On Mon, 2 Feb 2026, Chad Jablonski wrote:
Pixman requires stride in words. So over the course of the ati_2d_blt
function both src and dst stride were mutated before being passed to
pixman and then back afterwards.
This creates local variables holding src and dst stride in words
avoiding the potentially confusing mutation.
Originally we had pixman only so storing it the way that needs it made
sense. Then we realized that pixman can fail (e.g. on macOS ARM it had no
implementation so just returned error) and later pixman was also made
optional dependency in QEMU so fallbacks were added but I did not change
original just added locals for the fallback. This could now be cleaned up
as you propose.
Signed-off-by: Chad Jablonski <[email protected]>
---
hw/display/ati_2d.c | 43 +++++++++++++++++++++++--------------------
1 file changed, 23 insertions(+), 20 deletions(-)
diff --git a/hw/display/ati_2d.c b/hw/display/ati_2d.c
index 5d24d11d7a..f6c65ef3cc 100644
--- a/hw/display/ati_2d.c
+++ b/hw/display/ati_2d.c
@@ -86,6 +86,7 @@ void ati_2d_blt(ATIVGAState *s)
dst_bits += s->regs.crtc_offset & 0x07ffffff;
dst_stride *= bpp;
}
+ int dst_stride_words = dst_stride / sizeof(uint32_t);
uint8_t *end = s->vga.vram_ptr + s->vga.vram_size;
if (dst_x > 0x3fff || dst_y > 0x3fff || dst_bits >= end
|| dst_bits + dst_x
@@ -119,6 +120,7 @@ void ati_2d_blt(ATIVGAState *s)
src_bits += s->regs.crtc_offset & 0x07ffffff;
src_stride *= bpp;
}
+ int src_stride_words = src_stride / sizeof(uint32_t);
if (src_x > 0x3fff || src_y > 0x3fff || src_bits >= end
|| src_bits + src_x
+ (src_y + s->regs.dst_height) * src_stride >= end) {
@@ -126,18 +128,18 @@ void ati_2d_blt(ATIVGAState *s)
return;
}
- src_stride /= sizeof(uint32_t);
- dst_stride /= sizeof(uint32_t);
DPRINTF("pixman_blt(%p, %p, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d)\n",
- src_bits, dst_bits, src_stride, dst_stride, bpp, bpp,
- src_x, src_y, dst_x, dst_y,
+ src_bits, dst_bits,
+ src_stride_words, dst_stride_words,
+ bpp, bpp, src_x, src_y, dst_x, dst_y,
s->regs.dst_width, s->regs.dst_height);
#ifdef CONFIG_PIXMAN
if ((s->use_pixman & BIT(1)) &&
s->regs.dp_cntl & DST_X_LEFT_TO_RIGHT &&
s->regs.dp_cntl & DST_Y_TOP_TO_BOTTOM) {
fallback = !pixman_blt((uint32_t *)src_bits, (uint32_t *)dst_bits,
- src_stride, dst_stride, bpp, bpp,
+ src_stride_words, dst_stride_words,
+ bpp, bpp,
src_x, src_y, dst_x, dst_y,
No extra lines please, I like more lines to fit on one screen for easier
reading without scrolling back and forth which I think is more important
than grouping variables on one line so keep it vertically short and change
it to
bpp, bpp, src_x, src_y, dst_x, dst_y,
now to avoid adding extra lines. Same in above DPRINTF and below in
similar pixman_blt calls.
s->regs.dst_width, s->regs.dst_height);
} else if (s->use_pixman & BIT(1)) {
@@ -147,12 +149,14 @@ void ati_2d_blt(ATIVGAState *s)
uint32_t *tmp = g_malloc(tmp_stride * sizeof(uint32_t) *
s->regs.dst_height);
fallback = !pixman_blt((uint32_t *)src_bits, tmp,
- src_stride, tmp_stride, bpp, bpp,
+ src_stride_words, tmp_stride,
+ bpp, bpp,
src_x, src_y, 0, 0,
s->regs.dst_width, s->regs.dst_height);
if (!fallback) {
fallback = !pixman_blt(tmp, (uint32_t *)dst_bits,
- tmp_stride, dst_stride, bpp, bpp,
+ tmp_stride, dst_stride_words,
+ bpp, bpp,
0, 0, dst_x, dst_y,
s->regs.dst_width, s->regs.dst_height);
}
@@ -164,18 +168,17 @@ void ati_2d_blt(ATIVGAState *s)
}
if (fallback) {
unsigned int y, i, j, bypp = bpp / 8;
- unsigned int src_pitch = src_stride * sizeof(uint32_t);
- unsigned int dst_pitch = dst_stride * sizeof(uint32_t);
-
for (y = 0; y < s->regs.dst_height; y++) {
i = dst_x * bypp;
j = src_x * bypp;
if (s->regs.dp_cntl & DST_Y_TOP_TO_BOTTOM) {
- i += (dst_y + y) * dst_pitch;
- j += (src_y + y) * src_pitch;
+ i += (dst_y + y) * dst_stride;
+ j += (src_y + y) * src_stride;
} else {
- i += (dst_y + s->regs.dst_height - 1 - y) * dst_pitch;
- j += (src_y + s->regs.dst_height - 1 - y) * src_pitch;
+ i += (dst_y + s->regs.dst_height - 1 - y)
+ * dst_stride;
+ j += (src_y + s->regs.dst_height - 1 - y)
+ * src_stride;
Here too as long as it fits the 80 columnt limit.
}
memmove(&dst_bits[i], &src_bits[j], s->regs.dst_width * bypp);
}
@@ -202,21 +205,21 @@ void ati_2d_blt(ATIVGAState *s)
break;
}
- dst_stride /= sizeof(uint32_t);
DPRINTF("pixman_fill(%p, %d, %d, %d, %d, %d, %d, %x)\n",
- dst_bits, dst_stride, bpp, dst_x, dst_y,
+ dst_bits, dst_stride_words, bpp,
+ dst_x, dst_y,
Likewise.
s->regs.dst_width, s->regs.dst_height, filler);
#ifdef CONFIG_PIXMAN
if (!(s->use_pixman & BIT(0)) ||
- !pixman_fill((uint32_t *)dst_bits, dst_stride, bpp, dst_x, dst_y,
- s->regs.dst_width, s->regs.dst_height, filler))
+ !pixman_fill((uint32_t *)dst_bits, dst_stride_words,
+ bpp, dst_x, dst_y,
+ s->regs.dst_width, s->regs.dst_height, filler))
Written as
!pixman_fill((uint32_t *)dst_bits, dst_stride_words, bpp, dst_x,
dst_y, s->regs.dst_width, s->regs.dst_height, filler))
I think would fit in 80 chars.
Regards,
BALATON Zoltan
#endif
{
/* fallback when pixman failed or we don't want to call it */
unsigned int x, y, i, bypp = bpp / 8;
- unsigned int dst_pitch = dst_stride * sizeof(uint32_t);
for (y = 0; y < s->regs.dst_height; y++) {
- i = dst_x * bypp + (dst_y + y) * dst_pitch;
+ i = dst_x * bypp + (dst_y + y) * dst_stride;
for (x = 0; x < s->regs.dst_width; x++, i += bypp) {
stn_he_p(&dst_bits[i], bypp, filler);
}
