of the host VFIO IOMMU are adequate to model
> > @@ -387,7 +395,6 @@ static void vfio_listener_region_add(MemoryListener
> > *listener,
> >
> > /* Here we assume that memory_region_is_ram(section->mr)==true */
> >
> > - end = int128_get64(llend);
> > vaddr = memory_region_get_ram_ptr(section->mr) +
> > section->offset_within_region +
> > (iova - section->offset_within_address_space);
> > @@ -685,7 +692,19 @@ static int vfio_connect_container(VFIOGroup *group,
> > AddressSpace *as)
> > ret = -errno;
> > goto free_container_exit;
> > }
> > +
> > + /*
> > + * FIXME: This assumes that a Type1 IOMMU can map any 64-bit
> > + * IOVA whatsoever. That's not actually true, but the current
> > + * kernel interface doesn't tell us what it can map, and the
> > + * existing Type1 IOMMUs generally support any IOVA we're
> > + * going to actually try in practice.
> > + */
> > + container->min_iova = 0;
> > + container->max_iova = (hwaddr)-1;
> > } else if (ioctl(fd, VFIO_CHECK_EXTENSION, VFIO_SPAPR_TCE_IOMMU)) {
> > + struct vfio_iommu_spapr_tce_info info;
> > +
> > ret = ioctl(group->fd, VFIO_GROUP_SET_CONTAINER, &fd);
> > if (ret) {
> > error_report("vfio: failed to set group container: %m");
> > @@ -710,6 +729,21 @@ static int vfio_connect_container(VFIOGroup *group,
> > AddressSpace *as)
> > ret = -errno;
> > goto free_container_exit;
> > }
> > +
> > + /*
> > + * FIXME: This only considers the host IOMMU' 32-bit window.
>
> IOMMU's?
Yes.
> > + * At some point we need to add support for the optional
> > + * 64-bit window and dynamic windows
> > + */
> > + info.argsz = sizeof(info);
> > + ret = ioctl(fd, VFIO_IOMMU_SPAPR_TCE_GET_INFO, &info);
> > + if (ret) {
> > + error_report("vfio: VFIO_IOMMU_SPAPR_TCE_GET_INFO failed: %m");
> > + ret = -errno;
> > + goto free_container_exit;
> > + }
> > + container->min_iova = info.dma32_window_start;
> > + container->max_iova = container->min_iova + info.dma32_window_size
> > - 1;
> > } else {
> > error_report("vfio: No available IOMMU models");
> > ret = -EINVAL;
> > diff --git a/include/hw/vfio/vfio-common.h b/include/hw/vfio/vfio-common.h
> > index fbbe6de..859dbec 100644
> > --- a/include/hw/vfio/vfio-common.h
> > +++ b/include/hw/vfio/vfio-common.h
> > @@ -65,6 +65,12 @@ typedef struct VFIOContainer {
> > MemoryListener listener;
> > int error;
> > bool initialized;
> > + /*
> > + * FIXME: This assumes the host IOMMU can support only a
> > + * single contiguous IOVA window. We may need to generalize
> > + * that in future
> > + */
>
> There sure are a lot of FIXMEs here. This just seems to be an
> implementation note. I certainly encourage comments, but they don't all
> need to start with FIXME unless it's something we really should fix.
> "... may need to generalize..." does not sound like such a case.
True enough. I'll file of some "FIXME"s.
>
> > + hwaddr min_iova, max_iova;
> > QLIST_HEAD(, VFIOGuestIOMMU) giommu_list;
> > QLIST_HEAD(, VFIOGroup) group_list;
> > QLIST_ENTRY(VFIOContainer) next;
>
>
>
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
pgp2HnLC2Vzbu.pgp
Description: PGP signature
