If I stop the pulse daemon (systemctl --user mask pulseaudio.socket, systemctl --user stop pulseaudio) then start the daemon with pulseaudio -vvvvv or systemctl --user start pulseaudio everything works, the remap device remap-analog-surround-40 exists and is set as the default sink (no reboot).
I have not tried explicitly using the commands via pacmd - Ill see what happens. I have a feeling its something to do with profiles - but dont understand why the profiles seem to be activated after everything else and how to change this - well I dont understand profiles. On Sun, Dec 27, 2020 at 5:51 PM guest271314 <[email protected]> wrote: > What happens when you run the commands at terminal without using or > relying on default.pa or ~/.config/pulse? > > On Sun, Dec 27, 2020 at 9:40 AM David Osguthorpe < > [email protected]> wrote: > >> >> This is direct from the boot logs: >> >> default.pa file in ~/.config/pulse >> >> #!/usr/bin/pulseaudio -nF >> >> # >> >> >> .include /etc/pulse/default.pa >> >> >> .fail >> >> >> set-default-sink alsa_output.pci-0000_00_1f.3.analog-surround-40 >> >> >> load-module module-remap-sink sink_name=remap-analog-surround-40 >> master=alsa_output.pci-0000_00_1f.3.analog-surround-40 channels=4 >> channel_map=front-left,front-right,rear-left,rear-right >> master_channel_map=front-left,rear-left,front-right,rear-right remix=no >> >> >> >> ### Make some devices default >> >> #set-default-sink output >> >> set-default-sink remap-analog-surround-40 >> >> #set-default-source input >> >> >> >> syslog portion where fails to load: >> >> >> >> Dec 27 13:33:33 david-MacBookPro pulseaudio[1422]: Starting GLib main loop >> >> Dec 27 13:33:33 david-MacBookPro pulseaudio[1422]: Loaded >> "module-filter-heuristics" (index: #21; argument: ""). >> >> Dec 27 13:33:33 david-MacBookPro pulseaudio[1422]: Loaded >> "module-filter-apply" (index: #22; argument: ""). >> >> Dec 27 13:33:33 david-MacBookPro pulseaudio[1422]: Master sink not found >> >> Dec 27 13:33:33 david-MacBookPro pulseaudio[1422]: Failed to load module >> "module-remap-sink" (argument: "sink_name=remap-analog-surround-40 >> master=alsa_output.pci-0000_00_1f.3.analog-surround-40 channels=4 >> channel_map=front-left,front-right,rear-left,rear-right >> master_channel_map=front-left,rear-left,front-right,rear-right remix=no"): >> initialization failed. >> >> Dec 27 13:33:33 david-MacBookPro pulseaudio[1422]: Sink >> alsa_output.pci-0000_00_1f.3.analog-surround-40 does not exist. >> >> Dec 27 13:33:33 david-MacBookPro pulseaudio[1422]: Sink >> remap-analog-surround-40 does not exist. >> >> Dec 27 13:33:33 david-MacBookPro pulseaudio[1422]: Successfully connected >> to D-Bus session bus fd35a79135b7241371a4f2745fe88d2d as :1.8 >> >> >> >> syslog from same boot where analog-surround-40 is first mentioned: >> >> >> Dec 27 13:33:37 david-MacBookPro pulseaudio[1422]: Looking at profile >> output:analog-surround-40 >> >> Dec 27 13:33:37 david-MacBookPro pulseaudio[1422]: Checking for playback >> on Analogue Surround 4.0 (analog-surround-40) >> >> Dec 27 13:33:37 david-MacBookPro pulseaudio[1422]: Trying surround40:0 >> with SND_PCM_NO_AUTO_FORMAT ... >> >> Dec 27 13:33:37 david-MacBookPro pulseaudio[1422]: Managed to open >> surround40:0 >> >> Dec 27 13:33:37 david-MacBookPro pulseaudio[1422]: >> snd_pcm_hw_params_set_format(Signed 16 bit Little Endian) failed: Invalid >> argument >> >> Dec 27 13:33:37 david-MacBookPro pulseaudio[1422]: >> snd_pcm_hw_params_set_format(Signed 16 bit Big Endian) failed: Invalid >> argument >> >> Dec 27 13:33:37 david-MacBookPro pulseaudio[1422]: >> snd_pcm_hw_params_set_format(Float 32 bit Little Endian) failed: Invalid >> argument >> >> Dec 27 13:33:37 david-MacBookPro pulseaudio[1422]: >> snd_pcm_hw_params_set_format(Float 32 bit Big Endian) failed: Invalid >> argument >> >> Dec 27 13:33:37 david-MacBookPro pulseaudio[1422]: Maximum hw buffer size >> is 92 ms >> >> Dec 27 13:33:38 david-MacBookPro pulseaudio[1422]: Set buffer size first >> (to 4408 samples), period size second (to 1102 samples). >> >> Dec 27 13:33:38 david-MacBookPro pulseaudio[1422]: Device surround40:0 >> doesn't support sample format s16le, changed to s32le. >> >> Dec 27 13:33:38 david-MacBookPro pulseaudio[1422]: Profile >> output:analog-surround-40 supported. >> >> Dec 27 13:33:38 david-MacBookPro pulseaudio[1422]: Removing path >> 'analog-output' as it is a subset of 'analog-output-speaker'. >> >> >> >> analog-surround-40 is a valid setting for Sound output in the Settings >> dialog - and is set as the default output device. >> >> >> >> _______________________________________________ >> pulseaudio-discuss mailing list >> [email protected] >> https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss >> > _______________________________________________ > pulseaudio-discuss mailing list > [email protected] > https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss >
_______________________________________________ pulseaudio-discuss mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
