Software version：
snmp_exporter-0.26.0.linux-amd64
OID Node Name: sensorName
OID: 1.3.6.1.4.1.2011.2.235.1.1.13.50.1.1
OID Node Name: sensorReading
OID: 1.3.6.1.4.1.2011.2.235.1.1.13.50.1.2
OID Node Name: sensorStatus
OID: 1.3.6.1.4.1.2011.2.235.1.1.13.50.1.9
There are 173 records in the single oid node traversal, many of which are
very mixed, and most of the values are na!
I want to specify the following oid node (Not all, just a screenshot of
part)
1.3.6.1.4.1.2011.2.235.1.1.13.50.1.2.17.67.80.85.49.32.68.84.83.0.0.0.0.0.0.0.0.0
1.3.6.1.4.1.2011.2.235.1.1.13.50.1.2.17.67.80.85.49.32.86.67.111.114.101.0.0.0.0.0.0.0
1.3.6.1.4.1.2011.2.235.1.1.13.50.1.2.17.67.80.85.50.32.68.84.83.0.0.0.0.0.0.0.0.0
1.3.6.1.4.1.2011.2.235.1.1.13.50.1.2.17.67.80.85.50.32.86.67.111.114.101.0.0.0.0.0.0.0
1.3.6.1.4.1.2011.2.235.1.1.13.50.1.2.17.80.83.49.32.84.101.109.112.0.0.0.0.0.0.0.0.0
1.3.6.1.4.1.2011.2.235.1.1.13.50.1.2.17.80.111.119.101.114.49.0.0.0.0.0.0.0.0.0.0.0
1.3.6.1.4.1.2011.2.235.1.1.13.50.1.2.17.80.83.50.32.84.101.109.112.0.0.0.0.0.0.0.0.0
1.3.6.1.4.1.2011.2.235.1.1.13.50.1.2.17.80.111.119.101.114.50.0.0.0.0.0.0.0.0.0.0.0
Note: All non-specified OID subsets are ignored, I only have the values
for the specified OIDs.
Finally, after compiling through generator.yml, I like to display this data
structure:
sensorName{sensorName="Inlet Temp",sensorReading="20",sensorStatus="ok"} 1
So how do you edit the generator.yml file so that the above requirements
can be achieved after compilation?
--
You received this message because you are subscribed to the Google Groups
"Prometheus Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/prometheus-users/4482234c-84d5-4460-8df1-b8971c8a7ca6n%40googlegroups.com.
