On Mon, Sep 22, 2025 at 02:58:38PM +0200, Juraj Marcin wrote: > Hi Fabiano, > > On 2025-09-19 13:46, Fabiano Rosas wrote: > > Juraj Marcin <[email protected]> writes: > > > > Hi Juraj, > > > > Good patch, nice use of migrate_has_failed() > > Thanks! > > > > > > From: Juraj Marcin <[email protected]> > > > > > > Currently, there are two functions that are responsible for cleanup of > > > the incoming migration state. With successful precopy, it's the main > > > thread and with successful postcopy it's the listen thread. However, if > > > postcopy fails during in the device load, both functions will try to do > > > the cleanup. Moreover, when exit-on-error parameter was added, it was > > > applied only to precopy. > > > > > > > Someone could be relying in postcopy always exiting on error while > > explicitly setting exit-on-error=false for precopy and this patch would > > change the behavior incompatibly. Is this an issue? I'm willing to > > ignore it, but you guys know more about postcopy. > > Good question. When going through older patches where postcopy listen > thread and then where exit-on-error were implemented, it seemed more > like an overlook than intentional omission. However, it might be better > to not break any potential users of this, we could add another option, > "exit-on-postcopy-error" that would allow such handling if postscopy > failed unrecoverably. I've already talked about such option with > @jdenemar and he agreed with it.
The idea for postcopy ram is, it should never fail.. as failing should never be better than a pause. Block dirty bitmap might be different, though, when enabled separately. For postcopy-ram, qemu_loadvm_state_main() will in reality only receive RAM updates. It'll almost always trigger the postcopy_pause_incoming() path when anything fails. For pure block-dirty-bitmap-only styled postcopy: for this exit-on-error, I also don't think we should really "exit on errors", even if the flag is set. IIUC, it's not fatal to the VM if that failed, as described in: commit ee64722514fabcad2430982ade86180208f5be4f Author: Vladimir Sementsov-Ogievskiy <[email protected]> Date: Mon Jul 27 22:42:32 2020 +0300 migration/savevm: don't worry if bitmap migration postcopy failed ... And anyway, bitmaps postcopy is not prepared to be somehow recovered. The original idea instead is that if bitmaps postcopy failed, we just lose some bitmaps, which is not critical. So, on failure we just need to remove unfinished bitmaps and guest should continue execution on destination. Hence, exit here might be an overkill.. need block developers to double check, though.. > > > > > > This patch refactors common cleanup and exiting on error into a helper > > > function that can be started either from precopy or postcopy, reducing > > > the duplication. If the listen thread has been started (the postcopy > > > state is at least LISTENING), the listen thread is responsible for all > > > cleanup and exiting, otherwise it's the main thread's responsibility. > > > > Don't the BHs also run in the main thread? I'm not sure this sentence is > > accurate. > > Yeah, it is a bit inaccurate now that you mention it, BHs are indeed run > in the main thread. More accurate would to replace the main thread with > process incoming migration coroutine, that would precisely describe who > has the responsibility to call the cleanup. > > > > > > > > > Signed-off-by: Juraj Marcin <[email protected]> > > > --- > > > migration/migration.c | 64 ++++++++++++++++++++++++------------------- > > > migration/migration.h | 1 + > > > migration/savevm.c | 48 +++++++++++--------------------- > > > > Could someone act on the TODOs and move postcopy code into postcopy-ram? > > It's never too late to make things consistent. > > I can take a look. > > > > > > 3 files changed, 53 insertions(+), 60 deletions(-) > > > > > > diff --git a/migration/migration.c b/migration/migration.c > > > index 2c0b3a7229..7222e3de13 100644 > > > --- a/migration/migration.c > > > +++ b/migration/migration.c > > > @@ -442,9 +442,19 @@ void > > > migration_incoming_transport_cleanup(MigrationIncomingState *mis) > > > void migration_incoming_state_destroy(void) > > > { > > > struct MigrationIncomingState *mis = > > > migration_incoming_get_current(); > > > + PostcopyState ps = postcopy_state_get(); > > > > > > multifd_recv_cleanup(); > > > > > > + if (mis->have_listen_thread) { > > > + qemu_thread_join(&mis->listen_thread); > > > + mis->have_listen_thread = false; > > > + } > > > + > > > + if (ps != POSTCOPY_INCOMING_NONE) { > > > + postcopy_ram_incoming_cleanup(mis); > > > + } > > > + > > > /* > > > * RAM state cleanup needs to happen after multifd cleanup, because > > > * multifd threads can use some of its states (receivedmap). > > > @@ -809,6 +819,23 @@ static void qemu_start_incoming_migration(const char > > > *uri, bool has_channels, > > > cpr_state_close(); > > > } > > > > > > +void migration_incoming_finish(void) > > > +{ > > > + MigrationState *s = migrate_get_current(); > > > + MigrationIncomingState *mis = migration_incoming_get_current(); > > > + > > > + migration_incoming_state_destroy(); > > > + > > > + if (migration_has_failed(mis->state) && mis->exit_on_error) { > > > + WITH_QEMU_LOCK_GUARD(&s->error_mutex) { > > > + error_report_err(s->error); > > > + s->error = NULL; > > > + } > > > + > > > + exit(EXIT_FAILURE); > > > + } > > > +} > > > + > > > static void process_incoming_migration_bh(void *opaque) > > > { > > > MigrationIncomingState *mis = opaque; > > > @@ -861,7 +888,7 @@ static void process_incoming_migration_bh(void > > > *opaque) > > > */ > > > migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE, > > > MIGRATION_STATUS_COMPLETED); > > > - migration_incoming_state_destroy(); > > > + migration_incoming_finish(); > > > } > > > > > > static void coroutine_fn > > > @@ -888,23 +915,13 @@ process_incoming_migration_co(void *opaque) > > > > > > ps = postcopy_state_get(); > > > trace_process_incoming_migration_co_end(ret, ps); > > > - if (ps != POSTCOPY_INCOMING_NONE) { > > > - if (ps == POSTCOPY_INCOMING_ADVISE) { > > > - /* > > > - * Where a migration had postcopy enabled (and thus went to > > > advise) > > > - * but managed to complete within the precopy period, we can > > > use > > > - * the normal exit. > > > - */ > > > - postcopy_ram_incoming_cleanup(mis); > > > - } else if (ret >= 0) { > > > - /* > > > - * Postcopy was started, cleanup should happen at the end of > > > the > > > - * postcopy thread. > > > - */ > > > - trace_process_incoming_migration_co_postcopy_end_main(); > > > - goto out; > > > - } > > > - /* Else if something went wrong then just fall out of the normal > > > exit */ > > > + if (ps >= POSTCOPY_INCOMING_LISTENING) { > > > + /* > > > + * Postcopy was started, cleanup should happen at the end of the > > > + * postcopy thread. > > > + */ > > > + trace_process_incoming_migration_co_postcopy_end_main(); > > > + goto out; > > > } > > > > > > if (ret < 0) { > > > @@ -926,16 +943,7 @@ fail: > > > migrate_set_error(s, local_err); > > > error_free(local_err); > > > > > > - migration_incoming_state_destroy(); > > > - > > > - if (mis->exit_on_error) { > > > - WITH_QEMU_LOCK_GUARD(&s->error_mutex) { > > > - error_report_err(s->error); > > > - s->error = NULL; > > > - } > > > - > > > - exit(EXIT_FAILURE); > > > - } > > > + migration_incoming_finish(); > > > out: > > > /* Pairs with the refcount taken in qmp_migrate_incoming() */ > > > migrate_incoming_unref_outgoing_state(); > > > diff --git a/migration/migration.h b/migration/migration.h > > > index 2c2331f40d..67e3318467 100644 > > > --- a/migration/migration.h > > > +++ b/migration/migration.h > > > @@ -518,6 +518,7 @@ void migrate_set_state(MigrationStatus *state, > > > MigrationStatus old_state, > > > void migration_fd_process_incoming(QEMUFile *f); > > > void migration_ioc_process_incoming(QIOChannel *ioc, Error **errp); > > > void migration_incoming_process(void); > > > +void migration_incoming_finish(void); > > > > What about merging migration_incoming_state_destroy and > > migration_incoming_finish and pair all of this with migration_cleanup? > > > > static void migration_cleanup_bh(void *opaque) > > { > > migration_cleanup(opaque); > > } > > > > static void migration_incoming_cleanup_bh(void *opaque) > > { > > migration_incoming_cleanup(opaque); > > } > > Yes, it would pair well. I guess it would also solve Peter's nitpick > about the change in process_incoming_migration_bh() above. > > > > > > > bool migration_has_all_channels(void); > > > > > > diff --git a/migration/savevm.c b/migration/savevm.c > > > index fabbeb296a..d7eb416d48 100644 > > > --- a/migration/savevm.c > > > +++ b/migration/savevm.c > > > @@ -2069,6 +2069,11 @@ static int > > > loadvm_postcopy_ram_handle_discard(MigrationIncomingState *mis, > > > return 0; > > > } > > > > > > +static void postcopy_ram_listen_thread_bh(void *opaque) > > > +{ > > > + migration_incoming_finish(); > > > +} > > > + > > > /* > > > * Triggered by a postcopy_listen command; this thread takes over reading > > > * the input stream, leaving the main thread free to carry on loading > > > the rest > > > @@ -2122,52 +2127,31 @@ static void *postcopy_ram_listen_thread(void > > > *opaque) > > > "bitmaps may be lost, and present migrated > > > dirty " > > > "bitmaps are correctly migrated and valid.", > > > __func__, load_res); > > > - load_res = 0; /* prevent further exit() */ > > > } else { > > > error_report("%s: loadvm failed: %d", __func__, load_res); > > > migrate_set_state(&mis->state, > > > MIGRATION_STATUS_POSTCOPY_ACTIVE, > > > MIGRATION_STATUS_FAILED); > > > + goto out; > > > } > > > } > > > - if (load_res >= 0) { > > > - /* > > > - * This looks good, but it's possible that the device loading in > > > the > > > - * main thread hasn't finished yet, and so we might not be in > > > 'RUN' > > > - * state yet; wait for the end of the main thread. > > > - */ > > > - qemu_event_wait(&mis->main_thread_load_event); > > > - } > > > - postcopy_ram_incoming_cleanup(mis); > > > - > > > - if (load_res < 0) { > > > - /* > > > - * If something went wrong then we have a bad state so exit; > > > - * depending how far we got it might be possible at this point > > > - * to leave the guest running and fire MCEs for pages that never > > > - * arrived as a desperate recovery step. > > > - */ > > > - rcu_unregister_thread(); > > > - exit(EXIT_FAILURE); > > > - } > > > + /* > > > + * This looks good, but it's possible that the device loading in the > > > + * main thread hasn't finished yet, and so we might not be in 'RUN' > > > + * state yet; wait for the end of the main thread. > > > + */ > > > + qemu_event_wait(&mis->main_thread_load_event); PS: I didn't notice this change, looks like this may be better to be a separate patch when moving out of the if. Meanwhile, I don't think we set it right either, in qemu_loadvm_state(): qemu_event_set(&mis->main_thread_load_event); The problem is e.g. load_snapshot / qmp_xen_load_devices_state also set that event, even if there'll be no one to consume it.. not a huge deal, but maybe while moving it out of the if, we can also cleanup the set() side too, by moving the set() upper into process_incoming_migration_co(). > > > > > > migrate_set_state(&mis->state, MIGRATION_STATUS_POSTCOPY_ACTIVE, > > > MIGRATION_STATUS_COMPLETED); > > > - /* > > > - * If everything has worked fine, then the main thread has waited > > > - * for us to start, and we're the last use of the mis. > > > - * (If something broke then qemu will have to exit anyway since it's > > > - * got a bad migration state). > > > - */ > > > - bql_lock(); > > > - migration_incoming_state_destroy(); > > > - bql_unlock(); > > > > > > +out: > > > rcu_unregister_thread(); > > > - mis->have_listen_thread = false; > > > postcopy_state_set(POSTCOPY_INCOMING_END); > > > > > > object_unref(OBJECT(migr)); > > > > > > + migration_bh_schedule(postcopy_ram_listen_thread_bh, NULL); > > > > Better to schedule before the object_unref to ensure there's always > > someone holding a reference? > > True, I'll move it. Good point. Though I'm not sure moving it upper would help, because it'll be the BH that references the MigrationState*.. So maybe we could unref at the end of postcopy_ram_listen_thread_bh(). If so, we should add a comment on ref() / unref() saying how they're paired. > > > > > > + > > > return NULL; > > > } > > > > > > @@ -2217,7 +2201,7 @@ static int > > > loadvm_postcopy_handle_listen(MigrationIncomingState *mis) > > > mis->have_listen_thread = true; > > > postcopy_thread_create(mis, &mis->listen_thread, > > > MIGRATION_THREAD_DST_LISTEN, > > > - postcopy_ram_listen_thread, > > > QEMU_THREAD_DETACHED); > > > + postcopy_ram_listen_thread, > > > QEMU_THREAD_JOINABLE); > > > trace_loadvm_postcopy_handle_listen("return"); > > > > > > return 0; > > > -- Peter Xu
