I have a Sony Vaio with PS2 touchpad that works great and only USB
ports.
If I connect USB mouse, it does not work.
lsmod shows that hid, usb-uhci and usbcore are loaded.
Funny though when rmmod usb-uhci and then insmod usb-uhci I get the
following from /var/log/messages
"
Jan 8 11:41:04 deepblue kernel: usb-uhci.c: $Revision: 1.275 $ time
13:44:31 Sep 4 2002
Jan 8 11:41:04 deepblue kernel: usb-uhci.c: High bandwidth mode
enabled
Jan 8 11:41:04 deepblue kernel: PCI: Found IRQ 10 for device 00:1f.2
Jan 8 11:41:04 deepblue kernel: IRQ routing conflict for 00:1f.2,
have irq 9, want irq 10
Jan 8 11:41:04 deepblue kernel: PCI: Setting latency timer of device
00:1f.2 to
64
Jan 8 11:41:04 deepblue kernel: usb-uhci.c: USB UHCI at I/O 0x1820,
IRQ 9
Jan 8 11:41:04 deepblue kernel: usb-uhci.c: Detected 2 ports
Jan 8 11:41:04 deepblue kernel: usb.c: new USB bus registered,
assigned bus number 1
Jan 8 11:41:04 deepblue kernel: hub.c: USB hub found
Jan 8 11:41:04 deepblue kernel: hub.c: 2 ports detected
Jan 8 11:41:04 deepblue kernel: PCI: Found IRQ 9 for device 00:1f.4
Jan 8 11:41:04 deepblue kernel: PCI: Setting latency timer of device
00:1f.4 to
64
Jan 8 11:41:04 deepblue kernel: usb-uhci.c: USB UHCI at I/O 0x2400,
IRQ 9
Jan 8 11:41:04 deepblue kernel: usb-uhci.c: Detected 2 ports
Jan 8 11:41:04 deepblue kernel: usb.c: new USB bus registered,
assigned bus number 2
Jan 8 11:41:04 deepblue kernel: hub.c: USB hub found
Jan 8 11:41:04 deepblue kernel: hub.c: 2 ports detected
Jan 8 11:41:04 deepblue kernel: usb-uhci.c: v1.275:USB Universal Host
Controller Interface driver
Jan 8 11:41:05 deepblue kernel: hub.c: USB new device connect on
bus1/2, assigned device number 2
Jan 8 11:41:08 deepblue /etc/hotplug/usb.agent: Setup usbcore for USB
product 0/0/0
Jan 8 11:41:09 deepblue last message repeated 3 times
Jan 8 11:41:12 deepblue kernel: usb-uhci.c: interrupt, status 2,
frame# 1507
Jan 8 11:41:13 deepblue kernel: input0: USB HID v1.10 Mouse [KYE
WebScroll] on usb1:2.0
Jan 8 11:41:16 deepblue kernel: usb_control/bulk_msg: timeout
Jan 8 11:41:16 deepblue last message repeated 3 times
Jan 8 11:41:17 deepblue /etc/hotplug/usb.agent: Setup hid for USB
product 458/18/100
Jan 8 11:41:17 deepblue kernel: usb_control/bulk_msg: timeout
Jan 8 11:41:17 deepblue last message repeated 5 times
Jan 8 11:41:17 deepblue /etc/hotplug/usb.agent: Setup mousedev for
USB product 458/18/100
Jan 8 11:41:17 deepblue kernel: usb_control/bulk_msg: timeout
"
Any ideas as to get the mouse working?
I have added the following to XF86Config to cater for the external
mouse:
In server layout
InputDevice "Mouse1" "SendCoreEvents"
And
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Device" "/dev/mouse"
Option "Protocol" "IMPS/2"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
I appreciate any comments
Thanks in advance
Nardus
_______________________________________________________________
http://www.webmail.co.za the South-African free email service
NetWiseGurus.Com Portal - Your Own Internet Business Today!
--
Psyche-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/psyche-list
