On 10/23/14 18:48, Sebastian Reitenbach wrote:
On Thursday, October 23, 2014 14:22 CEST, Fred <open...@crowsons.com> wrote:
On 10/22/14 19:11, Jasper Lievisse Adriaanse wrote:
Hi,
Are there any users left of of sysutils/libretto-config or sysutils/wdsetup ?
If so, anyone interested in taking maintainership? Otherwise I'd like to
remove these ports shortly.
Cheers,
Jasper
I've still got my Libretto 70CT - but it currently does not run anything
newer than 4.3 - my model only has 16 Mb of RAM and if the kernel is
bigger than 6 Mb - it fails to get to a login prompt following a
successful install.
I would be happy for this to go to the attic - if I get my Libretto
running current again - I might take maintainership and resubmit this port.
On my libretto 60 (32mb RAM), I run into ddb> when booting GENERIC after
installation.
I wonder if this is an issue of kernel size, or some other option in the KERNEL
that
breaks GENERIC on those machines.
I built an i386 RAMDISK kernel, and that booted at least into userland.
It then started to hang, when the box was trying to start rpc services.
I'm going to experiment a bit more with kernel options, differences between
GENERIC
and RAMDISK. But since I don't really know what's going on, this is more trial
and
error. If there are suggestions, what I might try first, I'm all ears ;)
Sebastian
booting hd0a:/bsd: 9699132+1067500 [72+403264+397640]=0xb08394
entry point at 0x200120
[ using 801388 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2014 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.6-current (GENERIC) #418: Thu Oct 23 01:22:05 MDT 2014
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 100 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8
real mem = 33189888 (31MB)
avail mem = 20418560 (19MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/09/97
apm0 at bios0: Power Management spec V1.2
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xe4000/0xc000
cpu0 at mainbus0: (uniprocessor)
cpu0: F00F bug workaround installed
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072
wsdisplay0 at vga0 mux 1: console (80x25, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <HITACHI_DK23AA-60>
wd0: 16-sector PIO, LBA, 5729MB, 11733120 sectors
wd0(wdc0:0:0): using BIOS timings
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl at sb0 not configured
wss0 at isa0 port 0x530/8 irq 10 drq 0: CS4231 or AD1845 (vers 4)
audio1 at wss0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536
pcic0 controller 0: <Intel 82365SL rev 1> has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
ep1 at pcmcia0 function 0 "3Com, 3C574-TX Fast EtherLink PC Card, A" port
0x340/32, irq 9: address 00:60:08:b3:f5:61
tqphy0 at ep1 phy 0: 78Q2120 10/100 PHY, rev. 3
pcmcia1 at pcic0 controller 0 socket 1
pcic0: irq 11, polling enabled
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
kernel: integer divide fault trap, code=0
Stopped at cpu_switchto+0x64: popl %ebx
ddb> trace
cpu_switchto(d0f13014,d0f13000,d0d0af18,d03bc36c,0) at cpu_switchto+0x64
(null)(102,0,0,0,0) at 0x1e414cea
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
23422 0 0 0 2 0x14200 crypto
15658 0 0 0 2 0x14200 pfpurge
27622 0 0 0 2 0x14200 pcic0,0,1
17307 0 0 0 2 0x14200 pcic0,0,0
3962 0 0 0 2 0x14200 apm0
27415 0 0 0 2 0x14200 systqmp
5795 0 0 0 2 0x14200 systq
10877 0 0 0 2 0x14200 syswq
7219 0 0 0 1 0x14200 idle0
25895 0 0 0 2 0x14200 kmthread
* 1 0 0 0 7 0 swapper
0 -1 0 0 3 0x10200 wdccmd swapper
This thread on marc - might be of interest - but it didn't help me:
http://marc.info/?t=127866774600001
