On 2012-03-02 16:19:38, David Coppa <dco...@gmail.com> wrote:
>
> http://pbot.rmdir.de/fa0e34c8bfab313978f7f9088ce30e8c
>
> Thanks for the tip,
> David
>
I tested it for about 5 minutes before having to roll back to
0.92.0. The problems I saw were as follows.
Trying to set ports/games/wesnoth to full-screen mode via its
in-game option started a weird loop where the screen would
continuously resize from 1600x1200 (my default) to 1024x768 (how
I've set Wesnoth's full-screen mode) and then back to 1600x1200 (and
then to 1024x768 etc.).
It took about a second or two between switches. The first time it
happened I was quick (or lucky) enough to untick the full-screen
checkbox and the screen went back to 1600x1200. The second time
I ended up switching to a console terminal and pkilling wesnoth.
The screen was left in 1024x768 mode and had to be set back to
normal via xrandr.
I've had no problems switching from windowed to full-screen mode
before. It's always seamlessly changed to full-screen mode and the
lower resolution and then back again with no problems.
Another issue is that I have ctrl+u mapped to spawn an xterm. In
0.95.2 a single press of ctrl+u would open two xterms instead of a
single one.
One final issue I saw was that despite the fact that I have all
animations turned off in WindowMaker's preferences app,
double-clicking window titles "rolled" the window up and down
smoothly instead of instantly {dis,re}appearing.
I'm very happy to see WindowMaker getting active development and
that you've taken the time to update the port, but with the
full-screen bug and the double-spawning of xterms I was not able
to use the new version and had to roll back to 0.92.
If there's any more information I can provide to help, I would
very much like to see an updated version of WindowMaker in the
ports tree.
All packages are up-to-date with regards to the snapshot I'm
running.
dmesg follows. (I know it's a bit old and does not have the rthread
changes. I've been waiting for a new snapshot to be released. I
can retest as soon as a new snap is released if you think it will
make a difference.)
--
Bryan
OpenBSD 5.1 (GENERIC) #157: Fri Feb 10 11:07:41 MST 2012
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) Processor ("AuthenticAMD" 686-class, 256KB L2 cache) 1.01
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,MMXX,3DNOW2,3DNOW
real mem = 804753408 (767MB)
avail mem = 781492224 (745MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/23/02, BIOS32 rev. 0 @ 0xf0f80, SMBIOS
rev. 2.3 @ 0xf2940 (49 entries)
bios0: vendor Award Software, Inc. version "ASUS A7V ACPI BIOS Revision 1011"
date 04/23/2002
bios0: ASUSTeK Computer INC. <A7V>
apm0 at bios0: Power Management spec V1.2
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x1802
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf1750/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:04:0 ("VIA VT82C686 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xf400 0xd0000/0x4000!
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8363 Host" rev 0x02
viaagp0 at pchb0: v2
agp0 at viaagp0: aperture at 0xe0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0 "VIA VT8363 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon X1300/X1550" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: irq 11
drm0 at radeondrm0
"ATI Radeon X1300/X1550 Sec" rev 0x00 at pci1 dev 0 function 1 not configured
pcib0 at pci0 dev 4 function 0 "VIA VT82C686 ISA" rev 0x22
pciide0 at pci0 dev 4 function 1 "VIA VT82C571 IDE" rev 0x10: ATA66, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <TRANSCEND>
wd0: 1-sector PIO, LBA, 3823MB, 7831152 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <ASUS, DVD-ROM E608, 1.40> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 4 function 2 "VIA VT83C572 USB" rev 0x10: irq 5
uhci1 at pci0 dev 4 function 3 "VIA VT83C572 USB" rev 0x10: irq 5
viapm0 at pci0 dev 4 function 4 "VIA VT82C686 SMBus" rev 0x30: SMI
iic0 at viapm0
lm1 at iic0 addr 0x2d: AS99127F
viapm0: 24-bit timer at 3579545Hz
viapm0: HWM disabled
cmpci0 at pci0 dev 9 function 0 "C-Media Electronics CMI8738/C3DX Audio" rev
0x10: irq 5
audio0 at cmpci0
opl at cmpci0 not configured
mpu at cmpci0 not configured
re0 at pci0 dev 11 function 0 "Realtek 8169" rev 0x10: RTL8110S (0x0400), irq
10, address 00:e0:4c:77:5a:88
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0
sili0 at pci0 dev 12 function 0 "CMD Technology SiI3124 SATA" rev 0x02: irq 11
scsibus1 at sili0: 4 targets
sd0 at scsibus1 targ 2 lun 0: <ATA, ST31000528AS, CC38> SCSI3 0/direct fixed
naa.5000c5001a7566dd
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
sd1 at scsibus1 targ 3 lun 0: <ATA, ST31000528AS, CC46> SCSI3 0/direct fixed
naa.5000c50032947ef1
sd1: 953869MB, 512 bytes/sector, 1953525168 sectors
uhci2 at pci0 dev 13 function 0 "VIA VT83C572 USB" rev 0x61: irq 5
uhci3 at pci0 dev 13 function 1 "VIA VT83C572 USB" rev 0x61: irq 11
ehci0 at pci0 dev 13 function 2 "VIA VT6202 USB" rev 0x63: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
pciide1 at pci0 dev 17 function 0 "Promise PDC20265" rev 0x02: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 10 for native-PCI interrupt
pciide1: channel 0 disabled (no drives)
atapiscsi1 at pciide1 channel 1 drive 0
scsibus2 at atapiscsi1: 2 targets
cd1 at scsibus2 targ 0 lun 0: <PLEXTOR, DVDR PX-708A, 1.03> ATAPI 5/cdrom
removable
cd1(pciide1:1:0): using PIO mode 4
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
ugen0 at uhub1 port 1 "American Power Conversion Back-UPS BR 800 FW:9.o2 .D
USB FW:o2" rev 1.10/1.06 addr 2
uhidev0 at uhub1 port 2 configuration 1 interface 0 "Logitech USB-PS/2 Optical
Mouse" rev 2.00/30.00 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 8 buttons, Z dir
wsmouse0 at ums0 mux 0
uhub5 at uhub2 port 2 "ALCOR Generic USB Hub" rev 1.10/1.00 addr 2
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on wd0a (3c88d4fa37f4527b.a) swap on wd0b dump on wd0b
