+ Thomas
On 9/18/25 05:13, Jamin Lin wrote:
Extend the AST2600 functional tests with PCIe and network checks.
This patch introduces a new helper "do_ast2600_pcie_test()" that runs "lspci"
on the emulated system and verifies the presence of the expected PCIe devices:
- 80:00.0 Host bridge: ASPEED Technology, Inc. Device 2600
- 80:08.0 PCI bridge: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge
- 81:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network
Connection
To exercise the PCIe network device, the test adds:
-device e1000e,netdev=net1,bus=pcie.0
-netdev user,id=net1
and assigns an IP address to the interface, verifying it with `ip addr`.
Signed-off-by: Jamin Lin <[email protected]>
---
tests/functional/arm/test_aspeed_ast2600.py | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/tests/functional/arm/test_aspeed_ast2600.py
b/tests/functional/arm/test_aspeed_ast2600.py
index 87e3595584..a7d9b894fc 100755
--- a/tests/functional/arm/test_aspeed_ast2600.py
+++ b/tests/functional/arm/test_aspeed_ast2600.py
@@ -101,6 +101,23 @@ def test_arm_ast2600_evb_buildroot_tpm(self):
'https://github.com/AspeedTech-BMC/openbmc/releases/download/v09.07/ast2600-default-obmc.tar.gz',
'cb6c08595bcbba1672ce716b068ba4e48eda1ed9abe78a07b30392ba2278feba')
+ def do_ast2600_pcie_test(self):
+ exec_command_and_wait_for_pattern(self,
+ 'lspci -s 80:00.0',
+ '80:00.0 Host bridge: '
+ 'ASPEED Technology, Inc. Device 2600')
+ exec_command_and_wait_for_pattern(self,
+ 'lspci -s 80:08.0',
+ '80:08.0 PCI bridge: '
+ 'ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge')
+ exec_command_and_wait_for_pattern(self,
+ 'lspci -s 81:00.0',
+ '81:00.0 Ethernet controller: '
+ 'Intel Corporation 82574L Gigabit Network Connection')
+ exec_command_and_wait_for_pattern(self,
+ 'ip addr add 192.168.1.100/24 dev eth4 && ip addr',
+ 'inet 192.168.1.100/24 scope global eth4')
I think checking that the user netdev returned 'inet 10.0.2.15/24'
should be enough. It would mean that DHCP has worked and that MSI
were triggered. No need to assign a new IP address IMO.
+
def test_arm_ast2600_evb_sdk(self):
self.set_machine('ast2600-evb')
@@ -110,6 +127,8 @@ def test_arm_ast2600_evb_sdk(self):
'tmp105,bus=aspeed.i2c.bus.5,address=0x4d,id=tmp-test')
self.vm.add_args('-device',
'ds1338,bus=aspeed.i2c.bus.5,address=0x32')
+ self.vm.add_args('-device', 'e1000e,netdev=net1,bus=pcie.0')
+ self.vm.add_args('-netdev', 'user,id=net1')
you need to add
self.require_netdev('user')
Thanks,
C.
self.do_test_arm_aspeed_sdk_start(
self.scratch_file("ast2600-default", "image-bmc"))
@@ -135,6 +154,7 @@ def test_arm_ast2600_evb_sdk(self):
year = time.strftime("%Y")
exec_command_and_wait_for_pattern(self,
'/sbin/hwclock -f /dev/rtc1', year)
+ self.do_ast2600_pcie_test()
def test_arm_ast2600_otp_blockdev_device(self):
self.vm.set_machine("ast2600-evb")
