I have a couple of questions.. I'm kinda new to kernel hacking :-)
I have a MSI K7 MasterS motherboard, (see lspci SNIP#1 below), I'm
currently running a pretty much stock RH8.0 setup, with some stuff
upgraded to support current rawhide kernels
kernel-2.4.20-2.2 Thu Jan 2 14:36:39 2003
mkinitrd-3.4.33-1 Thu Jan 2 14:36:21 2003
kernel-pcmcia-cs-3.1.31-11 Thu Jan 2 14:36:21 2003
kudzu-0.99.83-1 Thu Jan 2 14:36:19 2003
hwdata-0.64-1 Thu Jan 2 14:36:18 2003
kernel-source-2.4.20-2.2 Thu Jan 2 14:28:36 2003
modutils-devel-2.4.22-1 Mon Dec 30 13:49:28 2002
modutils-2.4.22-1 Mon Dec 30 13:49:28 2002
kernel-2.4.18-19.8.0 Mon Dec 23 16:01:03 2002
I have been having problems with the IDE interface, especially when
using hdc=ide-scsi in grub.conf for my TDK VeloCD burner. I have learned
that this is pretty common with this Via chipset :(
Here's what might happen when, say, adding packages with
redhat-config-packages.....
CD-ROM locks up, eject button doesn't work, system at 100% CPU. Not
hung, but very very slow. See SNIP #2
kernel 2.4.20-2.2 doesn't boot at all.... :( It can't seem to load the
device driver modules, hence can't mount /proc or anything else and
panics. Stock Linus 2.4.20 kernel, same problem.
kernel 2.4.12-19.8.0 (my current kernel) seems to have problems in this
area too, see SNIP #3. It boots though. I'm writing this email on top of
it! :0
Anyone have any advice on how to proceed?
Adam
PS. RedHat employees. How does per-incident support cost for this kind
of "incident"???
SNIP #1
lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P]
System Controller (rev 13)
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] AGP
Bridge
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
(rev 40)
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus
Master
IDE (rev 06)
00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 16)
00:07.3 USB Controller: VIA Technologies, Inc. USB (rev 16)
00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev
40)
00:09.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado]
(rev 74)
00:0b.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
00:0f.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
00:0f.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
01:05.0 VGA compatible controller: nVidia Corporation NV15 [GeForce2
Ultra, Bladerunner] (rev a4)
SNIP #2
/var/log/messages:
Jan 2 13:55:25 blackbox kernel: Attached scsi CD-ROM sr0 at scsi2,
channel 0, id 0, lun 0
Jan 2 13:55:25 blackbox kernel: sr0: scsi3-mmc drive: 171x/40x writer
cd/rw xa/form2 cdda tray
Jan 2 13:55:27 blackbox kernel: cdrom: This disc doesn't have any
tracks I recognize!
Jan 2 13:56:08 blackbox su(pam_unix)[1222]: session opened for user
root by (uid=500)
Jan 2 13:59:58 blackbox userhelper: pam_timestamp: timestamp file
`/var/run/sudo/adam/tty1:root' is too old, disallowing access to
redhat-config-packages for
UID 500
Jan 2 14:00:06 blackbox kernel: parport0: PC-style at 0x378 [PCSPP,EPP]
Jan 2 14:00:06 blackbox kernel: parport_pc: Via 686A parallel port:
io=0x378
Jan 2 14:11:35 blackbox kernel: scsi : aborting command due to timeout
: pid 25143, scsi2, channel 0, id 0, lun 0 Test Unit Ready 00 00 00 00
00
Jan 2 14:11:35 blackbox kernel: hdc: irq timeout: status=0xd0 { Busy }
Jan 2 14:11:35 blackbox kernel: hdc: DMA disabled
Jan 2 14:11:35 blackbox kernel: hdc: ATAPI reset complete
Jan 2 14:11:35 blackbox kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 2 14:11:35 blackbox kernel: hdc: ATAPI reset complete
Jan 2 14:11:40 blackbox kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 2 14:11:40 blackbox kernel: hdc: status timeout: status=0xc0 { Busy
}
Jan 2 14:11:40 blackbox kernel: hdc: drive not ready for command
Jan 2 14:11:40 blackbox kernel: hdc: ATAPI reset complete
Jan 2 14:11:45 blackbox kernel: scsi : aborting command due to timeout
: pid 25164, scsi2, channel 0, id 0, lun 0 Test Unit Ready 00 00 00 00
00
Jan 2 14:11:45 blackbox kernel: SCSI host 2 abort (pid 25164) timed out
- resetting
Jan 2 14:11:45 blackbox kernel: SCSI bus is being reset for host 2
channel 0.
Jan 2 14:11:45 blackbox kernel: scsi : aborting command due to timeout
: pid 25164, scsi2, channel 0, id 0, lun 0 Test Unit Ready 00 00 00 00
00
Jan 2 14:11:45 blackbox kernel: SCSI host 2 abort (pid 25164) timed out
- resetting
Jan 2 14:11:45 blackbox kernel: SCSI bus is being reset for host 2
channel 0.
Jan 2 14:11:46 blackbox kernel: scsi : aborting command due to timeout
: pid 25164, scsi2, channel 0, id 0, lun 0 Test Unit Ready 00 00 00 00
00
Jan 2 14:11:46 blackbox kernel: SCSI host 2 abort (pid 25164) timed out
- resetting
Jan 2 14:11:46 blackbox kernel: SCSI bus is being reset for host 2
channel 0.
SNIP#3
/var/log/messages
Jan 3 08:51:50 blackbox kernel: SCSI subsystem driver Revision: 1.00
Jan 3 08:51:50 blackbox kernel: kmod: failed to exec /sbin/modprobe -s
-k scsi_hostadapter, errno = 2
Jan 3 08:51:50 blackbox kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI
SCSI HBA DRIVER, Rev 6.2.8
Jan 3 08:51:50 blackbox kernel: <Adaptec aic7899 Ultra160 SCSI
adapter>
Jan 3 08:51:50 blackbox kernel: aic7899: Ultra160 Wide Channel
A, SCSI Id=7, 32/253 SCBs
Jan 3 08:51:50 blackbox kernel:
Jan 3 08:51:50 blackbox kernel: scsi1 : Adaptec AIC7XXX EISA/VLB/PCI
SCSI HBA DRIVER, Rev 6.2.8
Jan 3 08:51:50 blackbox kernel: <Adaptec aic7899 Ultra160 SCSI
adapter>
Jan 3 08:51:50 blackbox kernel: aic7899: Ultra160 Wide Channel
B, SCSI Id=7, 32/253 SCBs
Jan 3 08:51:50 blackbox kernel:
--
Psyche-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/psyche-list
