If cwm is your window manager, the mplayer fullscreen window gets
re-mapped to IconicState - you want a cwm past Dec 02.
On Sun, Dec 15, 2013 at 6:36 AM, Jan Stary <h...@stare.cz> wrote:
> This is mplayer-20130819p0 on a reasonably current i386 on a Lenovo R61
> (see full dmesg below). This is the newest package available.
>
> When playing any video with 'fs', the mplayer window appears,
> almost instantly disappears, and only the sound gets played.
> Perhaps the video too, but without me seeing it.
>
> It's not that the mplayer window is obsciured by some other window.
> This also happens when there are no other windows beside the xterm
> that I launched player from.
>
> Without 'fs', it plays just fine.
>
> This is happening after my last or pre-last update (Nov 30, Nov 04).
> Could this be the relatively new video stuff? Mind you:
>
> vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x0429 rev 0xa1
>
> $ mplayer -dvd-device /mnt/ dvd://1
> MPlayer SVN-r36426 (C) 2000-2013 MPlayer Team
>
> Playing dvd://1.
> libdvdread: Using libdvdcss version 1.2.13 for DVD access
> libdvdread: Couldn't find device name.
> There are 13 titles on this DVD.
> There are 1 angles in this DVD title.
> audio stream: 0 format: ac3 (stereo) language: unknown aid: 128.
> number of audio channels on disk: 1.
> subtitle ( sid ): 0 language: unknown
> number of subtitles on disk: 1
>
> MPEG-PS file format detected.
> VIDEO: MPEG2 720x576 (aspect 2) 25.000 fps 3000.0 kbps (375.0
> kbyte/s)
> [VO_XV] It seems there is no Xvideo support for your video card
> available.
> [VO_XV] Run 'xvinfo' to verify its Xv support and read
> [VO_XV] DOCS/HTML/en/video.html#xv!
> [VO_XV] See 'mplayer -vo help' for other (non-xv) video out drivers.
> [VO_XV] Try -vo x11.
> ==========================================================================
> Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
> libavcodec version 54.92.100 (external)
> Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2)
> ==========================================================================
> ==========================================================================
> Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
> AUDIO: 48000 Hz, 2 ch, floatle, 192.0 kbit/6.25% (ratio: 24000->384000)
> Selected audio codec: [ffac3] afm: ffmpeg (FFmpeg AC-3)
> ==========================================================================
> AO: [sndio] 48000Hz 2ch s16le (2 bytes per sample)
> Starting playback...
> [VD_FFMPEG] Trying pixfmt=0.
> [VD_FFMPEG] XVMC-accelerated MPEG-2.
> The selected video_out device is incompatible with this codec.
> Try appending the scale filter to your filter list,
> e.g. -vf spp,scale instead of -vf spp.
> [VD_FFMPEG] Trying pixfmt=1.
> [VD_FFMPEG] XVMC-accelerated MPEG-2.
> The selected video_out device is incompatible with this codec.
> Try appending the scale filter to your filter list,
> e.g. -vf spp,scale instead of -vf spp.
> Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
> VO: [x11] 720x576 => 768x576 Planar YV12 [fs]
> [swscaler @ 0x29a6aca0]using unscaled yuv420p -> bgra special converter
> [mpeg2video @ 0x270ca800]ac-tex damaged at 9 4
> [mpeg2video @ 0x270ca800]Warning MVs not available
> [mpeg2video @ 0x270ca800]concealing 1440 DC, 1440 AC, 1440 MV errors in
> I frame
> A: 2.3 V: 2.3 A-V: 0.012 ct: 0.047 53/ 53 18% 30% 1.0% 5 0
>
>
> The above is playing a DVD, but the same happens with anything else.
>
> Here is my .mplayer/config (unchanged for a long time):
>
> framedrop=yes
> nocache=yes
> fs=yes
> ontop=yes
> vo=xv,x11
>
> Without specifying the -vo
> (either in config, or on cmdline),
> mplayer doesn't start playing at all:
>
> $ mplayer -dvd-device /mnt/ dvd://1
> MPlayer SVN-r36426 (C) 2000-2013 MPlayer Team
>
> Playing dvd://1.
> libdvdread: Using libdvdcss version 1.2.13 for DVD access
> libdvdread: Couldn't find device name.
> There are 13 titles on this DVD.
> There are 1 angles in this DVD title.
> audio stream: 0 format: ac3 (stereo) language: unknown aid: 128.
> number of audio channels on disk: 1.
> subtitle ( sid ): 0 language: unknown
> number of subtitles on disk: 1
>
> MPEG-PS file format detected.
> VIDEO: MPEG2 720x576 (aspect 2) 25.000 fps 3000.0 kbps (375.0
> kbyte/s)
> [VO_XV] It seems there is no Xvideo support for your video card
> available.
> [VO_XV] Run 'xvinfo' to verify its Xv support and read
> [VO_XV] DOCS/HTML/en/video.html#xv!
> [VO_XV] See 'mplayer -vo help' for other (non-xv) video out drivers.
> [VO_XV] Try -vo x11.
>
> and nothing else happens, as Hatfield would say.
>
> At the same time, FFplay works just fine in full screen.
>
> Am I missing something?
>
> Jan
>
>
>
> OpenBSD 5.4-current (GENERIC.MP) #152: Sat Nov 30 00:50:11 MST 2013
> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz ("GenuineIntel" 686-class)
> 2.20 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF
> real mem = 1071894528 (1022MB)
> avail mem = 1042530304 (994MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 08/27/07, BIOS32 rev. 0 @ 0xfdc70,
> SMBIOS rev. 2.4 @ 0xe0010 (71 entries)
> bios0: vendor LENOVO version "7KET72WW (1.22 )" date 08/27/2007
> bios0: LENOVO 8918B8G
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT SSDT SSDT
> SSDT SSDT
> acpi0: wakeup devices LID_(S3) SLPB(S3) LURT(S3) DURT(S3) IGBE(S4) EXP0(S4)
> EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3)
> USB3(S3) USB4(S3) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpiec0 at acpi0
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 199MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz ("GenuineIntel" 686-class) 2
> GHz
> cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 2, remapped to apid 1
> acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 1 (AGP_)
> acpiprt2 at acpi0: bus 2 (EXP0)
> acpiprt3 at acpi0: bus 3 (EXP1)
> acpiprt4 at acpi0: bus 4 (EXP2)
> acpiprt5 at acpi0: bus 5 (EXP3)
> acpiprt6 at acpi0: bus 13 (EXP4)
> acpiprt7 at acpi0: bus 21 (PCI1)
> acpicpu0 at acpi0: C3, C2, C1, PSS
> acpicpu1 at acpi0: C3, C2, C1, PSS
> acpipwrres0 at acpi0: PUBS: resource for USB0, USB2, USB4, EHC0, EHC1
> acpitz0 at acpi0: critical temperature is 127 degC
> acpitz1 at acpi0: critical temperature is 100 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> acpibat0 at acpi0: BAT0 model "COMPATIBLE" serial 13920 type LION oem "SANYO"
> acpibat1 at acpi0: BAT1 not present
> acpiac0 at acpi0: AC unit online
> acpithinkpad0 at acpi0
> acpidock0 at acpi0: GDCK not docked (0)
> bios0: ROM list: 0xc0000/0xf000 0xcf000/0x1000 0xd0000/0x1000 0xe0000/0x10000!
> cpu0: Enhanced SpeedStep 1996 MHz: speeds: 2001, 2000, 1600, 1200, 800 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c
> ppb0 at pci0 dev 1 function 0 "Intel GM965 PCIE" rev 0x0c: apic 1 int 16
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x0429 rev 0xa1
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> em0 at pci0 dev 25 function 0 "Intel ICH8 IGP M" rev 0x03: msi, address
> 00:1a:6b:d4:5f:22
> uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 20
> uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 21
> ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 22
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: msi
> azalia0: codecs: Analog Devices AD1984, Conexant/0x2bfa, using Analog Devices
> AD1984
> audio0 at azalia0
> ppb1 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: apic 1 int 20
> pci2 at ppb1 bus 2
> ppb2 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03: apic 1 int 21
> pci3 at ppb2 bus 3
> iwn0 at pci3 dev 0 function 0 "Intel Wireless WiFi Link 4965" rev 0x61: msi,
> MIMO 2T3R, MoW2, address 00:13:e8:d2:4e:9b
> ppb3 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x03: apic 1 int 22
> pci4 at ppb3 bus 4
> ppb4 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x03: apic 1 int 23
> pci5 at ppb4 bus 5
> ppb5 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x03: apic 1 int 20
> pci6 at ppb5 bus 13
> uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 16
> uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 17
> uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 1 int 18
> ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 19
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb6 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
> pci7 at ppb6 bus 21
> cbb0 at pci7 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int 16
> "Ricoh 5C832 Firewire" rev 0x04 at pci7 dev 0 function 1 not configured
> sdhc0 at pci7 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 1 int 18
> sdmmc0 at sdhc0
> "Ricoh 5C843 MMC" rev 0x11 at pci7 dev 0 function 3 not configured
> "Ricoh 5C592 Memory Stick" rev 0x11 at pci7 dev 0 function 4 not configured
> "Ricoh 5C852 xD" rev 0x11 at pci7 dev 0 function 5 not configured
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 22 device 0 cacheline 0x0, lattimer 0xb0
> pcmcia0 at cardslot0
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x03: PM disabled
> pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA, channel
> 0 configured to compatibility, channel 1 configured to compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GMA-4082N, PX07> ATAPI
> 5/cdrom removable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 ignored (disabled)
> ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: msi, AHCI 1.1
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, HITACHI HTS54161, SB4I> SCSI3 0/direct
> fixed naa.5000cca553d9c785
> sd0: 152627MB, 512 bytes/sector, 312581808 sectors
> ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic 1 int 23
> iic0 at ichiic0
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb6 at uhci4: USB revision 1.0
> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pms0: ALPS Dualpoint, version 0x7301
> wsmouse1 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> aps0 at isa0 port 0x1600/31
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> ugen0 at uhub2 port 2 "TouchStrip Fingerprint Sensor" rev 1.00/0.01 addr 2
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on sd0a (603a3f894caa2b45.a) swap on sd0b dump on sd0b
> iwn0: radio is disabled by hardware switch
> iwn0: radio is disabled by hardware switch
> iwn0: radio is disabled by hardware switch
> softraid0: incorrect key or passphrase
> sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
> sd1: 28667MB, 512 bytes/sector, 58710448 sectors
>
