Hi Gustavo,
On 5/20/25 4:09 PM, Gustavo Romero wrote:
> Hi Eric,
>
> On 5/14/25 14:00, Eric Auger wrote:
>> gpex build_host_bridge_osc() and x86 originated
>> build_pci_host_bridge_osc_method() are mostly identical.
>>
>> In GPEX, SUPP is set to CDW2 but is not further used. CTRL
>> is same as Local0.
>>
>> So let gpex code reuse build_pci_host_bridge_osc_method()
>> and remove build_host_bridge_osc().
>>
>> Signed-off-by: Eric Auger <[email protected]>
>>
>> ---
>>
>> The DSDT diff is given below:
>> diff --git a/dsdt.dsl_before b/dsdt.dsl_after_osc_change
>> index 3224a56..fa7558e 100644
>> --- a/dsdt.dsl_before
>> +++ b/dsdt.dsl_after_osc_change
>> @@ -5,13 +5,13 @@
>> *
>> * Disassembling to symbolic ASL+ operators
>> *
>> - * Disassembly of dsdt.dat, Mon Apr 7 05:33:06 2025
>> + * Disassembly of dsdt.dat, Mon Apr 7 05:37:20 2025
>> *
>> * Original Table Header:
>> * Signature "DSDT"
>> - * Length 0x00001A4F (6735)
>> + * Length 0x00001A35 (6709)
>> * Revision 0x02
>> - * Checksum 0xBF
>> + * Checksum 0xDD
>> * OEM ID "BOCHS "
>> * OEM Table ID "BXPC "
>> * OEM Revision 0x00000001 (1)
>> @@ -1849,27 +1849,26 @@ DefinitionBlock ("", "DSDT", 2, "BOCHS ",
>> "BXPC ", 0x00000001)
>> {
>> CreateDWordField (Arg3, 0x04, CDW2)
>> CreateDWordField (Arg3, 0x08, CDW3)
>> - SUPP = CDW2 /* \_SB_.PCI0._OSC.CDW2 */
>> - CTRL = CDW3 /* \_SB_.PCI0._OSC.CDW3 */
>> - CTRL &= 0x1F
>> + Local0 = CDW3 /* \_SB_.PCI0._OSC.CDW3 */
>> + Local0 &= 0x1F
>> If ((Arg1 != One))
>> {
>> CDW1 |= 0x08
>> }
>>
>> - If ((CDW3 != CTRL))
>> + If ((CDW3 != Local0))
>> {
>> CDW1 |= 0x10
>> }
>>
>> - CDW3 = CTRL /* \_SB_.PCI0.CTRL */
>> - Return (Arg3)
>> + CDW3 = Local0
>> }
>> Else
>> {
>> CDW1 |= 0x04
>> - Return (Arg3)
>> }
>> +
>> + Return (Arg3)
>> }
>>
>> Method (_DSM, 4, NotSerialized) // _DSM:
>> Device-Specific Method
>
> The problem I face with diffs in the commit body is that tools like
> b4, which are
> based on git am, get very confused on how to handle it. I'm surprised
> nobody ever
> complained about it. I'm wondering if there is any catch on it,
> because I have to
> edit commits like this manually, removing the diff, to make it finally
> apply to
> the series. Anyways, do you mind at least removing the valid diff
> header, like:
>
>> diff --git a/dsdt.dsl_before b/dsdt.dsl_after_osc_change
>> index 3224a56..fa7558e 100644
>> --- a/dsdt.dsl_before
>> +++ b/dsdt.dsl_after_osc_change
>
> from the commit message so it doesn't confuse b4?
Thank you for reporting the issue. in tests/qtest/bios-tables-test.c it
is written at the top that we shall put the diffs in disasembled ACPI
content in the commit msg. I will look for previously landed patches and
see whether the current layout can be fixed.
Cheers
Eric
>
>
>> ---
>> hw/pci-host/gpex-acpi.c | 60 +++--------------------------------------
>> 1 file changed, 4 insertions(+), 56 deletions(-)
>>
>> diff --git a/hw/pci-host/gpex-acpi.c b/hw/pci-host/gpex-acpi.c
>> index f1ab30f3d5..98c9868c3f 100644
>> --- a/hw/pci-host/gpex-acpi.c
>> +++ b/hw/pci-host/gpex-acpi.c
>> @@ -50,60 +50,7 @@ static void acpi_dsdt_add_pci_route_table(Aml
>> *dev, uint32_t irq,
>> }
>> }
>> -static Aml *build_host_bridge_osc(bool enable_native_pcie_hotplug)
>> -{
>> - Aml *method, *UUID, *ifctx, *ifctx1, *elsectx;
>> -
>> - method = aml_method("_OSC", 4, AML_NOTSERIALIZED);
>> - aml_append(method,
>> - aml_create_dword_field(aml_arg(3), aml_int(0), "CDW1"));
>> -
>> - /* PCI Firmware Specification 3.0
>> - * 4.5.1. _OSC Interface for PCI Host Bridge Devices
>> - * The _OSC interface for a PCI/PCI-X/PCI Express hierarchy is
>> - * identified by the Universal Unique IDentifier (UUID)
>> - * 33DB4D5B-1FF7-401C-9657-7441C03DD766
>> - */
>> - UUID = aml_touuid("33DB4D5B-1FF7-401C-9657-7441C03DD766");
>> - ifctx = aml_if(aml_equal(aml_arg(0), UUID));
>> - aml_append(ifctx,
>> - aml_create_dword_field(aml_arg(3), aml_int(4), "CDW2"));
>> - aml_append(ifctx,
>> - aml_create_dword_field(aml_arg(3), aml_int(8), "CDW3"));
>> - aml_append(ifctx, aml_store(aml_name("CDW2"), aml_name("SUPP")));
>> - aml_append(ifctx, aml_store(aml_name("CDW3"), aml_name("CTRL")));
>> -
>> - /*
>> - * Allow OS control for SHPCHotplug, PME, AER, PCIeCapability,
>> - * and PCIeHotplug depending on enable_native_pcie_hotplug
>> - */
>> - aml_append(ifctx, aml_and(aml_name("CTRL"),
>> - aml_int(0x1E | (enable_native_pcie_hotplug ? 0x1 :
>> 0x0)),
>> - aml_name("CTRL")));
>> -
>> - ifctx1 = aml_if(aml_lnot(aml_equal(aml_arg(1), aml_int(0x1))));
>> - aml_append(ifctx1, aml_or(aml_name("CDW1"), aml_int(0x08),
>> - aml_name("CDW1")));
>> - aml_append(ifctx, ifctx1);
>> -
>> - ifctx1 = aml_if(aml_lnot(aml_equal(aml_name("CDW3"),
>> aml_name("CTRL"))));
>> - aml_append(ifctx1, aml_or(aml_name("CDW1"), aml_int(0x10),
>> - aml_name("CDW1")));
>> - aml_append(ifctx, ifctx1);
>> -
>> - aml_append(ifctx, aml_store(aml_name("CTRL"), aml_name("CDW3")));
>> - aml_append(ifctx, aml_return(aml_arg(3)));
>> - aml_append(method, ifctx);
>> -
>> - elsectx = aml_else();
>> - aml_append(elsectx, aml_or(aml_name("CDW1"), aml_int(4),
>> - aml_name("CDW1")));
>> - aml_append(elsectx, aml_return(aml_arg(3)));
>> - aml_append(method, elsectx);
>> - return method;
>> -}
>> -
>> -static Aml *build_host_bridge_dsm(void)
>> +static Aml *build_pci_host_bridge_dsm_method(void)
>> {
>> Aml *method = aml_method("_DSM", 4, AML_NOTSERIALIZED);
>> Aml *UUID, *ifctx, *ifctx1, *buf;
>> @@ -134,8 +81,9 @@ static void acpi_dsdt_add_host_bridge_methods(Aml
>> *dev,
>> aml_append(dev, aml_name_decl("SUPP", aml_int(0)));
>> aml_append(dev, aml_name_decl("CTRL", aml_int(0)));
>> /* Declare an _OSC (OS Control Handoff) method */
>> - aml_append(dev, build_host_bridge_osc(enable_native_pcie_hotplug));
>> - aml_append(dev, build_host_bridge_dsm());
>> + aml_append(dev,
>> +
>> build_pci_host_bridge_osc_method(enable_native_pcie_hotplug));
>> + aml_append(dev, build_pci_host_bridge_dsm_method());
>> }
>> void acpi_dsdt_add_gpex(Aml *scope, struct GPEXConfig *cfg)
>
> Otherwise:
>
> Reviewed-by: Gustavo Romero <[email protected]>
>
>
> Cheers,
> Gustavo
>
