By default the C6220 have always shutdown automatically when the inlet temperature was too high for the C6220 systems that I have managed in the past. They will first throttle back the CPU speed and will also print a message to the IPMI log as well so if your monitoring system can monitor the ipmi log then you can get an alert from your normal monitoring system. They will also change the status LED from green to flashing orange on the front of the system. (Though, flashing orange can mean other issues as well like a bad fan module.)
-Adam Hough On Tue, Jul 12, 2016 at 9:21 AM, Antoine Migeon < [email protected]> wrote: > Thank you. > I should have asked earlier... > Antoine > > Antoine Migeon > > Centre de Calcul et Messageries > Pôle des Systèmes d'Information et des Usages du Numérique > Université de Bourgogne > > Tel : 03 80 39 52 70 > > Le 12/07/2016 17:12, [email protected] a écrit : > > Hi, > > > > To my recollection, this feature was never enabled for the command > line. If this is a large concern to you , you might be able to rig > something up with scripting; there are rich libraries available. If memory > serves, Perl::Mechanize is what I've used in the past. But I've never > tried to do what you're doing. > > > > good luck, > > > > Michael Stumpf > > Storage, Embedded Management > > Dell | PowerEdge Portfolio Sys Engr > > > > From: poweredgec-tools-bounces On Behalf Of Antoine Migeon > > Sent: Tuesday, July 12, 2016 10:07 AM > > To: poweredgec-tools <[email protected]> > > Subject: [Poweredgec-tools] pef alert > > > > Hello, > > > > I want to enable automatic shutdown of C6220 nodes when inlet > temperature is above critical threshold. > > > > I don't want to use the web interface to configure the platform event > filtering. > > I can enable the power off with pef-config utility (part of freeipmi) > for a specific event. > > > > My question is : how to enable "Global alerting" in command line ? > > > > In web ui, it is a simple checkbox : > > > > [ ] Global Alerting Enable Note: (This enables/disables both PEF > and email alerts). > > > > > > Antoine > > > > > > -- > > > > Antoine Migeon > > > > > > _______________________________________________ > Poweredgec-tools mailing list > [email protected] > https://lists.us.dell.com/mailman/listinfo/poweredgec-tools >
_______________________________________________ Poweredgec-tools mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/poweredgec-tools
