Also adding a "realise" callback. This is to prepare to accomodate the SOC requirements.
Signed-off-by: Jean-Christophe Dubois <[email protected]> --- Changes since v1: * not present on v1 Changes since v2: * not present on v2 Changes since v3: * not present on v3 Changes since v4: * not present on v4 Changes since v5: * not present on v5 Changes since v6: * not present on v6 Changes since v7: * Splited the i.MX serial emulator into a header file and a source file hw/char/imx_serial.c | 176 +++++++++++-------------------------------- include/hw/char/imx_serial.h | 104 +++++++++++++++++++++++++ 2 files changed, 149 insertions(+), 131 deletions(-) create mode 100644 include/hw/char/imx_serial.h diff --git a/hw/char/imx_serial.c b/hw/char/imx_serial.c index f3fbc77..8c2d071 100644 --- a/hw/char/imx_serial.c +++ b/hw/char/imx_serial.c @@ -4,6 +4,7 @@ * Copyright (c) 2008 OKL * Originally Written by Hans Jiang * Copyright (c) 2011 NICTA Pty Ltd. + * Updated by Jean-Christophe Dubois <[email protected]> * * This work is licensed under the terms of the GNU GPL, version 2 or later. * See the COPYING file in the top-level directory. @@ -17,16 +18,14 @@ * is a real serial device. */ -#include "hw/hw.h" -#include "hw/sysbus.h" +#include "hw/char/imx_serial.h" #include "sysemu/sysemu.h" #include "sysemu/char.h" -#include "hw/arm/imx.h" //#define DEBUG_SERIAL 1 #ifdef DEBUG_SERIAL #define DPRINTF(fmt, args...) \ -do { printf("imx_serial: " fmt , ##args); } while (0) +do { printf("%s: " fmt , TYPE_IMX_SERIAL, ##args); } while (0) #else #define DPRINTF(fmt, args...) do {} while (0) #endif @@ -38,42 +37,13 @@ do { printf("imx_serial: " fmt , ##args); } while (0) //#define DEBUG_IMPLEMENTATION 1 #ifdef DEBUG_IMPLEMENTATION # define IPRINTF(fmt, args...) \ - do { fprintf(stderr, "imx_serial: " fmt, ##args); } while (0) + do { fprintf(stderr, "%s: " fmt, TYPE_IMX_SERIAL, ##args); } while (0) #else # define IPRINTF(fmt, args...) do {} while (0) #endif -#define TYPE_IMX_SERIAL "imx-serial" -#define IMX_SERIAL(obj) OBJECT_CHECK(IMXSerialState, (obj), TYPE_IMX_SERIAL) - -typedef struct IMXSerialState { - SysBusDevice parent_obj; - - MemoryRegion iomem; - int32_t readbuff; - - uint32_t usr1; - uint32_t usr2; - uint32_t ucr1; - uint32_t ucr2; - uint32_t uts1; - - /* - * The registers below are implemented just so that the - * guest OS sees what it has written - */ - uint32_t onems; - uint32_t ufcr; - uint32_t ubmr; - uint32_t ubrc; - uint32_t ucr3; - - qemu_irq irq; - CharDriverState *chr; -} IMXSerialState; - static const VMStateDescription vmstate_imx_serial = { - .name = "imx-serial", + .name = TYPE_IMX_SERIAL, .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { @@ -91,55 +61,6 @@ static const VMStateDescription vmstate_imx_serial = { }, }; - -#define URXD_CHARRDY (1<<15) /* character read is valid */ -#define URXD_ERR (1<<14) /* Character has error */ -#define URXD_BRK (1<<11) /* Break received */ - -#define USR1_PARTYER (1<<15) /* Parity Error */ -#define USR1_RTSS (1<<14) /* RTS pin status */ -#define USR1_TRDY (1<<13) /* Tx ready */ -#define USR1_RTSD (1<<12) /* RTS delta: pin changed state */ -#define USR1_ESCF (1<<11) /* Escape sequence interrupt */ -#define USR1_FRAMERR (1<<10) /* Framing error */ -#define USR1_RRDY (1<<9) /* receiver ready */ -#define USR1_AGTIM (1<<8) /* Aging timer interrupt */ -#define USR1_DTRD (1<<7) /* DTR changed */ -#define USR1_RXDS (1<<6) /* Receiver is idle */ -#define USR1_AIRINT (1<<5) /* Aysnch IR interrupt */ -#define USR1_AWAKE (1<<4) /* Falling edge detected on RXd pin */ - -#define USR2_ADET (1<<15) /* Autobaud complete */ -#define USR2_TXFE (1<<14) /* Transmit FIFO empty */ -#define USR2_DTRF (1<<13) /* DTR/DSR transition */ -#define USR2_IDLE (1<<12) /* UART has been idle for too long */ -#define USR2_ACST (1<<11) /* Autobaud counter stopped */ -#define USR2_RIDELT (1<<10) /* Ring Indicator delta */ -#define USR2_RIIN (1<<9) /* Ring Indicator Input */ -#define USR2_IRINT (1<<8) /* Serial Infrared Interrupt */ -#define USR2_WAKE (1<<7) /* Start bit detected */ -#define USR2_DCDDELT (1<<6) /* Data Carrier Detect delta */ -#define USR2_DCDIN (1<<5) /* Data Carrier Detect Input */ -#define USR2_RTSF (1<<4) /* RTS transition */ -#define USR2_TXDC (1<<3) /* Transmission complete */ -#define USR2_BRCD (1<<2) /* Break condition detected */ -#define USR2_ORE (1<<1) /* Overrun error */ -#define USR2_RDR (1<<0) /* Receive data ready */ - -#define UCR1_TRDYEN (1<<13) /* Tx Ready Interrupt Enable */ -#define UCR1_RRDYEN (1<<9) /* Rx Ready Interrupt Enable */ -#define UCR1_TXMPTYEN (1<<6) /* Tx Empty Interrupt Enable */ -#define UCR1_UARTEN (1<<0) /* UART Enable */ - -#define UCR2_TXEN (1<<2) /* Transmitter enable */ -#define UCR2_RXEN (1<<1) /* Receiver enable */ -#define UCR2_SRST (1<<0) /* Reset complete */ - -#define UTS1_TXEMPTY (1<<6) -#define UTS1_RXEMPTY (1<<5) -#define UTS1_TXFULL (1<<4) -#define UTS1_RXFULL (1<<3) - static void imx_update(IMXSerialState *s) { uint32_t flags; @@ -242,13 +163,13 @@ static uint64_t imx_serial_read(void *opaque, hwaddr offset, return 0x0; /* TODO */ default: - IPRINTF("imx_serial_read: bad offset: 0x%x\n", (int)offset); + IPRINTF("%s: bad offset: 0x%x\n", __func__, (int)offset); return 0; } } static void imx_serial_write(void *opaque, hwaddr offset, - uint64_t value, unsigned size) + uint64_t value, unsigned size) { IMXSerialState *s = (IMXSerialState *)opaque; unsigned char ch; @@ -298,25 +219,25 @@ static void imx_serial_write(void *opaque, hwaddr offset, case 0x25: /* USR1 */ value &= USR1_AWAKE | USR1_AIRINT | USR1_DTRD | USR1_AGTIM | - USR1_FRAMERR | USR1_ESCF | USR1_RTSD | USR1_PARTYER; + USR1_FRAMERR | USR1_ESCF | USR1_RTSD | USR1_PARTYER; s->usr1 &= ~value; break; case 0x26: /* USR2 */ - /* - * Writing 1 to some bits clears them; all other - * values are ignored - */ + /* + * Writing 1 to some bits clears them; all other + * values are ignored + */ value &= USR2_ADET | USR2_DTRF | USR2_IDLE | USR2_ACST | - USR2_RIDELT | USR2_IRINT | USR2_WAKE | - USR2_DCDDELT | USR2_RTSF | USR2_BRCD | USR2_ORE; + USR2_RIDELT | USR2_IRINT | USR2_WAKE | + USR2_DCDDELT | USR2_RTSF | USR2_BRCD | USR2_ORE; s->usr2 &= ~value; break; - /* - * Linux expects to see what it writes to these registers - * We don't currently alter the baud rate - */ + /* + * Linux expects to see what it writes to these registers + * We don't currently alter the baud rate + */ case 0x29: /* UBIR */ s->ubrc = value & 0xffff; break; @@ -344,7 +265,7 @@ static void imx_serial_write(void *opaque, hwaddr offset, break; default: - IPRINTF("imx_serial_write: Bad offset 0x%x\n", (int)offset); + IPRINTF("%s: Bad offset 0x%x\n", __func__, (int)offset); } } @@ -377,22 +298,18 @@ static void imx_event(void *opaque, int event) } } - static const struct MemoryRegionOps imx_serial_ops = { .read = imx_serial_read, .write = imx_serial_write, .endianness = DEVICE_NATIVE_ENDIAN, }; -static int imx_serial_init(SysBusDevice *dev) +static void imx_serial_realize(DeviceState *dev, Error **errp) { IMXSerialState *s = IMX_SERIAL(dev); - - memory_region_init_io(&s->iomem, OBJECT(s), &imx_serial_ops, s, - "imx-serial", 0x1000); - sysbus_init_mmio(dev, &s->iomem); - sysbus_init_irq(dev, &s->irq); + /* FIXME use a qdev chardev prop instead of qemu_char_get_next_serial() */ + s->chr = qemu_char_get_next_serial(); if (s->chr) { qemu_chr_add_handlers(s->chr, imx_can_receive, imx_receive, @@ -401,45 +318,42 @@ static int imx_serial_init(SysBusDevice *dev) DPRINTF("No char dev for uart at 0x%lx\n", (unsigned long)s->iomem.ram_addr); } +} - return 0; +static void imx_serial_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + IMXSerialState *s = IMX_SERIAL(obj); + + memory_region_init_io(&s->iomem, obj, &imx_serial_ops, s, + TYPE_IMX_SERIAL, 0x1000); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq); } void imx_serial_create(int uart, const hwaddr addr, qemu_irq irq) { DeviceState *dev; SysBusDevice *bus; - CharDriverState *chr; - const char chr_name[] = "serial"; - char label[ARRAY_SIZE(chr_name) + 1]; - - dev = qdev_create(NULL, TYPE_IMX_SERIAL); if (uart >= MAX_SERIAL_PORTS) { hw_error("Cannot assign uart %d: QEMU supports only %d ports\n", uart, MAX_SERIAL_PORTS); } - chr = serial_hds[uart]; - if (!chr) { - snprintf(label, ARRAY_SIZE(label), "%s%d", chr_name, uart); - chr = qemu_chr_new(label, "null", NULL); - if (!(chr)) { - hw_error("Can't assign serial port to imx-uart%d.\n", uart); - } - } - qdev_prop_set_chr(dev, "chardev", chr); + dev = qdev_create(NULL, TYPE_IMX_SERIAL); + bus = SYS_BUS_DEVICE(dev); qdev_init_nofail(dev); + if (addr != (hwaddr)-1) { sysbus_mmio_map(bus, 0, addr); } - sysbus_connect_irq(bus, 0, irq); + sysbus_connect_irq(bus, 0, irq); } - -static Property imx32_serial_properties[] = { +static Property imx_serial_properties[] = { DEFINE_PROP_CHR("chardev", IMXSerialState, chr), DEFINE_PROP_END_OF_LIST(), }; @@ -447,21 +361,21 @@ static Property imx32_serial_properties[] = { static void imx_serial_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); - SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); - k->init = imx_serial_init; + dc->realize = imx_serial_realize; dc->vmsd = &vmstate_imx_serial; dc->reset = imx_serial_reset_at_boot; - set_bit(DEVICE_CATEGORY_INPUT, dc->categories); dc->desc = "i.MX series UART"; - dc->props = imx32_serial_properties; + dc->props = imx_serial_properties; + set_bit(DEVICE_CATEGORY_INPUT, dc->categories); } static const TypeInfo imx_serial_info = { - .name = TYPE_IMX_SERIAL, - .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(IMXSerialState), - .class_init = imx_serial_class_init, + .name = TYPE_IMX_SERIAL, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IMXSerialState), + .instance_init = imx_serial_init, + .class_init = imx_serial_class_init, }; static void imx_serial_register_types(void) diff --git a/include/hw/char/imx_serial.h b/include/hw/char/imx_serial.h new file mode 100644 index 0000000..dba0cbb --- /dev/null +++ b/include/hw/char/imx_serial.h @@ -0,0 +1,104 @@ +/* + * Device model for i.MX UART + * + * Copyright (c) 2008 OKL + * Originally Written by Hans Jiang + * Copyright (c) 2011 NICTA Pty Ltd. + * Updated by Jean-Christophe Dubois <[email protected]> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef IMX_SERIAL_H +#define IMX_SERIAL_H + +#include "hw/sysbus.h" + +#define TYPE_IMX_SERIAL "imx.serial" +#define IMX_SERIAL(obj) OBJECT_CHECK(IMXSerialState, (obj), TYPE_IMX_SERIAL) + +#define URXD_CHARRDY (1<<15) /* character read is valid */ +#define URXD_ERR (1<<14) /* Character has error */ +#define URXD_BRK (1<<11) /* Break received */ + +#define USR1_PARTYER (1<<15) /* Parity Error */ +#define USR1_RTSS (1<<14) /* RTS pin status */ +#define USR1_TRDY (1<<13) /* Tx ready */ +#define USR1_RTSD (1<<12) /* RTS delta: pin changed state */ +#define USR1_ESCF (1<<11) /* Escape sequence interrupt */ +#define USR1_FRAMERR (1<<10) /* Framing error */ +#define USR1_RRDY (1<<9) /* receiver ready */ +#define USR1_AGTIM (1<<8) /* Aging timer interrupt */ +#define USR1_DTRD (1<<7) /* DTR changed */ +#define USR1_RXDS (1<<6) /* Receiver is idle */ +#define USR1_AIRINT (1<<5) /* Aysnch IR interrupt */ +#define USR1_AWAKE (1<<4) /* Falling edge detected on RXd pin */ + +#define USR2_ADET (1<<15) /* Autobaud complete */ +#define USR2_TXFE (1<<14) /* Transmit FIFO empty */ +#define USR2_DTRF (1<<13) /* DTR/DSR transition */ +#define USR2_IDLE (1<<12) /* UART has been idle for too long */ +#define USR2_ACST (1<<11) /* Autobaud counter stopped */ +#define USR2_RIDELT (1<<10) /* Ring Indicator delta */ +#define USR2_RIIN (1<<9) /* Ring Indicator Input */ +#define USR2_IRINT (1<<8) /* Serial Infrared Interrupt */ +#define USR2_WAKE (1<<7) /* Start bit detected */ +#define USR2_DCDDELT (1<<6) /* Data Carrier Detect delta */ +#define USR2_DCDIN (1<<5) /* Data Carrier Detect Input */ +#define USR2_RTSF (1<<4) /* RTS transition */ +#define USR2_TXDC (1<<3) /* Transmission complete */ +#define USR2_BRCD (1<<2) /* Break condition detected */ +#define USR2_ORE (1<<1) /* Overrun error */ +#define USR2_RDR (1<<0) /* Receive data ready */ + +#define UCR1_TRDYEN (1<<13) /* Tx Ready Interrupt Enable */ +#define UCR1_RRDYEN (1<<9) /* Rx Ready Interrupt Enable */ +#define UCR1_TXMPTYEN (1<<6) /* Tx Empty Interrupt Enable */ +#define UCR1_UARTEN (1<<0) /* UART Enable */ + +#define UCR2_TXEN (1<<2) /* Transmitter enable */ +#define UCR2_RXEN (1<<1) /* Receiver enable */ +#define UCR2_SRST (1<<0) /* Reset complete */ + +#define UTS1_TXEMPTY (1<<6) +#define UTS1_RXEMPTY (1<<5) +#define UTS1_TXFULL (1<<4) +#define UTS1_RXFULL (1<<3) + +typedef struct IMXSerialState { + /* Private */ + SysBusDevice parent_obj; + + /* Public */ + MemoryRegion iomem; + int32_t readbuff; + + uint32_t usr1; + uint32_t usr2; + uint32_t ucr1; + uint32_t ucr2; + uint32_t uts1; + + /* + * The registers below are implemented just so that the + * guest OS sees what it has written + */ + uint32_t onems; + uint32_t ufcr; + uint32_t ubmr; + uint32_t ubrc; + uint32_t ucr3; + + qemu_irq irq; + CharDriverState *chr; +} IMXSerialState; + +void imx_serial_create(int uart, const hwaddr addr, qemu_irq irq); + +#endif -- 2.1.4
