Hello, I want to use blackbox_exporter and http prober to login to an API. My goal is to do the login every 15s which could be
xx:yy:00 xx:yy:15 xx:yy:30 xx:yy:45 I could solve this with scrape_interval: 15s. But in addition I want to allow a scrape timeout of 30s which is longer than the scrape_timeout. If I run two blackbox_probes in parallel with scrape_interval: 30s and scrape_timeout: 30s this will work but both probes will start more or less at the same time. xx:yy:00 xx:yy:30 The idea behind tha is: In general the API response for login is very fast. For whatever reason sometimes it takes 30s or more. I do not want the probe to just fail after 15s but want to see and understand how long a login request takes. If I abort a long lasting request or do a parellel login this may work very fast. So it is probably not a problem with the API in general but with specific user session or other unknown circumstances. So I want many scrape intervals but the imeout sometimes needs to be higher OR I need several blackbox_probes which do not start at the same time but are spread equally. Any ideas? Is this possible with prometheus 2.48.1 and blackbox_exporter 0.24.0 ? -- You received this message because you are subscribed to the Google Groups "Prometheus Users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/prometheus-users/ef7dead8-d26e-48de-af2e-28e2919410e3n%40googlegroups.com.
